Remove a duplicated policy change which sets the gracelimit
to 3.
We don't typically run tests individually but as a whole. If
we ever need to call this one test directly we can ignore
failures.
Fixes: https://pagure.io/freeipa/issue/9167
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The graceperiod plugin was only being enabled on new
installations. Enable also on upgrade.
Loading a new plugin requires a restart. Do so if a
new one is configured.
Fixes: https://pagure.io/freeipa/issue/1539
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Test for RFE: Improve error message with more detail for
ipa-replica-install command. If the replication agreement already
exists, check if the error message contains
a particular command needed to delete it.
Related: https://pagure.io/freeipa/issue/9162
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Add support for bind grace limiting per
https://datatracker.ietf.org/doc/html/draft-behera-ldap-password-policy-06
389-ds provides for alternative naming than the draft, using those
instead: passwordGraceUserTime for pwdGraceUserTime and
passwordGraceLimit for pwdGraceLoginLimit.
passwordGraceLimit is a policy variable that an administrator
sets to determine the maximum number of LDAP binds allowed when
a password is marked as expired. This is suported for both the
global and per-group password policies.
passwordGraceUserTime is a count per-user of the number of binds.
When the passwordGraceUserTime exceeds the passwordGraceLimit then
all subsequent binds will be denied and an administrator will need
to reset the user password.
If passwordGraceLimit is less than 0 then grace limiting is disabled
and unlimited binds are allowed.
Grace login limitations only apply to entries with the objectclass
posixAccount or simplesecurityobject in order to limit this to
IPA users and system accounts.
Some basic support for the LDAP ppolicy control is enabled such that
if the ppolicy control is in the bind request then the number of
remaining grace binds will be returned with the request.
The passwordGraceUserTime attribute is reset to 0 upon a password
reset.
user-status has been extended to display the number of grace binds
which is stored centrally and not per-server.
Note that passwordGraceUserTime is an operational attribute.
https://pagure.io/freeipa/issue/1539
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The test test_ipahealthcheck.py::TestIpaHealthCheckWithoutDNS
is installing the server without DNS but calls the installer
with --no-dnssec-validation option.
Remove the --no-dnssec-validation option as it is incompatible
with a non-DNS setup.
Fixes: https://pagure.io/freeipa/issue/9152
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
healthcheck related tests are failing because of the below issue
"client @0x7f8ee47c4d48 : servfail cache hit (CD=0)"
and as a result healthcheck related packages are not downloaded on test
system.
Hence adding the --no-dnssec-validation option to install_master
and install_replica function
https://pagure.io/freeipa/issue/9151
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The test is calling getcert rekey -G DSA in order to rekey
a certificate with a DSA key, but DSA support has been disabled
in the default crypto policy, and certmonger does not support it
any more (see the BZ
https://bugzilla.redhat.com/show_bug.cgi?id=2066439)
Remove the test as it's not relevant anymore. The rekey
operation is tested anyway in other tests:
- test_certmonger_rekey_keysize
- test_rekey_keytype_RSA
- test_rekey_request_id
Fixes: https://pagure.io/freeipa/issue/9140
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The file epn.conf has been updated when fixing issue 9145
and the test test_epn.py::TestEPN::test_EPN_config_file
is comparing its sha256sum with the checksum of the
shipped file from the package ipa-client-epn.
The expected checksum needs to be updated.
Fixes: https://pagure.io/freeipa/issue/9146
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The tests
TestNonPosixAutoPrivateGroup::test_idoverride_with_auto_private_group
and
TestPosixAutoPrivateGroup::test_gidnumber_not_corresponding_existing_group
are expected to fail until SSSD fixes issues 5988 and 5989.
They currently define an xfail_context with a condition based on
sssd version but that condition is wrong (as of today, no version
of sssd provides the fix).
Remove the wrong condition so that the test is always expected to fail.
Fixes: https://pagure.io/freeipa/issue/9141
Reviewed-By: Anuja More <amore@redhat.com>
topologysegment name can be different depending on suffix.
This patch determines and supply the name of topologysgement
as per the suffix
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
There is no guarantee for the topologysegement name, it could be
master-to-replica or replica-to-master. If it is master-to-replica
then --right should be used with the command else --left.
Fixes: https://pagure.io/freeipa/issue/9137
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
This test checks that when
'pki.server.healthcheck.clones.connectivity_and_data' check is run
'Source 'pki.server.healthcheck.clones.connectivity_and_data' not found'
is not displayed.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2041995
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The test is calling run_command with a list of arguments:
run_command(['rm', '-f', paths.CERTMONGER_REQUESTS_DIR + '/*'])
but this format does not support shell expansion.
Replace with a str parameter:
run_command('rm -fv' + paths.CERTMONGER_REQUESTS_DIR + '/*')
to make sure all the files in the directory are actually removed.
Fixes: https://pagure.io/freeipa/issue/8506
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
test_ipahealthcheck_expiring is moving the date in the future
in order to check that certmonger properly warns about expiring
certificates, then uninstalls the master.
The uninstallation randomly fails with a DBus error communicating
with certmonger because of a contention between certmonger being
waken up by the call to stop tracking certs and the certmonger
helpers trying to renew the certs.
The test is stopping PKI server, then moves the date in the future.
At this point, certmonger is still running (we are testing that
getcert list properly warns about near expiration). This means that
chances are high that certmonger has enough time to launch the CA helper
for renewal, that takes the lock. But since PKI is down, the helper
remains running for a while and does not release the lock. Then
certmonger is stopped, the tracking files are removed, certmonger is
restarted.
To avoid the contention, manually remove the tracking before
calling uninstall and remove the renewal lock file.
