It took longer to create the cacert file in older version.
restarting the certmonger service creates the file at the location
specified by -F option. This fix is to check that cacert file
creates immediately after certificate goes into MONITORING state.
related: https://pagure.io/freeipa/issue/8105
Signed-off-by: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Moved the method so that it can be used by other modules too
Signed-off-by: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
`use_fully_qualified_names` is not a valid parameter for `[sssd]` section
of sssd.conf, it can be specified only in domain section.
According to `man sssd.conf` it simply requires all requests to be fully
qualified, otherwise no result will be found. It is irrelevant to the
test scenario, so removing it.
Related to: https://pagure.io/freeipa/issue/8219
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Replace usage of remote_ini_file with remote_sssd_config.
The latter verifies changes against schema which helps to spot the mistakes.
Related to: https://pagure.io/freeipa/issue/8219
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
There are three patterns for editing sssd.conf in tests now:
1. using modify_sssd_conf() which allows to modify only domain sections
2. using remote_ini_file
3. direct file editing using `sed`
This patch introduces new utility function which combines advantages of
first two approaches:
* changes are verified against schema, so that mistakes can be spotted
early
* has convenient interface for simple options modification,
both in domain and service sections
* allows sophisticated modifications through SSSDConfig object
Fixes: https://pagure.io/freeipa/issue/8219
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Add tests checking the behavior of ipa-adtrust-install when
adding trust agents:
- try calling the remote method trust_enable_agent with
a principal missing the required privilege.
- try adding a trust agent when the remote node is stopped.
The installer must detect that he's not able to run the remote
commands and print a WARNING.
- try adding a trust agent when the remote node is running.
The WARNING must not be printed as the remote configuration is done.
- try adding a trust agent with --enable-compat.
The WARNING must not be printed and the Schema Compatibility plugin
must be enabled (the entries
cn=users/groups,cn=Schema Compatibility,cn=plugins,cn=config
must contain a new attribute schema-compat-lookup-nsswitch
(=user/group).
Thanks to sorlov for the nightly test definitions and new test.
Related: https://pagure.io/freeipa/issue/7600
Co-authored-by: Sergey Orlov <sorlov@redhat.com>
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
The test is using the output of openssl to compare the SubCA issuer name
with the expected value.
Depending on the version of openssl, the issuer can be displayed
differently (with/without space around the = character). On RHEL 7.x,
there is no space by default while on Fedora the space is used.
Calling openssl with -nameopt space_eq forces a consistent output, always
adding space around =.
Reviewed-By: Sudhir Menon <sumenon@redhat.com>
This test is to check if recursion can be configured.
It checks if newly added file /etc/named/ipa-ext.conf
exists and /etc/named.conf should not have
'allow-recursion { any; };'. It also checks if ipa-backup
command backup the /etc/named/ipa-ext.conf file as well
related : https://pagure.io/freeipa/issue/8079
Signed-off-by: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The relative service weight output tries to show the relative
chance that any given master in a locaiton will be picked. This
didn't account for all masters having a weight of 0 which would
result in a divide-by-zero error.
Implement the following rules:
1. If all masters have weight == 0 then all are equally
weighted.
2. If any masters have weight == 0 then they have an
extremely small chance of being chosen, percentage is
0.1.
3. Otherwise it's percentage change is based on the sum of
the weights of non-zero masters.
https://pagure.io/freeipa/issue/8135
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The labels for memberservice_hbacsvc and memberservice_hbacsvcgroup are
only "Services" and "Service Groups" but they should be "HBAC Services"
and "HBAC Service Groups".
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add a little utility function to get the certmonger status
of a request id on a particular host and wait until it is either
failed on the CA or issued (or times out).
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
There was a regression caused in nightly run of test
TestBackupReinstallRestoreWithDNS of test_backup_and_restore
test suite because of PR#3962.
Signed-off-by: Kaleemullah Siddiqui <ksiddiqu@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
This is the first time running Pylint-2.4 over the whole IPA codebase.
