SAN IP address validation, while determining the zone for a DNS name
or IP address, does not handle missing zones. The resulting
dns.resolver.NoNameservers exception is not caught. As a result,
InternalError is returned to client.
Update cert-request IP address name validation to handle this case.
Part of: https://pagure.io/freeipa/issue/7451
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Update the IP address validation to raise different error messages
for:
- inability to reach IP address from a DNS name
- missing PTR records for IP address
- asymmetric PTR / forward records
If multiple scenarios apply, indicate the first error (from list
above).
The code should now be a bit easier to follow. We first build dicts
of forward and reverse DNS relationships, keyed by IP address. Then
we check that entries for each iPAddressName are present in both
dicts. Finally we check for PTR-A/AAAA symmetry.
Update the tests to check that raised ValidationErrors indicate the
expected error.
Part of: https://pagure.io/freeipa/issue/7451
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
During SAN validation, it is possible that more than one
iPAddressName does not match a known IP address for the DNS names in
the SAN. But only one unmatched IP address is reported. Update the
error message to mention all unmatched iPAddressName values.
Part of: https://pagure.io/freeipa/issue/7451
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Generalise _san_dnsname_ips to allow arbitrary cname depths. This
also clarifies the code and avoids boolean blindness. Update the
call site to maintain the existing behvaiour (one cname allowed).
Part of: https://pagure.io/freeipa/issue/7451
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Collect only qualified DNS names for IPAddress validation. This is
necessary because it is undecidable whether the name 'ninja' refers
to 'ninja.my.domain.' or 'ninja.' (assuming both exist). Remember
that even a TLD can have A records.
Now that we are only checking qualified names for the purpose of
IPAddressName validation, remove the name length hack from
_san_dnsname_ips().
Part of: https://pagure.io/freeipa/issue/7451
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Allow issuing certificates with IP addresses in the subject
alternative name (SAN), if all of the following are true.
* One of the DNS names in the SAN resolves to the IP address
(possibly through a CNAME).
* All of the DNS entries in the resolution chain are managed by
this IPA instance.
* The IP address has a (correct) reverse DNS entry that is managed
by this IPA instance
https://pagure.io/freeipa/issue/7451
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
host-del and service-del are slow because cert revokation is implemented
inefficiently. The internal cert_find() call retrieves all certificates
from Dogtag.
The workaround special cases service and host find without additional RA
search options. A search for service and host certs limits the scope to
certificate with matching subject common name.
See: https://pagure.io/freeipa/issue/7835
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
'Origin' for IPA login page is 'httpS://xxx'. But 'configured' link
has URL like 'http://xxx/ssbrowser.html'.
Since IPA web server doesn't use any kind of Access-Control-Allow-Origin
rules Mozilla Firefox blocks Cross-Origin request due to the Same Origin
policy violation.
So, just follow the Same Origin policy.
Fixes: https://pagure.io/freeipa/issue/7832
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
The command 'ipa service-del badservice' used to fail with an internal
server error, because check_required_principal() could not handle a
principal that is not a service principal. All del commands have less
strict error checking of primary keys so they can reference any stored
key, even illegal ones.
check_required_principal() skips required principal check if the
principal is not a service principal. A non-service principal can never
be a required principal.
Fixes: https://pagure.io/freeipa/issue/7793
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ipa idoverrideuser-find and ...group-find have an --anchor argument. The
anchor argument used to support only anchor UUIDs like
':IPA:domain:UUID' or ':SID:S-sid'. The find commands now detect regular
user or group names and translate them to anchors.
Fixes: https://pagure.io/freeipa/issue/6594
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Move LDAP service discovery and service definitions from
ipaserver.install to ipaserver. Simplify and unify different
implementations in favor of a single implementation.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
A non-admin user which has the "User Administrator" role cannot
add a user with ipa user-add --radius=<proxy> because the
call needs to read the radius proxy server entries.
The fix adds a System permission for reading radius proxy server
entries (all attributes except the ipatokenradiussecret). This
permission is added to the already existing privileges "User
Administrators" and "Stage User Administrators", so that the role
"User Administrator" can call ipa [stage]user-add|mod --radius=<proxy>
Fixes: https://pagure.io/freeipa/issue/7570
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The command "ipa user-add --radius-username" fails with
ipa: ERROR: attribute "ipatokenRadiusUserName" not allowed
because it does not add the objectclass ipatokenradiusproxyuser
that is required by the attribute ipatokenradiususername.
The issue happens with ipa user-add / stageuser-add / user-mod / stageuser-mod.
The fix adds the objectclass when needed in the pre_common_callback method
of baseuser_add and baseuser_mod (ensuring that user and stageuser commands
are fixed).
Fixes https://pagure.io/freeipa/issue/7569
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Address a bug in the code block for attributeLevelRights for old clients.
The backward compatibility code for deprecated options was not triggered,
because the new name was checked against wrong dict.
Coverity Scan issue 323649, Copy-paste error
The copied code will not have its intended effect.
In postprocess_result: A copied piece of code is inconsistent with the
original (CWE-398)
See: Fixes: https://pagure.io/freeipa/issue/7753
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
If groups or hostgroups have been removed after automember rules have been
created using them, then automember-rebuild, automember-add, host-add and
more commands could fail.
A new command has been added to the ipa tool:
ipa automember-find-orphans --type={hostgroup,group} [--remove]
This command retuns the list of orphan automember rules in the same way as
automember-find. With the --remove option the orphan rules are also removed.
The IPA API version has been increased and a test case has been added.
Using ideas from a patch by: Rob Crittenden <rcritten@redhat.com>
See: https://pagure.io/freeipa/issue/6476
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Replace six.moves and six.StringIO/BytesIO imports with cannonical
Python 3 packages.
Note: six.moves.input behaves differently than builtin input function.
Therefore I left six.moves.input for now.
See: https://pagure.io/freeipa/issue/7715
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
As for now the 'Add' dialog title, which is initialized within
details of the entity, contains translated concatenated texts,
like:
'Add ${other_entity} into ${entity} ${primary_key}',
where 'other_entity' and 'entity' are also translatable texts.
This construction is used via method 'show_add_dialog' of
association_facet for the all 'Add' actions within details
of entities.
The concatenation leads to a bad quality translation and
should be changed to an entire sentence.
From now a mentioned title is taken from a spec and should be
specified explicitly.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
Florence Blanc-Renaud
Fraser Tweedale
Ian Pilcher
Christian Heimes
Stanislav Levin
Thomas Woerner