389DS supports BDB and LMDB backends. FreeIPA installation fails with
LMDB backend since it tries to apply tuning for BDB backend.
Instead, tuning for BDB should be applied only when 389DS uses BDB
backend.
Fixes: https://pagure.io/freeipa/issue/9435
Signed-off-by: Viktor Ashirov <vashirov@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
DS does not enable plugins unless nsslapd-dynamic-plugins is enabled or
DS is restarted. The DNA plugin creates its configuration entries with
some delay after the plugin is enabled.
DS is now restarted after the DNA plugin is enabled so it can create the
entries while Dogtag and the rest of the system is installing. The
updater `update_dna_shared_config` no longer blocks and waits for two
times 60 seconds for `posix-ids` and `subordinate-ids`.
Fixes: https://pagure.io/freeipa/issue/9358
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The graceperiod plugin was only being enabled on new
installations. Enable also on upgrade.
Loading a new plugin requires a restart. Do so if a
new one is configured.
Fixes: https://pagure.io/freeipa/issue/1539
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Add support for bind grace limiting per
https://datatracker.ietf.org/doc/html/draft-behera-ldap-password-policy-06
389-ds provides for alternative naming than the draft, using those
instead: passwordGraceUserTime for pwdGraceUserTime and
passwordGraceLimit for pwdGraceLoginLimit.
passwordGraceLimit is a policy variable that an administrator
sets to determine the maximum number of LDAP binds allowed when
a password is marked as expired. This is suported for both the
global and per-group password policies.
passwordGraceUserTime is a count per-user of the number of binds.
When the passwordGraceUserTime exceeds the passwordGraceLimit then
all subsequent binds will be denied and an administrator will need
to reset the user password.
If passwordGraceLimit is less than 0 then grace limiting is disabled
and unlimited binds are allowed.
Grace login limitations only apply to entries with the objectclass
posixAccount or simplesecurityobject in order to limit this to
IPA users and system accounts.
Some basic support for the LDAP ppolicy control is enabled such that
if the ppolicy control is in the bind request then the number of
remaining grace binds will be returned with the request.
The passwordGraceUserTime attribute is reset to 0 upon a password
reset.
user-status has been extended to display the number of grace binds
which is stored centrally and not per-server.
Note that passwordGraceUserTime is an operational attribute.
https://pagure.io/freeipa/issue/1539
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
pylint 2.9 thinks that __add_principal is a class-level method that is
unused. It is a local function inside one of class methods and is used
directly inside that method.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
OpenLDAP 2.6+ finally deprecated -h and -p options in all its command
line tools. They are not allowed anymore and cause ldap* tools to stop
hard with 'unknown option' error.
Fix this by always using -H url option instead. Deriving default value
for -H url from the configuration file still works, it is only -h and -p
that were deprecated.
See also: https://bugs.openldap.org/show_bug.cgi?id=8618
Fixes: https://pagure.io/freeipa/issue/9106
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
New LDAP object class "ipaUserSubordinate" with four new fields:
- ipasubuidnumber / ipasubuidcount
- ipasubgidnumber / ipasgbuidcount
New self-service permission to add subids.
New command user-auto-subid to auto-assign subid
The code hard-codes counts to 65536, sets subgid equal to subuid, and
does not allow removal of subids. There is also a hack that emulates a
DNA plugin with step interval 65536 for testing.
Work around problem with older SSSD clients that fail with unknown
idrange type "ipa-local-subid", see: https://github.com/SSSD/sssd/issues/5571
Related: https://pagure.io/freeipa/issue/8361
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This allows for a consistent way to retrieve the value from
LDAP. The method is used to find an existing entry. It is not usable
to add or remove entries.
Moving it in the code allows the value to always be set in the
substitution dictionary and not rely on a specific caller.
It was moved to installutils.py to avoid circular import.
https://pagure.io/freeipa/issue/8885
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The installer now stop and patches dse.ldif only when the option
--dirsrv-config-file is used. LDBM nsslapd-db-locks are increased in a
new step.
