test_hostname_parameter: Test for issue 2692 ipa-server-install ignores --hostname:
check whether hostname provided in `--hostname` parameter is being taken into account and set as new hostname without prompting for it again
test_ad_subpackage_dependency: Test for issue 4011 ipa-server-install crashes when AD subpackage is not installed:
test if ipa-server installation succeeds without `freeipa-ipa-server-trust-ad` installed
test_backup_of_cs_cfg_should_be_created: Test for issue 4166 Backup CS.cfg before modifying it:
test if ipa-server installer backs up CS.cfg before modifying it
test_installer_wizard_should_prompt_for_DNS: Test for issue 2575 [RFE] Installer wizard should prompt for DNS:
test if installer is asking for DNS setup details if not provided as parameter
Related: https://pagure.io/freeipa/issue/2692
Related: https://pagure.io/freeipa/issue/4011
Related: https://pagure.io/freeipa/issue/4166
Related: https://pagure.io/freeipa/issue/2575
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
During client installation, the installer calls sudo -V
to check if sudo command is installed. The output must not
be displayed in stdout.
Related: https://pagure.io/freeipa/issue/8767
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
TestMaskInstall is a usual integration tests and should
install freeipa server during test run.
"ipaserver" template provides pre-install freeipa server and
is intended for use with webui and xmlrpc tests.
Reviewed-By: Francois Cami <fcami@redhat.com>
Some tests are individually stopping a service and call
ipactl status to ensure it is stopped. They need to use
run_command with raiseonerr=False as ipactl status now
exits with 3 when one of the IPA services is down
(since commit 928ab51).
Related: https://pagure.io/freeipa/issue/8588
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Checking that IPA cert has been added to trust
store is needed to verify that installation
of the server is correct. This cert should also
be removed on uninstall to prevent failures
on further installations.
Related: https://pagure.io/freeipa/issue/8614
Signed-off-by: Antonio Torres <antorres@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
The KRA was previously configured with Internal CA profiles
which did not work with the IPA RA.
Use public, common profiles to manage renewal of the KRA
subsystem certificates.
https://pagure.io/freeipa/issue/8545
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The test test_installation.py::TestInstallMaster::test_selinux_avcs
is failing when no AVCs are detected because it is calling
journalctl --full --grep=AVC--since=yesterday
and the command exits with return code 1.
Call the command with raiseonerr=False to support this case.
Fixes: https://pagure.io/freeipa/issue/8541
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
ipa-custodia tests will fail if the ipa.pp override module from
freeipa-selinux is not correctly installed, loaded, and enabled.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
nsslapd-db-lock was moved from cn=config,cn=ldbm database,cn=plugins,cn=config
entry to cn=bdb subentry. Manual patching of dse.ldif was no longer
working. Installations with 389-DS 1.4.3 and newer are affected.
Low lock count can affect performance during high load, e.g. mass-import
of users or lots of concurrent connections.
Bump minimal DS version to 1.4.3. Fedora 32 and RHEL 8.3 have 1.4.3.
Fixes: https://pagure.io/freeipa/issue/8515
See: https://pagure.io/freeipa/issue/5914
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Instruct lib389 to not create its self-signed CA and temporary
self-signed certificate. FreeIPA uses local connections and Unix socket
for bootstrapping.
Fixes: https://pagure.io/freeipa/issue/8502
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-server-certinstall takes a slightly different code path if
the replacement certificate is IPA-issued so exercise that path.
This replaces the Apache cert with itself which is a bit of a no-op
but it still goes through the motions.
https://pagure.io/freeipa/issue/8204
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
It was found that if an account was created with a name corresponding to
an account local to a system, such as 'root', was created via IPA, such
account could access any enrolled machine with that account, and the local
system privileges. This also bypass the absence of explicit HBAC rules.
root principal alias
-------------------
The principal "root@REALM" is now a Kerberos principal alias for
"admin". This prevent user with "User Administrator" role or
"System: Add User" privilege to create an account with "root" principal
name.
