Previously in order to enable the LDAP profile subsystem
the ca_enable_ldap_profile_subsystem() would check the
current value of the profile subsystem class parameter in
CS.cfg. If the parameter was still set to the default value
(i.e. ProfileSubsystem), the code would change it to
LDAPProfileSubsystem.
There is a effort in PKI to clean up the profile subsystem
classes which may require changing the default value for
this parameter. However, this improvement is blocked since
the ca_enable_ldap_profile_subsystem() is implicitly assuming
that the default value will always be ProfileSubsystem.
This patch modifies the code such that instead of checking
for a specific value that needs to be changed, it will check
whether it has the desired value already. This mechanism
will reduce potential conflicts with future PKI improvements.
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Commit 49cf5ec64b fixed a bug that
prevented migration from externally-signed to self-signed IPA CA.
But it introduced a subtle new issue: certmonger-initiated renewal
renews an externally-signed IPA CA as a self-signed CA.
To resolve this issue, introduce the `--force-self-signed' flag for
the dogtag-ipa-ca-renew-agent script. Add another certmonger CA
definition that calls this script with the `--force-self-signed'
flag. Update dogtag-ipa-ca-renew-agent to only issue a self-signed
CA certificate if the existing certificate is self-signed or if
`--force-self-signed' was given. Update `ipa-cacert-manage renew'
to supply `--force-self-signed' when appropriate.
As a result of these changes, certmonger-initiated renewal of an
externally-signed IPA CA certificate will not issue a self-signed
certificate.
Fixes: https://pagure.io/freeipa/issue/8176
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
urllib3 now supports post-handshake authentication with TLS 1.3. Enable
TLS 1.3 support for Apache HTTPd.
The update depends on bug fixes for TLS 1.3 PHA support in urllib3 and
Apache HTTPd. New builds are available in freeipa-master COPR and in
F30/F31.
Overwrite crypto-policy on Fedora only. Fedora 31 and earlier have TLS
1.0 and 1.1 still enabled by default.
Fixes: https://pagure.io/freeipa/issue/8125
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
While [1] did open recursion, it also opened widely a security flaw.
This patch intends to close it back, while allowing operators to easily
add their open configuration within Bind9.
In order to allow operators to still open Bind recursion, a new file is
introduced, "ipa-ext.conf" (path might change according to the OS). This
file is not managed by the installer, meaning changes to it won't be
overridden.
Since it's included at the very end of the main configuration file, it
also allows to override some defaults - of course, operators have to be
careful with that.
Related-Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1754530
Fixes: https://pagure.io/freeipa/issue/8079
[1] https://github.com/freeipa/freeipa/commit/5f4c75eb28b3d50a35fbf3a86a6d842bce8e72f9
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
This patche removes 93 pylint deprecation warnings due to invalid escape
sequences (mostly 'invalid escape sequence \d') on unicode strings.
Signed-off-by: Rafael Guterres Jeffman <rjeffman@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Fixup for commit eb2313920e20bb4a74fc0abc52c496ccf2822dab.
configparser's set() method does not convert boolean to string
automatically. Use string '"False"', which is then interpreted as
boolean 'False' by getboolean().
Related: https://pagure.io/freeipa/issue/5608
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The HSM state is stored in fstore, so that CA and KRA installer use the
correct token names for internal certificates. The default token is
"internal", meaning the keys are stored in a NSSDB as usual.
Related: https://pagure.io/freeipa/issue/5608
Co-authored-by: Magnus K Karlsson <magnus-ka.karlsson@polisen.se>
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Profile-based renewal means we should always explicitly specify the
profile in tracking requests that use the dogtag-ipa-ca-renew-agent
renewal helper. This includes the IPA RA agent certificate. Update
CAInstance.configure_agent_renewal() to add the profile to the
tracking request. This also covers the upgrade scenario (because
the same method gets invoked).
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The search for the HTTP Certmonger tracking request uses an
incorrect parameter ('key-storage'), triggering removal and
recreation of tracking requests on every upgrade. Replace
'key-storage' with the correct parameter, 'key-file'.
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
For better diagnostics during upgrade, log the Certmonger tracking
requests that were not found (either because they do not exist, or
do not have the expected configuration).