Fixes: https://pagure.io/freeipa/issue/9123
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This makes automount configurable only using sssd and not LDAP.
The reason is that authselect 1.3 no longer supports
user-nsswitch.conf which is where we made direct changes to the
nss configuration on Fedora/RHEL.
The equivalent option was removed from ipa-client-install in
https://pagure.io/freeipa/issue/7671
Fixes: https://pagure.io/freeipa/issue/9084
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
SPAKE is based on the crypto primitives which are not FIPS compliant
yet. This means that in FIPS mode use of 'hardened' authentication
indicator is not possible. Skip corresponding tests in FIPS mode.
Related: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
paramiko cannot be used in FIPS mode. We have few tests that import
generic methods from test_otp (add_token/del_token) and those tests fail
in FIPS mode due to unconditional 'import paramiko'.
Instead, move 'import paramiko' to the ssh_2f() helper which is not used
in FIPS mode (the whole SSH 2FA test is skipped then).
Related: https://pagure.io/freeipa/issue/9119
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
The subCA keys are loaded out-of-band after creation into the
CA so they may have been replicated but not loaded. Give more
time for them to appear in the remote CA.
Use a loop for the checking instead of a raw sleep because most
of the time this is very fast (< 15 seconds) but sometimes it
requires just a bit more. Allow up to 60 seconds.
To avoid output difference, strip the token name out of certutil
output. We don't care about the token a certificate is stored
in, the internal or the FIPS token. We just care that they exist
on both servers and that the keys match.
Apparently in some cases the token name is displayed and not in
others so lets normalize the output to make comparisons more
consistent.
Fixes: https://pagure.io/freeipa/issue/9096
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Pylint 2.9 introduced new check:
> New checker consider-using-dict-items. Emitted when iterating over
dictionary keys and then indexing the same dictionary with the key
within loop body.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint 2.9.0 new checker:
> Emitted when accessing only the first or last element of str.split().
The first and last element can be accessed by using str.split(sep,
maxsplit=1)[0] or str.rsplit(sep, maxsplit=1)[-1] instead.
Fixes: https://pagure.io/freeipa/issue/9117
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The example text included a trailing dot which isn't actually
allowed in a system hostname (just DNS). Remove the suggestion
to include it and strip off any trailing dot so that the install
can proceed.
Related: https://pagure.io/freeipa/issue/9111
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The refactor change 9094dfc had a slight error where the
user-input provided value in input wasn't being validated. Only
the command-line or the current FQDN was being verified so
if the FQDN was bad any value input by the user was being skipped.
Fixes: https://pagure.io/freeipa/issue/9111
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
There is some contention between certmonger starting during the
uninstallation process in order to stop the tracking and activity
going on within certmonger helpers.
As near as I can tell certmonger is not running, then IPA is
stopped in order to uninstall, then certmonger is started to stop
the tracking. certmonger checks cert status on startup but since
IPA isn't running it can't get a host ticket. During this time any
request over DBus may time out, causing a test to fail when we're
just trying to clean up.
https://pagure.io/freeipa/issue/8506
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The test TestIpaClientAutomountFileRestore expects a
specific order for the automount sources to query
in /etc/nsswitch.conf.
With authselect update 1.3.0, the databases are sorted in
order of likelihood and the following line in seen:
automount: files sss
instead of
automount: sss files
Since the test doesn't care about the order but rather about
the list of sources, ignore the order.
Fixes: https://pagure.io/freeipa/issue/9067
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Following test cases would be checked:
- when called with --principal (it should then prompt for a password)
- when called with --principal / --password
- when called without principal and password but with a kerberos TGT,
kinit admin done before calling ipa-replica-conncheck
- when called without principal and password, and without any kerberos
TGT (it should default to principal=admin and prompt for a password)
related: https://pagure.io/freeipa/issue/9047
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
When empty cert request is submitted to certmonger, it goes to
segfault. This fix test that if something like this happens,
certmonger should gracefuly handle it
and some PEP8 fixes
related: https://pagure.io/certmonger/issue/191
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
The test sets 389-ds nsslapd-idletimeout to 60s, then does a
kinit with an otp token (which makes ipa-otpd create a LDAP
connection), then sleeps for 60s. The expectation is that
ns-slapd will detect that the LDAP conn from ipa-otpd is idle
and close the connection.
According to 389ds doc, the idle timeout is enforced when the
connection table is walked. By doing a ldapsearch, the test
"wakes up" ns-slapd and forces the detection of ipa-otpd
idle connection.
Fixes: https://pagure.io/freeipa/issue/9044
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Fixture `expire_certs` moves date back after renewing the certs.
This is causing the ipa-replica to fail. This fix first uninstalls
the server then moves back the date.
Fixes: https://pagure.io/freeipa/issue/9052
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
where {id} is an unknown authority ID.
Test Steps:
1. Setup a freeipa server and a replica
2. Stop ipa-custodia service on replica
3. Create a LWCA on the replica
4. Verify LWCA is recognized on the server
5. Run `ipa ca-show <LWCA>`
Signed-off-by: Sumedh Sidhaye <ssidhaye@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Fixture issue_and_expire_cert() kinit after moving the date to
expire certs. This fix is to rely on kinit from fixture.
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The integration tests that check backup-reinstall-restore
scenario need to clear sssd cache before checking the uid
of the admin user. For instance:
backup: saves the original admin uid
reinstall: creates a new admin uid, potentially cached by SSSD
restore: restores the original admin uid
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Rob Crittenden
Michal Polovka
Alexander Bokovoy
Florence Blanc-Renaud
Anuja More
Sudhir Menon
Mohammad Rizwan
Stanislav Levin
Julien Rische
Sumedh Sidhaye