Modified user permissions
-------------------------
Several user permissions no longer apply to admin users and filter on
posixaccount object class. This prevents user managers from modifying admin
acounts.
- System: Manage User Certificates
- System: Manage User Principals
- System: Manage User SSH Public Keys
- System: Modify Users
- System: Remove Users
- System: Unlock user
``System: Unlock User`` is restricted because the permission also allow a
user manager to lock an admin account. ``System: Modify Users`` is restricted
to prevent user managers from changing login shell or notification channels
(mail, mobile) of admin accounts.
New user permission
-------------------
- System: Change Admin User password
The new permission allows manipulation of admin user password fields. By
default only the ``PassSync Service`` privilege is allowed to modify
admin user password fields.
Modified group permissions
--------------------------
Group permissions are now restricted as well. Group admins can no longer
modify the admins group and are limited to groups with object class
``ipausergroup``.
- System: Modify Groups
- System: Remove Groups
The permission ``System: Modify Group Membership`` was already limited.
Notes
-----
Admin users are mostly unaffected by the new restrictions, except for
the fact that admins can no longer change krbPrincipalAlias of another
admin or manipulate password fields directly. Commands like ``ipa passwd
otheradmin`` still work, though. The ACI ``Admin can manage any entry``
allows admins to modify other entries and most attributes.
Managed permissions don't install ``obj.permission_filter_objectclasses``
when ``ipapermtargetfilter`` is set. Group and user objects now have a
``permission_filter_objectclasses_string`` attribute that is used
by new target filters.
Misc changes
------------
Also add new exception AlreadyContainsValueError. BaseLDAPAddAttribute
was raising a generic base class for LDAP execution errors.
Fixes: https://pagure.io/freeipa/issue/8326
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1810160
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
/etc/named.conf is now owned by IPA. The file is overwritten on
installation and all subsequent updates. All user modification will be
lost. Config file creation and update use the same code paths.
This simplifies upgrade process a lot. There is no errprone fiddling
with config settings any more.
During upgrade there is a one-time backup of named.conf to
named.conf.ipa-backup. It allows users to salvage their customization
and move them to one of two user config files which are included by
named.conf.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Add integration test that confirms that on CA-ful installation, the
(non-3rd-party) HTTP certificate bears the ipa-ca.$DOMAIN DNS name.
For detailed discussion on the purpose of this change and the design
decisions made, see `git log -1 $THIS_COMMIT~4`.
Part of: https://pagure.io/freeipa/issue/8186
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Moved the method so that it can be used by other modules too
Signed-off-by: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This test is to check if recursion can be configured.
It checks if newly added file /etc/named/ipa-ext.conf
exists and /etc/named.conf should not have
'allow-recursion { any; };'. It also checks if ipa-backup
command backup the /etc/named/ipa-ext.conf file as well
related : https://pagure.io/freeipa/issue/8079
Signed-off-by: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add a little utility function to get the certmonger status
of a request id on a particular host and wait until it is either
failed on the CA or issued (or times out).
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint is a static analysis tool and therefore, couldn't always
analyze dynamic stuff properly. Transformation plugins is a way
to teach Pylint how to handle such cases.
Particularly, with the help of FreeIPA own plugin, it is possible
to tell Pylint about instance fields having a duck-typing nature.
A drawback exposed here is that a static view (Pylint's) of code
should be consistent with an actual one, otherwise, codebase will
be polluted with various skips of pylint checks.
* added missing fields to ipatests.test_integration.base.IntegrationTest
* an attempt is made to clear `no-member` skips for ipatests
* removed no longer needed `pytest` module transformation
Related: https://pagure.io/freeipa/issue/8116
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Test on replica for ipa-ca-install with options
--no-host-dns,--skip-schema-check,done changes in
ipatests/pytest_ipa/integration/tasks.py because
wants to pass few arguments to install_ca method
Signed-off-by: Jayesh <jgarg@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
This will first check if all services are running then it will stop
few service. After that it will restart all services and then check
the status and pid of services.It will also compare pid after ipactl
start and restart in case of start it will remain unchanged on the
other hand in case of restart it will change.