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The upgrade routine checks tracking requests for CA system
certificates, IPA RA and HTTP/LDAP/KDC service certificates. If a
tracking request matching our expectations is not found, we stop
tracking all certificates, then create new tracking requests with
the correct configuration.
But the KRA was left out. Add checks for KRA certificates, and
remove/recreate KRA tracking requests when appropriate.
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The profile for every Dogtag system cert tracking request is now
explicitly specified. So remove the code that handled unspecified
profiles.
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The Dogtag "Server-Cert cert-pki-ca" certificate is treated
specially, with its own track_servercert() method and other special
casing. But there is no real need for this - the only (potential)
difference is the token name. Account for the token name difference
with a lookup method and treat all Dogtag system certs equally
w.r.t. tracking request creation and removal.
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
To use profile-based renewal (rather than "renewal existing cert"
renewal which is brittle against database corruption or deleted
certificate / request objects), Certmonger tracking requests for
Dogtag system certs must record the profile to be used.
Update the upgrade method that checks tracking requests to look for
the profile. Tracking requests will be recreated if the expected
data are not found. The code that actually adds the tracking
requests was updated in a previous commit.
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When creating ipa-client-samba tool, few common routines from the server
installer code became useful for the client code as well.
Move them to ipapython.ipautil and update references as well.
Fixes: https://pagure.io/freeipa/issue/3999
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The p11-kit configuration injects p11-kit-proxy into all NSS databases.
Amongst other p11-kit loads SoftHSM2 PKCS#11 provider. This interferes
with 389-DS, certmonger, Dogtag and other services. For example certmonger
tries to open OpenDNSSEC's SoftHSM2 token, although it doesn't use it at
all. It also breaks Dogtag HSM support testing with SoftHSM2.
IPA server does neither need nor use SoftHSM2 proxied by p11-kit.
Related: https://pagure.io/freeipa/issue/7810
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Debian has different paths and path suffix for font-awesome. Let's have
explicit paths for all our fonts.
Co-authored-by: Timo Aaltonen <tjaalton@debian.org>
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
During upgrade, the method add_systemd_user_hbac is creating
a hbacsvc and a hbacrule, but fails in python2 because of
unicode conversion errors.
The arguments should be defined as u'value'.
Fixes: https://pagure.io/freeipa/issue/7896
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Replace occurences of ('cn', 'masters'), ('cn', 'ipa'), ('cn', 'etc')
with api.env.container_masters.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The helper function realm_to_serverid() and realm_to_ldap_uri() are
useful outside the server installation framework. They are now in
ipapython.ipaldap along other helpers for LDAP handling in FreeIPA.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
authselect changed pam_systemd session from optional to required. When
the HBAC rule allow_all is disabled and replaced with more fine grained
rules, loginsi now to fail, because systemd's user@.service is able to
create a systemd session.
Add systemd-user HBAC service and a HBAC rule that allows systemd-user
to run on all hosts for all users by default. ipa-server-upgrade creates
the service and rule, too. In case the service already exists, no
attempt is made to create the rule. This allows admins to delete the
rule permanently.
See: https://bugzilla.redhat.com/show_bug.cgi?id=1643928
Fixes: https://pagure.io/freeipa/issue/7831
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ipa-server-update shows spurious warnings when updating a server, e.g.
No such file name in the index
Warning: NTP service entry was not found in LDAP.
Lower all log levels in ntpd_cleanup() to debug to not confuse the user.
Fixes: https://pagure.io/freeipa/issue/7829
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Added removing of stale /var/lib/sss/pubconf/kdcinfo.* and /var/lib/sss/pubconf/kpasswdinfo.* files generated by SSSD during IPA server upgrade.
Fixes: https://pagure.io/freeipa/issue/7578
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
pkispawn sometimes does not run its indextasks. This leads to slow
unindexed filters on attributes such as description, which is used
to log in with a certificate. Explicitly reindex attribute that
should have been reindexed by CA's indextasks.ldif.
See: https://pagure.io/dogtagpki/issue/3083
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
For smart card and certificate authentication, Apache's
mod_lookup_identity module must be able to acess SSSD IFP. The module
accesses IFP as Apache user, not as ipaapi user.
Apache is not allowed to use IFP by default. The update code uses the
service's ok-to-auth-as-delegate flag to detect smart card / cert auth.
