The replica install was unilaterally removing KRB5CCNAME from
os.environ in some cases. Instead check first to see if it is
present and only remove in that case.
Fixes: https://pagure.io/freeipa/issue/9446
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
389DS supports BDB and LMDB backends. FreeIPA installation fails with
LMDB backend since it tries to apply tuning for BDB backend.
Instead, tuning for BDB should be applied only when 389DS uses BDB
backend.
Fixes: https://pagure.io/freeipa/issue/9435
Signed-off-by: Viktor Ashirov <vashirov@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Write a new krb5.conf in case any values changed finding the
right server to configure against (e.g. for CA, KRA) and
ensure the API connection is to the remote server that
will be installed against.
When finding a CA or KRA during initial replica installation
set the remote master as well. The order is:
- existing server value in /etc/ipa/default.conf
- the chosen CA host if the server doesn't provide one
- the chosen KRA host if the server doesn't provide one
This is more or less heirarchical. If a server is provided
then that is considered first. If it provides all the
optional services needed (CA and/or KRA) then it will
be used. Otherwise it will fall back to a server that provides
all the required services.
In short, providing --server either at client install or
with ipa-replica-install is no guarantee that it will
define all topology. This may be unexpected behavior.
For the case of adding a CA or KRA things are effectively
unchanged. This type of install does not appear to be
impacted by affinity issues.
Fixes: https://pagure.io/freeipa/issue/9289
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Clean up and remove obsolete code from ipa-replica-install. For several
versions replica installer first ensures that a host is an IPA client,
then promotes the client to a replica. The client installer code sets up
CA stores like IPA_CA_CRT already.
Related: https://pagure.io/freeipa/issue/9272
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
The ipaidpuser objectclass is required for the attribute ipaidpsub.
When a user is created or modified with --idp-user-id, the operation
must ensure that the objectclass is added if missing.
Add a test for user creation and user modification with --idp-user-id.
Fixes: https://pagure.io/freeipa/issue/9433
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The XML API is already deprecated and will be removed in some
future release.
All but the updateCRL API has an equivalent in REST. The upstream
dogtag project documents most of the API at
https://github.com/dogtagpki/pki/wiki/REST-API . I say most
because not every API includes sample input/output. The
pki ca-cert command is a good substitute for seeing how the API
is used by their own tooling.
This changes no pre-existing conventions. All serial numbers are
converted to decimal prior to transmission and are treated as
strings to avoid previous limitations with sizing (which would
have been exacerbated by random serial numbers).
Fixes: https://pagure.io/freeipa/issue/9345
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
An attempt to do this was already coded but the wrong
argument was used. It was passing in the location name and
not the map name so the map wouldn't be completely removed.
Include a test to verify that the map is gone after removing
it by calling automountlocation-tofiles which will fail if the
map wasn't properly removed.
Fixes: https://pagure.io/freeipa/issue/9397
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ipa-server-guard reads a lock file in order to
check if the lock is still taken by comparing
the stored value, for instance:
expire = 20230810155452589311
with the current datetime.
The expire value needs to be timezone-aware in
order to be compared with "now" which is also tz aware.
Related: https://pagure.io/freeipa/issue/9425
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ipa-cert-fix compares the current datetime with the
value obtained from a cert.not_valid_after.
With the fix for #9425, not_valid_after is timezone
aware and cannot be compared to a naive datetime.
Make the datetime "now" timezone aware.
Related: https://pagure.io/freeipa/issue/9425
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The following warning is displayed on a system running with Python 3.12:
-------------------
/usr/lib/python3.12/site-packages/ipalib/rpc.py:925: DeprecationWarning:
datetime.utcnow() is deprecated and scheduled for removal in a future
version. Use timezone-aware objects to represent datetimes in UTC:
datetime.now(datetime.UTC).
timestamp=datetime.datetime.utcnow())
-------------------
Fixes: https://pagure.io/freeipa/issue/9425
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
admin is required for trust operations
Note that testing for removing the last member is now
irrelevant because admin must always exist so the test
for it was removed, but the code check remains. It is done
after the protected member check.