```
Pylint on /usr/bin/python is running, please wait ...
internal error with sending report for module ['ipaserver/plugins/serverroles.py']
maximum recursion depth exceeded while calling a Python object
************* Module ipatests.test_integration.base
ipatests/test_integration/base.py:84: [W0125(using-constant-test), IntegrationTest.install] Using a conditional statement with a constant value)
************* Module ipaserver.install.ipa_cacert_manage
ipaserver/install/ipa_cacert_manage.py:522: [R1724(no-else-continue), CACertManage.delete] Unnecessary "elif" after "continue")
```
The latest Pylint (via the Tox task) checks only:
```
{envsitepackagesdir}/ipaclient \
{envsitepackagesdir}/ipalib \
{envsitepackagesdir}/ipapython
```
, while the distro-Pylint runs over all project but it is not fresh.
That's why these warnings/errors weren't exposed before now.
Concerning `internal error`: a fix was accepted by upstream:
https://github.com/PyCQA/pylint/issues/3245, but wasn't released yet.
Until that is done, Pylint just warns.
Related: https://pagure.io/freeipa/issue/8116
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Pylint is a static analysis tool and therefore, couldn't always
analyze dynamic stuff properly. Transformation plugins is a way
to teach Pylint how to handle such cases.
Particularly, with the help of FreeIPA own plugin, it is possible
to tell Pylint about instance fields having a duck-typing nature.
A drawback exposed here is that a static view (Pylint's) of code
should be consistent with an actual one, otherwise, codebase will
be polluted with various skips of pylint checks.
* added missing fields to ipatests.test_integration.base.IntegrationTest
* an attempt is made to clear `no-member` skips for ipatests
* removed no longer needed `pytest` module transformation
Related: https://pagure.io/freeipa/issue/8116
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Even though Pytest supports xunit style setups, unittest and nose
tests, this support is limited and may be dropped in the future
releases. Worst of all is that the mixing of various test
frameworks results in weird conflicts and of course, is not widely
tested.
This is a part of work to remove the mixing of test idioms in the
IPA's test suite:
1) replace unittest.TestCase subclasses
2) replace unittest test controls (SkipTest, fail, etc.)
3) replace unittest assertions
Related: https://pagure.io/freeipa/issue/7989
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Even though Pytest supports xunit style setups, unittest and nose
tests, this support is limited and may be dropped in the future
releases. Worst of all is that the mixing of various test
frameworks results in weird conflicts and of course, is not widely
tested.
This is a part of work to remove the mixing of test idioms in the
IPA's test suite:
1) replace xunit style
2) employ the fixtures' interdependencies
Related: https://pagure.io/freeipa/issue/7989
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This tests the following cases:
- deletion without nickname (expect fail)
- deletion with an unknown nickname (expect fail)
- deletion of IPA CA (expect fail)
- deletion of a root CA needed by a subCA (expect fail)
- deletion of a root CA needed by a subCA with --force (ok)
- deletion of a subca (ok)
As a side-effect this also tests install by installing the LE
root and a sub-ca. The sub-ca expires in 2021 but I tested in
the future the ipa-cacert-manage install doesn't do date
validation so for now this is ok.
https://pagure.io/freeipa/issue/8124
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The tests for backup_and_restore check that the ipa-backup command
compresses the tar file AFTER restarting IPA services by reading the
output and looking for a pattern with "gzip" before "Starting IPA service."
As the tar file name is randomly created, it sometimes happen that the
name contains gzip and in this case the test wrongly assumes that
the gzip cmd was called.
The fix makes a stricter comparison, looking for /bin/gzip.
Fixes: https://pagure.io/freeipa/issue/8170
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Test on replica for ipa-ca-install with options
--no-host-dns,--skip-schema-check,done changes in
ipatests/pytest_ipa/integration/tasks.py because
wants to pass few arguments to install_ca method
Signed-off-by: Jayesh <jgarg@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
This will first check if all services are running then it will stop
few service. After that it will restart all services and then check
the status and pid of services.It will also compare pid after ipactl
start and restart in case of start it will remain unchanged on the
other hand in case of restart it will change.