See: https://pagure.io/freeipa/issue/7751
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
httpd-2.4+ has deprecated the Order, Allow and Deny directives. Use the Require directive instead.
Signed-off-by: Sudharsan Omprakash <sudharsan.omprakash@yahoo.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
For smart card authentication, ipaapi must be able to access to sss-ifp.
During installation and upgrade, the ipaapi user is now added to
[ifp]allowed_uids.
The commit also fixes two related issues:
* The server upgrade code now enables ifp service in sssd.conf. The
existing code modified sssd.conf but never wrote the changes to disk.
* sssd_enable_service() no longer fails after it has detected an
unrecognized service.
Fixes: https://pagure.io/freeipa/issue/7751
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Aiming to support pylint 2.0 some functions and methods must have their
return statements updated in order to fix two new violations:
- `useless-return` (R1711):
Useless return at end of function or method Emitted when a single
"return" or "return None" statement is found at the end of function
or method definition. This statement can safely be removed because
Python will implicitly return None
- `inconsistent-return-statements` (R1710):
Either all return statements in a function should return an
expression, or none of them should. According to PEP8, if any return
statement returns an expression, any return statements where no value
is returned should explicitly state this as return None, and an
explicit return statement should be present at the end of the
function (if reachable)
Issue: https://pagure.io/freeipa/issue/7614
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Tune 389-DS replication settings to improve performance and avoid
timeouts. During installation of a replica, the value of
nsDS5ReplicaBindDnGroupCheckInterval is reduced to 2 seconds. At the end
of the installation, the value is increased sensible production
settings. This avoids long delays during replication.
See: https://pagure.io/freeipa/issue/7617
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Increase the WSGI daemon worker process count from 2 processes to 5
processes. This allows IPA RPC to handle more parallel requests. The
additional processes increase memory consumption by approximante 250 MB
in total.
Since memory is scarce on 32bit platforms, only 64bit platforms are
bumped to 5 workers.
Fixes: https://pagure.io/freeipa/issue/7587
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Add absolute_import from __future__ so that pylint
does not fail and to achieve python3 behavior in
python2.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Commit afc0d4b62d added an upgrade
step that add an attribute to a replica config entry. The entry
only exists after a replica has been added, so upgrade was broken
for standalone server. Catch and suppress the NotFound error.
Related to: https://pagure.io/freeipa/issue/7488
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Remove NTP server role from config.py.
Remove uneccesary variables and replaced untrack_file with restore_file.
Update typo in manpages and messages printed while installing.
Resolves: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Removing ntpd configuration files and entry from LDAP.
Add parameter and rename method for restoring forced time
services. Addressing some requests for change too.
Remove unused path for chrony-helper.
Resolves: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Completely remove ipaserver/install/ntpinstance.py
This is no longer needed as chrony client configuration
is now handled in ipa-client-install.
Part of ipclient/install/client.py related to ntp configuration
has been refactored a bit to not lookup for srv records
and/or run chrony if not necessary.
Addresses: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Commit aee0d2180c adds an upgrade step
that adds system crypto policy include to named.conf. This step
omitted the named.conf existence check; upgrade fails when it does
not exist. Add the existence check.
Also update the test to add the IPA-related part of the named.conf
config, because the "existence check" actually does more than just
check that the file exists - it also check that it contains the IPA
bind-dyndb-ldap configuration section.
Part of: https://pagure.io/freeipa/issue/4853
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Use temporary empty DIR-based ccache collection to prevent upgrade
failures in case KCM: or KEYRING: ccache type is used by default in
krb5.conf and is not available. We don't need any user credentials
during upgrade procedure but kadmin.local would attempt to resolve
default ccache and if that's not available, kadmin.local will fail.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1558818
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
With e6c707b168 we changed httpd
configuration to use abstracted out variables in the template.
However, during upgrade we haven't resolved these variables so an
upgrade from pre-e6c707b168067ebb3705c21efc377acd29b23fff install will
fail.
Add all missing variables to the upgrade code.
Fixes https://pagure.io/freeipa/issue/7454
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
The fix_trust_flags upgrade procedure pertains to the old Apache
mod_nss setup. With the move to mod_ssl, it now raises an
exception, so remove it.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>