Fixes: https://pagure.io/freeipa/issue/8878
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Use of 'ipa idp-add --provider' was supposed to allow override scope and
other IdP options. The defaults are provided by the IdP template and
were actually not overridden. Fix this.
Fixes: https://pagure.io/freeipa/issue/9421
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The user and stageuser commands return the following error
when the user is created/updated with a non existing idp:
$ ipa user-add testuser --first test --last user --idp dummy
ipa: ERROR: no such entry
The error is not descriptive enough and has been modified to
display instead:
$ ipa user-add testuser --first test --last user --idp dummy
ipa: ERROR: External IdP configuration dummy not found
Fixes: https://pagure.io/freeipa/issue/9416
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
A host uses Location (nshostlocation) as an optional hint where
a host may phsyically be located (e.g. Lab 2). This will result in
an attribute in the host entry like:
nshostlocation: Lab 2
A server uses location (ipalocation) to identify which DNS location
the server is part of (e.g. prague). This will result in an attribute
in the server entry like:
ipalocation: idnsname=prague,cn=locations,cn=etc,dc=example,dc=test
They are completely different animals.
https://pagure.io/freeipa/issue/9317
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
In order to know if ca/kra is installed locally, the code
is calling pki-server subsystem-show _subsystem_
and ensures that "Enabled: True" is in the output.
If a subsystem fails to start, the command returns
"Enabled: False" but it doesn't mean that the subsystem
is not installed, it just means that it is not active
right now.
Same output if the subsystem has been disabled with
pki-server subsystem-disable _subsystem_.
The correct way to check if a subsystem is installed is to
ensure that subsystem-show does not exit on error and
contains "Enabled: ", whatever the value.
Related: https://pagure.io/freeipa/issue/9330
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The uninstaller is stopping all the services before
calling pkidestroy to uninstall the CA.
With PKI 11.4+ this sequence fails as pkidestroy tries
to connect to PKI server in order to unregister from the
security domain. The error interrupts the full completion
of pkidestroy, is logged but doesn't make ipa uninstallation
fail.
The issue is that trying to re-install later on would fail because
pkidestroy did not completely uninstall the CA.
To avoid this, call pkidestroy before shutting down the services.
Also add an uninstall_check method that restarts IPA if it is
not running, and use pkidestroy --force to make sure that PKI
is uninstalled even if restart failed.
Fixes: https://pagure.io/freeipa/issue/9330
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The upgrade checks the replication agreements to ensure that
some attributes are excluded from replication. The agreements
are stored in entries like
cn=serverToreplica,cn=replica,cn=_suffix_,cn=mapping tree,cn=config
but those entries are managed by the replication topology plugin
and should not be updated directly. The consequence is that the update
of the attributes fails and ipa-server-update prints an error message:
Error caught updating nsDS5ReplicatedAttributeList: Server is unwilling
to perform: Entry and attributes are managed by topology plugin.No direct
modifications allowed.
Error caught updating nsDS5ReplicatedAttributeListTotal: Server is
unwilling to perform: Entry and attributes are managed by topology
plugin.No direct modifications allowed.
The upgrade continues but the replication is not excluding
passwordgraceusertime.
Instead of editing the agreements, perform the modifications on
the topology segments.
Fixes: https://pagure.io/freeipa/issue/9385
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
During the installation of IPA server, the installer adds a drop-in
file in /etc/systemd/system/pki-tomcatd@pki-tomcat.service.d/ipa.conf
that ensures the CA is reachable before the start command returns.
If the file is missing (for instance because the server was installed
with an old version before this drop-in was created), the upgrade
should add the file.