This speeds up installer by 4 or more seconds on a fast system.
Related: https://pagure.io/freeipa/issue/8521
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The new lib389-based installer configured 389-DS with LDAPI support and
autobind for root. nsslapd-ldapiautobind is enabled by lib389.
cn=root-autobind,cn=config entry is no longer needed.
nsslapd-ldapimaptoentries is kept enabled for future use.
Related: https://pagure.io/freeipa/issue/8521
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Index definitions were split across four files. indices.ldif contained
the initial subset of indices. Three update files partly duplicated the
indices and partly added new indices.
All indices are now defined in a single update file that is sorted
alphanumerically.
The changeset avoids two additional index tasks and reduces installation
time by 5 to 10 seconds.
Fixes: https://pagure.io/freeipa/issue/8493
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
nsslapd-db-lock was moved from cn=config,cn=ldbm database,cn=plugins,cn=config
entry to cn=bdb subentry. Manual patching of dse.ldif was no longer
working. Installations with 389-DS 1.4.3 and newer are affected.
Low lock count can affect performance during high load, e.g. mass-import
of users or lots of concurrent connections.
Bump minimal DS version to 1.4.3. Fedora 32 and RHEL 8.3 have 1.4.3.
Fixes: https://pagure.io/freeipa/issue/8515
See: https://pagure.io/freeipa/issue/5914
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
New classes for user and group names provide a convenient way to access
the uid and primary gid of a user / gid of a group. The classes also
provide chown() and chgrp() methods to simplify common operations.
The wrappers are subclasses of builtin str type and behave like ordinary
strings with additional features. The pwd and grp structs are retrieved
once and then cached.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Instruct lib389 to not create its self-signed CA and temporary
self-signed certificate. FreeIPA uses local connections and Unix socket
for bootstrapping.
Fixes: https://pagure.io/freeipa/issue/8502
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This patche removes 93 pylint deprecation warnings due to invalid escape
sequences (mostly 'invalid escape sequence \d') on unicode strings.
Signed-off-by: Rafael Guterres Jeffman <rjeffman@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The variable is intended to control the timeout for replication
events. If someone had significantly reduced it via configuration
then it could have caused certmogner requests to fail due to timeouts.
Add replication_wait_timeout, certmonger_wait_timeout and
http_timeout to the default.conf man page.
Related: https://pagure.io/freeipa/issue/7971
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
When the DS certificate gets untracked then tracked again (via
dsinstance.start_tracking_certificate()), it loses its profile
configuration. Although it is the default profile, we want to
retain the explicit reference. Ensure we add the profile when
re-tracking the DS certificate.
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
For now, FreeIPA supports SELinux things as they are in RedHat/Fedora.
But different distributions may have their own SELinux customizations.
This moves SELinux configuration out to platform constants:
- SELINUX_MCS_MAX
- SELINUX_MCS_REGEX
- SELINUX_MLS_MAX
- SELINUX_MLS_REGEX
- SELINUX_USER_REGEX
- SELINUX_USERMAP_DEFAULT
- SELINUX_USERMAP_ORDER
and applies corresponding changes to the test code.
Fixes: https://pagure.io/freeipa/issue/7996
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When creating ipa-client-samba tool, few common routines from the server
installer code became useful for the client code as well.
Move them to ipapython.ipautil and update references as well.
Fixes: https://pagure.io/freeipa/issue/3999
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
For now all the default shells of users and admin are hardcoded in
different parts of the project. This makes it impossible to run the
test suite against the setup, which has the default shell differed
from '/bin/sh'.
The single configuration point for the shell of users and admin is
added to overcome this limitation.
Fixes: https://pagure.io/freeipa/issue/7978
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
389-ds will change the default value of nsslapd-unhashed-pw-switch from 'on' to 'off'
For new or upgraded IPA instance, in case of winsync deployment the attribute is set
to 'on' and a warning is displayed. Else the attribute is set to 'nolog'
https://pagure.io/freeipa/issue/4812
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
This reverts commit 3509545897.