Signed-off-by: Jayesh Garg <jgarg@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
When 'ipa krbtpolicy-reset' is called, we need to reset all policy
settings, including per-indicator ones. Per-indicator policy uses
subtyped attributes (foo;bar), the current krbtpolicy-reset code does
not deal with those.
Add support for per-indicator policy reset. It is a bit tricky, as we
need to drop the values to defaults but avoid adding non-per-indicator
variants of the same attributes.
Add test to check that policy has been resetted by observing a new
Kerberos TGT for the user after its policy reset.
Fixes: https://pagure.io/freeipa/issue/8153
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Some integration tests (that were enabled in nightly CI but not
PR-CI) are failing due to changes in the error messages. Update the
error message assertions to get these tests going again.
Part of: https://pagure.io/freeipa/issue/8142
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Sometimes ssh command gets stuck, running manually without passing a command
to be executed this is returned:
```
$ ssh -o PasswordAuthentication=no -o IdentitiesOnly=yes \
-o StrictHostKeyChecking=no -l testsshuser \
-i /tmp/tmp.rQIT3KYScX master.ipa.test
Could not chdir to home directory /home/testsshuser: No such file or directory
```
This commit forces the homedir creation and adds a timeout to ssh.
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
umount calls including in cleanup do not wait.
The test failed once with:
"umount.nfs4: /home: device is busy"
which looks like a leftover open file descriptor.
Add wait periods before umount.
Fixes: https://pagure.io/freeipa/issue/8144
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Test that a repeated installation of the primary with DNS enabled
will lead to a already installed message and not in "DNS zone X
already exists in DNS" in check_zone_overlap.
The error is only occuring if domain is set explicitly in the command
line installer as check_zone_overlap is used in the domain_name validator.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The test is installing master +DNSSEC, then replica and migrates the DNSSEC
to the replica.
During teardown, the replica is removed with ipa server-del. This operation
deletes the entries cn=DNS and cn=DNSSEC on the master, but if the
replication is stopped before the operations are replicated on the replica,
the replica may end up with a dangling cn=DNSSEC entry and no cn=DNS entry.
In this case ipa-server-install --uninstall on the replica will fail.
The fix: uninstall the DNSSec master as the last step of teardown
Related: https://pagure.io/freeipa/issue/7985
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Client connections no longer override TLS version range and ciphers by
default. Instead clients use the default settings from the system's
crypto policy.
Minimum TLS version is now TLS 1.2. The default crypto policy on
RHEL 8 sets TLS 1.2 as minimum version, while Fedora 31 sets TLS 1.0 as
minimum version. The minimum version is configured with OpenSSL 1.1.1
APIs. Python 3.6 lacks the setters to override the system policy.
The effective minimum version is always TLS 1.2, because FreeIPA
reconfigures Apache HTTPd on Fedora.
Fixes: https://pagure.io/freeipa/issue/8125
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Paramiko is not compatible with FIPS mode. It uses MD5 on the client
side and does not support rsa-sha2 connections for RSA auth.
See: https://pagure.io/freeipa/issue/8129
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
The goal of the last test in test_crlgen_manage is to ensure that
ipa-server-install --uninstall can proceed if the server is the last one
in the topology, even if it is the CRL generation master.
The current code is wrong because it tries to uninstall the master
(which has already been uninstalled in the prev test), It should rather
uninstall replicas[0].
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The uninstall method of some tests can be skipped as the cleanup is
already done before.
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
At the end of any integration test, the method uninstall is called and
uninstalls master, replicas and clients.
Usually the master is the CA renewal master and DNSSec master, and
uninstallation may fail.
This commits modifies the uninstall method in order to:
- call 'ipa server-del replica' before running uninstall on a replica
- uninstall the replicas before uninstalling the master
Fixes: https://pagure.io/freeipa/issue/7985
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Mohammad Rizwan Yusuf
Sergey Orlov
Florence Blanc-RenaudandSergey Orlov
Anuja More
Rob Crittenden
Thomas Woerner
Kaleemullah Siddiqui
François Cami
Stanislav Levin
sumenon
Jayesh
Fraser Tweedale
Alexander Bokovoy
Armando Neto
Christian Heimes