Fixes: https://pagure.io/freeipa/issue/9381
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
There are 2 possible methods to rename users and groups:
- either use ipa user|group-mod oldname --rename newname
- or use settattr:
ipa user-mod oldname --setattr uid=newname
ipa group-mod oldname --setattr cn=newname
The first method validates the new name but the second method
doesn't. Add a validation to make both methods consistent
Fixes: https://pagure.io/freeipa/issue/9396
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
cert-find is a rather complex beast because it not only
looks for certificates in the optional CA but within the
IPA LDAP database as well. It has a process to deduplicate
the certificates since any PKI issued certificates will
also be associated with an IPA record.
In order to obtain the data to deduplicate the certificates
the cert from LDAP must be parser for issuer and serial number.
ipaldap has automation to determine the datatype of an
attribute and will use the ipalib.x509 IPACertificate class to
decode a certificate automatically if you access
entry['usercertificate'].
The downside is that this is comparatively slow. Here is the
parse time in microseconds:
cryptography 0.0081
OpenSSL.crypto 0.2271
ipalib.x509 2.6814
Since only issuer and subject are required there is no need to
make the expensive IPACertificate call.
The IPACertificate parsing time is fine if you're parsing one
certificate but if the LDAP search returns a lot of certificates,
say in the thousands, then those microseconds add up quickly.
In testing it took ~17 seconds to parse 5k certificates (excluding
transmission overhead, etc).
cert-find when there are a lot of certificates has been
historically slow. It isn't related to the CA which returns
large sets (well, 5k anyway) in a second or two. It was the
LDAP comparision adding tens of seconds to the runtime.
When searching with the default sizelimit of 100 the time is
~10s without this patch. With it the time is 1.5s.
CLI times from before and after searching for all certs:
original:
-------------------------------
Number of entries returned 5038
-------------------------------
real 0m15.507s
user 0m0.828s
sys 0m0.241s
using cryptography:
real 0m4.037s
user 0m0.816s
sys 0m0.193s
Fixes: https://pagure.io/freeipa/issue/9331
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This reverts commit 1f30cc6527.
The problem isn't with python-cryptography, it is with the
IPACertificate class which does way more work on a certificate
than is necessary in cert-find.
Related: https://pagure.io/freeipa/issue/9331
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This reverts commit 191880bc9f.
The problem isn't with python-cryptography, it is with the
IPACertificate class which does way more work on a certificate
than is necessary in cert-find.
Related: https://pagure.io/freeipa/issue/9331
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Without this the installation is successful but the DNS
records will not work. With --setup-dns there will be no
A record for the host (only an NS record) and the PTR record
will point to the domain name.
Fixes: https://pagure.io/freeipa/issue/9003
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The passkey is a long string and not user-friendly.
Instead of showing the whole passkey in the webui, only show
the id part and a string for discoverable or server-side passkey.
Related: https://pagure.io/freeipa/issue/9261
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Apart from server-side credentials passkey should also register
discoverable credentials.
ipa user-add-passkey --register now supports an additional option,
--cred-type server-side|discoverable
that is propagated to passkey_child command.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This condition was checked in group-add but not in group-mod.
This evaluation is done later in the pre_callback so that all
the other machinations about posix are already done to make
it easier to tell whether this condition is true or not.
Fixes: https://pagure.io/freeipa/issue/8990
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Since November 2020, Active Directory KDC generates a new type of
signature as part of the PAC. It is called "ticket signature", and is
generated based on the encrypted part of the ticket. The presence of
this signature is not mandatory in order for the PAC to be accepted for
S4U requests.
However, the behavior is different for MIT krb5. Support was added as
part of the 1.20 release, and this signature is required in order to
process S4U requests. Contrary to the PAC extended KDC signature, the
code generating this signature cannot be isolated and backported to
older krb5 versions because this version of the KDB API does not allow
passing the content of the ticket's encrypted part to IPA.
This is an issue in gradual upgrade scenarios where some IPA servers
rely on 1.19 and older versions of MIT krb5, while others use version
1.20 or newer. A service ticket that was provided by 1.19- IPA KDC will
be rejected when used by a service against a 1.20+ IPA KDC for S4U
requests.
