The example text included a trailing dot which isn't actually
allowed in a system hostname (just DNS). Remove the suggestion
to include it and strip off any trailing dot so that the install
can proceed.
Related: https://pagure.io/freeipa/issue/9111
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The refactor change 9094dfc had a slight error where the
user-input provided value in input wasn't being validated. Only
the command-line or the current FQDN was being verified so
if the FQDN was bad any value input by the user was being skipped.
Fixes: https://pagure.io/freeipa/issue/9111
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
There is some contention between certmonger starting during the
uninstallation process in order to stop the tracking and activity
going on within certmonger helpers.
As near as I can tell certmonger is not running, then IPA is
stopped in order to uninstall, then certmonger is started to stop
the tracking. certmonger checks cert status on startup but since
IPA isn't running it can't get a host ticket. During this time any
request over DBus may time out, causing a test to fail when we're
just trying to clean up.
https://pagure.io/freeipa/issue/8506
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The test TestIpaClientAutomountFileRestore expects a
specific order for the automount sources to query
in /etc/nsswitch.conf.
With authselect update 1.3.0, the databases are sorted in
order of likelihood and the following line in seen:
automount: files sss
instead of
automount: sss files
Since the test doesn't care about the order but rather about
the list of sources, ignore the order.
Fixes: https://pagure.io/freeipa/issue/9067
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Following test cases would be checked:
- when called with --principal (it should then prompt for a password)
- when called with --principal / --password
- when called without principal and password but with a kerberos TGT,
kinit admin done before calling ipa-replica-conncheck
- when called without principal and password, and without any kerberos
TGT (it should default to principal=admin and prompt for a password)
related: https://pagure.io/freeipa/issue/9047
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
When empty cert request is submitted to certmonger, it goes to
segfault. This fix test that if something like this happens,
certmonger should gracefuly handle it
and some PEP8 fixes
related: https://pagure.io/certmonger/issue/191
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
The test sets 389-ds nsslapd-idletimeout to 60s, then does a
kinit with an otp token (which makes ipa-otpd create a LDAP
connection), then sleeps for 60s. The expectation is that
ns-slapd will detect that the LDAP conn from ipa-otpd is idle
and close the connection.
According to 389ds doc, the idle timeout is enforced when the
connection table is walked. By doing a ldapsearch, the test
"wakes up" ns-slapd and forces the detection of ipa-otpd
idle connection.
Fixes: https://pagure.io/freeipa/issue/9044
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Fixture `expire_certs` moves date back after renewing the certs.
This is causing the ipa-replica to fail. This fix first uninstalls
the server then moves back the date.
Fixes: https://pagure.io/freeipa/issue/9052
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
where {id} is an unknown authority ID.
Test Steps:
1. Setup a freeipa server and a replica
2. Stop ipa-custodia service on replica
3. Create a LWCA on the replica
4. Verify LWCA is recognized on the server
5. Run `ipa ca-show <LWCA>`
Signed-off-by: Sumedh Sidhaye <ssidhaye@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Fixture issue_and_expire_cert() kinit after moving the date to
expire certs. This fix is to rely on kinit from fixture.
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The integration tests that check backup-reinstall-restore
scenario need to clear sssd cache before checking the uid
of the admin user. For instance:
backup: saves the original admin uid
reinstall: creates a new admin uid, potentially cached by SSSD
restore: restores the original admin uid
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The standard installer now configures all the items needed
for SID generation. Add a new test with the following scenario:
- install IPA server
- create an active user
- ensure the user's entry has an attribute ipantsecurityidentifier
- ensure that the kerberos ticket for the user contains PAC data
by using the utility ipa-print-pac
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Previously, `test_master_install_ca1` and `test_master_install_ca2`
attempt to create tempdirs on local host and later write some
content into the returned paths on remote host. This fails if
a remote host is a local one.
The existent `create_temp_file` function has been extended to
support `suffix` option of `mktemp`.
Fixes: https://pagure.io/freeipa/issue/9013
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The above test is installing 2 Let's Encrypt certificates:
the root ISRG Root X1 and a subca. The subca expired Oct 6 and needs to
be replaced with a valid one, otherwise ipa-cacert-manage install
refuses to install it.
Fixes: https://pagure.io/freeipa/issue/9006
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Get size of the log file immediately before main test action to avoid
capturing messages written to log during environment preparation.
Fixes https://pagure.io/freeipa/issue/8987
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The test TestIpaHealthCheckWithExternalCA::test_ipahealthcheck_ipaopensslchainvalidation
needs to be adapted with the new error message returned by
openssl verify when the provided certificate file does not exist.
The message changed with openssl3.
Fixes: https://pagure.io/freeipa/issue/8999
The logic of test_reset_password_unlock is twisted.
Currently it's doing:
- reset password on replicas[0]
- wait for replication on master
- kinit on master
The call to wait_for_replication should be done on
replicas[0], not on master, according to the method doc:
Note that this waits for updates originating on this host, not those
coming from other hosts.
Fixes: https://pagure.io/freeipa/issue/8975
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
MIT KRB5 1.15 introduced KDC service discovery with URI records.
_kerberos and _kpasswd URI records can provide TCP, UDP, and Kerberos
KDC-Proxy references. URI lookups take precedence over SRV lookups,
falling back to SRV lookups if no URI records are found.
Also reduce TTL for system records from one day to one hour. It allows
users to remove or update discovery entries in a timely fashion.
See: https://web.mit.edu/kerberos/krb5-latest/doc/admin/realm_config.html#kdc-discovery
Fixes: https://pagure.io/freeipa/issue/8968
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When a test is executed around midnight and is checking the
journal content with --since=date, it needs to specify the
whole date (with day and time) to avoid missing entries.
If for instance --since=23:59:00 is used and the current time is
now 00:01:00, --since=23:59:00 would refer to a date in the
future and no journal entry will be found.
Fixes: https://pagure.io/freeipa/issue/8953
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Francois Cami <fcami@redhat.com>
LDAP/HTTP/PKINIT certificates should be renewd on replica after
moving system date. Test was failing because ipa-cert-fix ran
while these cert was not renewd and it tried to fix it.
This test adds check for replication before calling ipa-cert-fix
on replica.
Fixes: https://pagure.io/freeipa/issue/8815
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
This test checks if ipa-cert-fix renews the certs on replica
after cert renewal on master.
related: https://pagure.io/freeipa/issue/7885
ipatests: refactor expire_cert_critical fixture
Defined method to move the date and refactor
expire_cert_critical fixture using it
ipatests: PEP8 fixes
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The test configures an external bind server on the ipa-server
(not the IPA-embedded DNS server) that allows unauthenticated nsupdates.
When the IPA client is registered using ipa-client-install,
DNS records are added for the client in the bind server using nsupdate.
The first try is using GSS-TIG but fails as expected, and the client
installer then tries with unauthenticated nsupdate.
Related : https://pagure.io/freeipa/issue/8402
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Use whole date when calling journalctl --since
ipa-otpd don't flush its logs to syslog immediately,
so check with run_repeatedly.
Also list failed units when ldap connection is
timed out.
Related: https://pagure.io/freeipa/issue/6587
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
tasks.create_active_user can fail in a subtle way when there
are two IPA servers due to replication delays.
Using the debug-enabled version of create_active_user helps
determine whether there is another underlying issue and, in
general, prevents the above problem.
Fixes: https://pagure.io/freeipa/issue/8944
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Rob Crittenden
Anuja More
Stanislav Levin
Mohammad Rizwan
Julien Rische
Florence Blanc-Renaud
Sumedh Sidhaye
Sergey Orlov
Christian Heimes
François Cami
Michal Polovka