We cannot force increase in minimum SASL security factor until our
consumers are ready to deal with it. Unfortunately, realmd uses
anonymous connection for discovery and validation of IPA LDAP server.
The way it is done is fragile (it doesn't take into account an
advertised IPA version, only checks that 'IPA' string exists in the info
field) but since bumping of minimum SSF prevents reading IPA info field
using anonymous connection, client enrollment fails.
We should get back to bumping minimum SSF after realmd and other
potential consumers are fixed.
Reviewed-By: François Cami <fcami@redhat.com>
DsInstance.request_service_keytab() used to configure
/etc/sysconfig/dirsrv which is not needed anymore with 389-ds-base
1.4.1.2. Thus, the method became indistinguishable from the parent and
can be removed completely.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
On a replica, 389-DS is already configured for secure connections when
the CA is installed.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Replace get_ldap_uri() + LDAPClient() with new LDAPClient constructors
like LDAPClient.from_realm().
Some places now use LDAPI with external bind instead of LDAP with simple
bind. Although the FQDN *should* resolve to 127.0.0.1 / [::1], there is
no hard guarantee. The draft
https://tools.ietf.org/html/draft-west-let-localhost-be-localhost-04#section-5.1
specifies that applications must verify that the resulting IP is a
loopback API. LDAPI is always local and a bit more efficient, too.
The simple_bind() method also prevents the caller from sending a
password over an insecure line.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The helper function realm_to_serverid() and realm_to_ldap_uri() are
useful outside the server installation framework. They are now in
ipapython.ipaldap along other helpers for LDAP handling in FreeIPA.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The templates created the inf files for calling the 389-ds
installer setup-ds.pl. Now that lib389 is being used for installation
these are no longer necessary.
Related: https://pagure.io/freeipa/issue/4491
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
DS now comes with certain SSL capabilities turned on after
installation. Previously, we did not expect this and were
blindly forcing everything on without checking, whether it
needs turning on. This would result in failures if the
config entries are already set the way we want. Relax this
configuration.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
DS now comes with nsslapd-security turned on and its own CA
cert in its NSS database. We're re-setting the NSS database
and setting our own CA cert to it, the DS pin file therefore
needs to be updated with the new password after this reset.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
During uninstallation, we're using serverid which we get from
sysrestore.state. This was not set in the newer install,
return it back.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
During parallel replica installation, a request sometimes fails with
CA_REJECTED or CA_UNREACHABLE. The error occur when the master is
either busy or some information haven't been replicated yet. Even
a stuck request can be recovered, e.g. when permission and group
information have been replicated.
A new function request_and_retry_cert() automatically resubmits failing
requests until it times out.
Fixes: https://pagure.io/freeipa/issue/7623
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Tune 389-DS replication settings to improve performance and avoid
timeouts. During installation of a replica, the value of
nsDS5ReplicaBindDnGroupCheckInterval is reduced to 2 seconds. At the end
of the installation, the value is increased sensible production
settings. This avoids long delays during replication.
See: https://pagure.io/freeipa/issue/7617
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Add absolute_import from __future__ so that pylint
does not fail and to achieve python3 behavior in
python2.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Add storage='NSSDB' to various places. It makes it a bit easier to track
down NSSDB usage.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
The import_ca_certs_{file,nssdb} methods were actually exporting
CA certificates from LDAP to different formats. The new names should
better reflect what these methods are actually doing.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Change some built-in assumptions that Apache has an NSS certificate
database.
Configure mod_ssl instead of mod_nss. This is mostly just changing
the directives used with some slight syntactical differences.
Drop mod_nss-specific methods and functions.
There is some mention of upgrades here but this is mostly a
side-effect of removing things necessary for the initial install.
TODO:
- backup and restore
- use user-provided PKCS#12 file for the certificate and key
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Viktor Ashirov
Christian Heimes
Rob Crittenden
Stanislav Levin
Alexander Bokovoy
Rafael Guterres Jeffman
Fraser Tweedale
Thierry Bordaz
Stanislav Laznicka
William Brown
Thomas Woerner