On Fedora, CentOS 9 Stream, and RHEL 9, when the krb5 version is 1.20 or
newer, it will include a downstream-only update adding the
"optional_pac_tkt_chksum" KDB string attribute allowing to tolerate the
absence of PAC ticket signatures, if necessary.
This commit adds an extra step during the installation and update
processes where it adds a "pacTktSignSupported" ipaConfigString
attribute in "cn=KDC,cn=[server],cn=masters,cn=ipa,cn=etc,[basedn]" if
the MIT krb5 version IPA what built with was 1.20 or newer.
This commit also set "optional_pac_tkt_chksum" as a virtual KDB entry
attribute. This means the value of the attribute is not actually stored
in the database (to avoid race conditions), but its value is determined
at the KDC starting time by search the "pacTktSignSupported"
ipaConfigString in the server list. If this value is missing for at
least of them is missing, enforcement of the PAC ticket signature is
disabled by setting "optional_pac_tkt_chksum" to true for the local
realm TGS KDB entry.
For foreign realm TGS KDB entries, the "optional_pac_tkt_chksum" virtual
string attribute is set to true systematically, because, at least for
now, trusted AD domains can still have PAC ticket signature support
disabled.
Given the fact the "pacTktSignSupported" ipaConfigString for a single
server is added when this server is updated, and that the value of
"optional_pac_tkt_chksum" is determined at KDC starting time based on
the ipaConfigString attributes of all the KDCs in the domain, this
requires to restart all the KDCs in the domain after all IPA servers
were updated in order for PAC ticket signature enforcement to actually
take effect.
Fixes: https://pagure.io/freeipa/issue/9371
Signed-off-by: Julien Rische <jrische@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The commands ipa user-add or ipa group-add validate the
format of the user/group name and display the following
message when it does not conform to the expectations:
invalid 'login': may only include letters, numbers, _, -, . and $
The format is more complex, for instance '1234567' is an invalid
user name but the failure is inconsistent with the error message.
Modify the error message to point to ipa help user/group and add
more details in the help message.
Same change for idoverrideuser and idoverridegroup:
The user/group name must follow these rules:
- cannot contain only numbers
- must start with a letter, a number, _ or .
- may contain letters, numbers, _, ., or -
- may end with a letter, a number, _, ., - or $
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2150217
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
If a cert-find fails on the CA side we get a Message tag
containing a string describing the failure plus the java stack
trace. Pull out the first part of the message as defined by the
first colon and include that in the error message returned to
the user.
The new message will appear as:
$ ipa cert-find
ipa: ERROR: Certificate operation cannot be completed: Unable to search for certificates (500)
vs the old generic message:
ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (500)
This can be reproduced by setting nssizelimit to 100 on the
pkidbuser. The internal PKI search returns err=4 but the CA
tries to convert all values into certificates and it fails. The
value needs to be high enough that the CA can start but low
enough that you don't have to create hundreds of certificates
to demonstrate the issue.
https://pagure.io/freeipa/issue/9369
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The command ipa idview-show NAME has a post callback
method that replaces the ID override anchor with the corresponding
user name.
For instance the anchor
ipaanchoruuid=:SID:S-1-5-21-3951964782-819614989-3867706637-1114
is replaced with the name of the ad user aduser@ad.test.
The method loops on all the anchors and for each one performs the
resolution, which can be a costly operation if the anchor is for
a trusted user. Instead of doing a search for each anchor, it is
possible to read the 'ipaOriginalUid' value from the ID override
entry.
Fixes: https://pagure.io/freeipa/issue/9372
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When ipa cert-find --all is called, the function prints the
certificate public bytes. The code recently switched to OpenSSL.crypto
and the objects OpenSSL.crypto.X509 do not have the method
public_bytes(). Use to_cryptography() to transform into a
cryptography.x509.Certificate before calling public_bytes().
Related: https://pagure.io/freeipa/issue/9331
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
cert-find is a rather complex beast because it not only
looks for certificates in the optional CA but within the
IPA LDAP database as well. It has a process to deduplicate
the certificates since any PKI issued certificates will
also be associated with an IPA record.
