It required support in dogtag which was added in 10.5.0.
This is only easily configurable during installation because
it will set ca.signing.defaultSigningAlgorithm to the
selected algorithm in CS.cfg
The certificate profiles will generally by default set
default.params.signingAlg=- which means use the CA default.
So while an existing installation will technically allow
SHA384withRSA it will require profile changes and/or
changing the defaultSigningAlgorithm in CS.cfg and
restarting (completely untested). And that won't affect
already issued-certificates.
https://pagure.io/freeipa/issue/8906
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
ipa-cert-fix man page needs to explain that certmonger may
trigger a renewal right after ipa-cert-fix completes because
certmonger does not notice the updated certificates.
Also add a similar note at the end of ipa-cert-fix.
Fixes: https://pagure.io/freeipa/issue/8702
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-otptoken-import.1 describes the -k option.
However, the long option --keyfile option is also available.
Therefore, add the --keyfile option to ipa-otptoken-import.1.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
There are no arguments in the --entry option,
but DN for the managed entry definition must actually be specified.
Therefore, add MANAGED_ENTRY as an argument.
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
There are no arguments in the --schema-file option,
but the Schema file in LDIF format must actually be specified.
Therefore, add FILE.ldif as an argument
In addition, the --schema option no longer exists, so remove the description.
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
ipa-winsync-migrate.1 has an explanation of options, but no arguments.
Therefore, add the arguments for --realm and --server.
Also, add a short option -U for --unattended.
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
In order to simplify the build process between upstream FreeIPA
and downstream builds (such as CentOS Stream) we are changing
some file references from FreeIPA to IPA (and Identity Management).
https://pagure.io/freeipa/issue/8669
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Traditionally in IPA 0 = success, 1 = error and then
specific error messages follow from that. Shift the
ipa-acme-manage return codes for "not installed" and
"not a CA" up by one.
https://pagure.io/freeipa/issue/8498
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
ACME requires an ipa-ca SAN to have a fixed URL to connect to.
If the Apache certificate is replaced by a 3rd party cert then
it must provide this SAN otherwise it will break ACME.
https://pagure.io/freeipa/issue/8498
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Add the ipa-acme-manage command which can be used to enable or
disable the IPA ACME service. It must be used on each server. In
the future we will implement deployment-wide configuration
(including enable/disable) of the ACME service via IPA API, with
configuration stored in and replicated by LDAP. But until then, we
need a simple command for administrators to use.
Part of: https://pagure.io/freeipa/issue/4751
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-backup does not check whether the IPA master it is running on has
all used roles installed. This can lead into situations where backups
are done on a CAless or KRAless host while these roles are used in the
IPA cluster. These backups cannot be used to restore a complete cluster.
With this change, ipa-backup refuses to execute if the roles installed
on the current host do not match the list of roles used in the cluster.
A --disable-role-check knob is provided to restore the previous behavior.
Fixes: https://pagure.io/freeipa/issue/8217
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Before removing a CA re-verify all the other CAs to ensure that
the chain is not broken. Provide a force option to handle cases
where the CA is expired or verification fails for some other
reason, or you really just want them gone.
https://pagure.io/freeipa/issue/8124
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Some options were not documented in the man page:
--version
-h, --help
-p DIRMAN_PASSWD (but the long name --dirman-password is in the man page)
-v, --verbose
-q, --quiet
--log-file=FILE
Fixes: https://pagure.io/freeipa/issue/8086
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When the --server option is provided to ipa-replica-install (1-step
install), make sure that the server offers all the required roles
(CA, KRA). If it's not the case, refuse the installation.
Note that the --server option is ignored when promoting from client to
replica (2-step install with ipa-client-install and ipa-replica-install),
meaning that the existing behavior is not changed in this use case:
by default the host specified in default.conf as server is used for
enrollment, but if it does not provide a required role, another host can
be picked for CA or KRA setup.
Fixes: https://pagure.io/freeipa/issue/7566
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Mention the new option in the man pages for CA, KRA, replica, and server
installation. The documentation must be improved once we have figured
out which options are going to be supported.
Fixes: pagure.io/freeipa/issue/5608
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Only a single cert in DER or PEM format would be loaded from the
provided file. Extend this to include PKCS#7 format and load all
certificates found in the file.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
https://pagure.io/freeipa/issue/7579
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
There were two separate issues:
1. If not enrolling on a pre-configured client then the ntp-server and
ntp-pool options are not being passed down to the client installer
invocation.
2. If the client is already enrolled then the ntp options are ignored
altogether.
In the first case simply pass down the options to the client
installer invocation.
If the client is pre-enrolled and NTP options are provided then
raise an exception.
https://pagure.io/freeipa/issue/7723
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Raise "Domain level 0 is not supported anymore" error if there are
remainaing args after parsing. Remove all "DOMAIN LEVEL 0" and
"DOMAIN LEVEL 1" prefixes from the man page.
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Raise "Domain level 0 is not supported anymore" error if there are
remainaing args after parsing. Remove all "DOMAIN LEVEL 0" and
"DOMAIN LEVEL 1" prefixes from the man page.
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
ipa-replica-prepare (script and man page) is only needed for DL0 support.
The script and man page are not installed anymore and also removed from
the spec file.
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
ipa-backup and ipa-restore now use GnuPG 2 for asymmetric encryption, too.
The gpg2 command behaves a bit different and requires a gpg2 compatible
config directory. Therefore the --keyring option has been deprecated.
The backup and restore tools now use root's GPG keyring by default.
Custom configuration and keyring can be used by setting GNUPGHOME
environment variables.
Fixes: https://pagure.io/freeipa/issue/7560
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Introduce server installation constants similar to the client
but only tie in SERVER_NOT_CONFIGURED right now.
For the case of not configured don't spit out the "See <some log>
for more information" because no logging was actually done.
In the case of ipa-backup this could also be confusing if the
--log-file option was also passed in because it would not be
used.
https://pagure.io/freeipa/issue/6843
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
FreeIPA will always force chrony service and disable any
other conflicting time synchronization daemon.
Add --ntp-server option to server manpage and note to NTP pool option.
Addresses: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Remove NTP server role from config.py.
Remove uneccesary variables and replaced untrack_file with restore_file.
Update typo in manpages and messages printed while installing.
Resolves: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Allow the MS/AD-CS target certificate template to be specified by
name or OID, via the new option --external-ca-profile.
Part of: https://pagure.io/freeipa/issue/6858
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Add the `--external-ca-type`, as known from `ipa-server-install` and
`ipa-ca-install`, to `ipa-cacert-manage`.
This allows creating IPA CA CSRs suitable for use with Microsoft CS using
`ipa-cacert-manage`:
```
ipa-cacert-manage renew --external-ca --external-ca-type=ms-cs
```
https://pagure.io/freeipa/issue/5799
Reviewed-By: David Kupka <dkupka@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Rob Crittenden
Florence Blanc-Renaud
MIZUTA Takeshi
Antonio Torres
Fraser Tweedale
François Cami
Christian Heimes
Thomas Woerner
Tibor Dudlák
Takeshi MIZUTA
amitkuma
Michal Reznik
Aleksei Slaikovskii
Jan Cholasta
René Genz