Signed-off-by: Jayesh Garg <jgarg@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Test that a repeated installation of the primary with DNS enabled
will lead to a already installed message and not in "DNS zone X
already exists in DNS" in check_zone_overlap.
The error is only occuring if domain is set explicitly in the command
line installer as check_zone_overlap is used in the domain_name validator.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Test to check replica install against specific server. It uses master and
replica1 without CA and having custodia service stopped. Then try to
install replica2 from replica1 and expect it to get fail as specified server
is not providing all the services.
related ticket: https://pagure.io/freeipa/issue/7566
Signed-off-by: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Problem:
If a replica installation fails before all the services have been enabled then
it could leave things in a bad state.
ipa-replica-manage del <replica> --cleanup --force
invalid 'PKINIT enabled server': all masters must have IPA master role enabled
Test Steps:
1. Setup server
2. Setup replica
3. modify the replica entry on Master:
dn: cn=KDC,cn=<replica hostname>,cn=masters,cn=ipa,cn=etc,dc=<test>,dc=<realm>
changetype: modify
delete: ipaconfigstring
ipaconfigstring: enabledService
dn: cn=KDC,cn=<replica hostname>,cn=masters,cn=ipa,cn=etc,dc=<test>,dc=<realm>
add: ipaconfigstring
ipaconfigstring: configuredService
4. On master,
run ipa-replica-manage del <replicaFQDN> --cleanup --force
Related Ticket: https://pagure.io/freeipa/issue/7929
Signed-off-by: Sumedh Sidhaye <ssidhaye@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The test runs rpm -V in order to check that the file
permissions are consistent with the expectations set
in the spec file. The file mode, owner and group are
checked.
Related to https://pagure.io/freeipa/issue/7934
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Look for SELinux violation after installing a master with CA, KRA, and
DNS with DNSSEC. The test does not fail yet, because there are known
SELinux violations.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The p11-kit configuration injects p11-kit-proxy into all NSS databases.
Amongst other p11-kit loads SoftHSM2 PKCS#11 provider. This interferes
with 389-DS, certmonger, Dogtag and other services. For example certmonger
tries to open OpenDNSSEC's SoftHSM2 token, although it doesn't use it at
all. It also breaks Dogtag HSM support testing with SoftHSM2.
IPA server does neither need nor use SoftHSM2 proxied by p11-kit.
Related: https://pagure.io/freeipa/issue/7810
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
On non-usrmerge systems (e.g., Debian), bash, mv, cp, cat, tail,
keyctl, and gzip live in /bin, not /usr/bin.
On usrmerge systems, /bin is a symlink to /usr/bin (or vice versa), so
this has no effect.
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
If the mask used during the installation is "too restrictive", ie.0027,
installing FreeIPA results in a broken server or replica.
Add two tests that expect an error message at install time to catch
too restrictive masks.
Related to: https://pagure.io/freeipa/issue/7193
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
In order to work with IPA and Yubikey, libyubikey is required.
Before the fix, if yubikey added without having packages, it used to
result in traceback. Now it the exception is handeled properly.
It needs Yubikey hardware to make command successfull. This test
just check of proper error thrown when hardware is not attached.
related ticket : https://pagure.io/freeipa/issue/6979
Signed-off-by: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
pylint 2.2.0 has a new checker for unnecessary pass statements. There is
no need to have a pass statement in functions or classes with a doc
string.
Fixes: https://pagure.io/freeipa/issue/7772
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Michal Polovka
Florence Blanc-Renaud
François Cami
Sergey Orlov
Antonio Torres
Rob Crittenden
Christian Heimes
Timo Aaltonen
Fraser Tweedale
Mohammad Rizwan Yusuf
Stanislav Levin
Jayesh
Thomas Woerner
Sumedh Sidhaye
Robbie Harwood
Varun Mylaraiah