In order to obtain the data to deduplicate the certificates
the cert from LDAP must be parser for issuer and serial number.
ipaldap has automation to determine the datatype of an
attribute and will use the python-cryptography engine to
decode a certificate automatically if you access
entry['usercertificate'].
The downside is that this is comparatively slow. Here is the
parse time in microseconds:
OpenSSL.crypto 175
pyasn1 1010
python-cryptography 3136
The python-cryptography time is fine if you're parsing one
certificate but if the LDAP search returns a lot of certificates,
say in the thousands, then those microseconds add up quickly.
In testing it took ~17 seconds to parse 5k certificates.
It's hard to overstate just how much better the cryptography
Python interface is. In the case of OpenSSL really the only
certificate fields easily available are serial number, subject
and issuer. And the subject/issuer are in the OpenSSL reverse
format which doesn't compare nicely to the cryptography format.
The DN module can correct this.
Fortunately for cert-find we only need serial number and issuer,
so the OpenSSL module fine. It takes ~2 seconds.
pyasn1 is also relatively faster but switch to it would require
subtantially more effort for less payback.
cert-find when there are a lot of certificates has been
historically slow. It isn't related to the CA which returns
large sets (well, 5k anyway) in a second or two. It was the
LDAP comparision adding tens of seconds to the runtime.
CLI times from before and after:
original:
-------------------------------
Number of entries returned 5011
-------------------------------
real 0m21.155s
user 0m0.835s
sys 0m0.159s
using OpenSSL:
real 0m5.747s
user 0m0.864s
sys 0m0.148s
OpenSSL is forcibly lazy-loaded so it doesn't conflict with
python-requests. See ipaserver/wsgi.py for the gory details.
Fixes: https://pagure.io/freeipa/issue/9331
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Antonio Torres <antorres@redhat.com>
The sizelimit option was not being passed into the dogtag
ra_find() command so it always returned all available certificates.
A value of 0 will retain old behavior and return all certificates.
The default value is the LDAP searchsizelimit.
Related: https://pagure.io/freeipa/issue/9331
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Antonio Torres <antorres@redhat.com>
DS does not enable plugins unless nsslapd-dynamic-plugins is enabled or
DS is restarted. The DNA plugin creates its configuration entries with
some delay after the plugin is enabled.
DS is now restarted after the DNA plugin is enabled so it can create the
entries while Dogtag and the rest of the system is installing. The
updater `update_dna_shared_config` no longer blocks and waits for two
times 60 seconds for `posix-ids` and `subordinate-ids`.
Fixes: https://pagure.io/freeipa/issue/9358
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
We need to deepcopy the list of default objectlasses from IPA config
before assigning it to an entry, in order to avoid further modifications of the
entry affect the cached IPA config.
Fixes: https://pagure.io/freeipa/issue/9349
Signed-off-by: Antonio Torres <antorres@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
When you run "ipa idp-show <idp reference>" the IdP reference is shown
as "Identity Provider server name". This is confusing as we are pointing
to the earlier created IdP reference rather than a server. Other files
are updated as well to reflect this change.
Additionally some typos are fixed with this patch too.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
If a server with a CA has been marked as hidden and
contains the last A or AAAA address then that address
would remain in the ipa-ca entry.
This is because update-dns-system-records did not delete
values, it just re-computed them. So if no A or AAAA
records were found then the existing value was left.
Fixes: https://pagure.io/freeipa/issue/9195
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Replace comparisons of "if value" with "if value is not None"
in order to handle 0.
Add a short reference to the man page to indicat that a cert
or request retention time of 0 means remove at the next
execution.
Also indicate that the search time limit is in seconds.
Fixes: https://pagure.io/freeipa/issue/9325
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Alexander Bokovoy
Rob Crittenden
Viktor Ashirov
Christian Heimes
Florence Blanc-Renaud
Miro Hrončok
Julien Rische
Antonio Torres
Thorsten Scherf
Carla Martinez