Before removing a CA re-verify all the other CAs to ensure that
the chain is not broken. Provide a force option to handle cases
where the CA is expired or verification fails for some other
reason, or you really just want them gone.
https://pagure.io/freeipa/issue/8124
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Some options were not documented in the man page:
--version
-h, --help
-p DIRMAN_PASSWD (but the long name --dirman-password is in the man page)
-v, --verbose
-q, --quiet
--log-file=FILE
Fixes: https://pagure.io/freeipa/issue/8086
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When the --server option is provided to ipa-replica-install (1-step
install), make sure that the server offers all the required roles
(CA, KRA). If it's not the case, refuse the installation.
Note that the --server option is ignored when promoting from client to
replica (2-step install with ipa-client-install and ipa-replica-install),
meaning that the existing behavior is not changed in this use case:
by default the host specified in default.conf as server is used for
enrollment, but if it does not provide a required role, another host can
be picked for CA or KRA setup.
Fixes: https://pagure.io/freeipa/issue/7566
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Mention the new option in the man pages for CA, KRA, replica, and server
installation. The documentation must be improved once we have figured
out which options are going to be supported.
Fixes: pagure.io/freeipa/issue/5608
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Only a single cert in DER or PEM format would be loaded from the
provided file. Extend this to include PKCS#7 format and load all
certificates found in the file.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
https://pagure.io/freeipa/issue/7579
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
There were two separate issues:
1. If not enrolling on a pre-configured client then the ntp-server and
ntp-pool options are not being passed down to the client installer
invocation.
2. If the client is already enrolled then the ntp options are ignored
altogether.
In the first case simply pass down the options to the client
installer invocation.
If the client is pre-enrolled and NTP options are provided then
raise an exception.
https://pagure.io/freeipa/issue/7723
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Raise "Domain level 0 is not supported anymore" error if there are
remainaing args after parsing. Remove all "DOMAIN LEVEL 0" and
"DOMAIN LEVEL 1" prefixes from the man page.
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Raise "Domain level 0 is not supported anymore" error if there are
remainaing args after parsing. Remove all "DOMAIN LEVEL 0" and
"DOMAIN LEVEL 1" prefixes from the man page.
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
ipa-replica-prepare (script and man page) is only needed for DL0 support.
The script and man page are not installed anymore and also removed from
the spec file.
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
ipa-backup and ipa-restore now use GnuPG 2 for asymmetric encryption, too.
The gpg2 command behaves a bit different and requires a gpg2 compatible
config directory. Therefore the --keyring option has been deprecated.
The backup and restore tools now use root's GPG keyring by default.
Custom configuration and keyring can be used by setting GNUPGHOME
environment variables.
Fixes: https://pagure.io/freeipa/issue/7560
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Introduce server installation constants similar to the client
but only tie in SERVER_NOT_CONFIGURED right now.
For the case of not configured don't spit out the "See <some log>
for more information" because no logging was actually done.
In the case of ipa-backup this could also be confusing if the
--log-file option was also passed in because it would not be
used.
https://pagure.io/freeipa/issue/6843
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
FreeIPA will always force chrony service and disable any
other conflicting time synchronization daemon.
Add --ntp-server option to server manpage and note to NTP pool option.
Addresses: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Remove NTP server role from config.py.
Remove uneccesary variables and replaced untrack_file with restore_file.
Update typo in manpages and messages printed while installing.
Resolves: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Allow the MS/AD-CS target certificate template to be specified by
name or OID, via the new option --external-ca-profile.
Part of: https://pagure.io/freeipa/issue/6858
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Add the `--external-ca-type`, as known from `ipa-server-install` and
`ipa-ca-install`, to `ipa-cacert-manage`.
This allows creating IPA CA CSRs suitable for use with Microsoft CS using
`ipa-cacert-manage`:
```
ipa-cacert-manage renew --external-ca --external-ca-type=ms-cs
```
https://pagure.io/freeipa/issue/5799
Reviewed-By: David Kupka <dkupka@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
ipa-kra-install man page was missing a specific section for domain level 1.
This commits also fixes a wrong option short name (for --log-file) and
indents the text corresponding to -p DM_PASSWORD
https://pagure.io/freeipa/issue/6922
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
In domain level 1 ipa-ca-install does not require a replica-file. Update the
man page to distinguish the domain level 0 or 1 usage.
https://pagure.io/freeipa/issue/5831
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
The customers are often confused by ipa-cacert-manage install. The man page
should make it clear that IPA CA is not modified in any way by this command.
https://pagure.io/freeipa/issue/6795
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
KRA uninstallation is very likely to break the user's setup. Don't
allow it at least till we can be safely sure we are able to remove
it in a standalone manner without breaking anything.
https://pagure.io/freeipa/issue/6538
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
This patch allows to install KRA on first IPA server in one step using
ipa-server-install
This option improves containers installation where ipa-server can be
installed with KRA using one call without need to call docker exec.
Please note the the original `kra.install()` calls in
ipaserver/install/server/install.py were empty operations as it did
nothing, so it is safe to move them out from CA block
https://pagure.io/freeipa/issue/6731
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
Rob Crittenden
Florence Blanc-Renaud
Fraser Tweedale
Christian Heimes
Thomas Woerner
Tibor Dudlák
Takeshi MIZUTA
amitkuma
Michal Reznik
Aleksei Slaikovskii
Jan Cholasta
René Genz
Abhijeet Kasurde
Stanislav Laznicka
Martin Basti
Tomas Krizek
Martin Babinsky