Previously, CSRs were handled as a Str parameter which brought
trouble to Python 3 because of its more strict type requirements.
We introduce a CertificateSigningRequest parameter which allows to
use python-cryptography x509.CertificateSigningRequest to represent
CSRs in the framework.
https://pagure.io/freeipa/issue/7131
Replace custom file_exists() and dir_exists() functions with proper
functions from Python's stdlib.
The change also gets rid of pylint's invalid bad-python3-import error,
https://github.com/PyCQA/pylint/issues/1565
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Initial replica creation can go with ignoring time skew checks.
We should, however, force time skew checks during normal operation.
Fixes https://pagure.io/freeipa/issue/7211
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When running on memory-constrained systems, the `ipa-server-install`
program often fails during the "Configuring certificate server
(pki-tomcatd)" stage in FreeIPA 4.5 and 4.6.
The memory-intensive dogtag service causes swapping on low-memory
systems right after start-up, and especially new certificate
operations requested via certmonger can exceed the dbus client default
25 second timeout.
This patch changes dbus client timeouts for some such operations to
120 seconds (from the default 25 seconds, IIRC).
See more discussion in FreeIPA PR #1078 [1] and FreeIPA container
issue #157 [2]. Upstream ticket at [3].
[1]: https://github.com/freeipa/freeipa/pull/1078
[2]: https://github.com/freeipa/freeipa-container/issues/157
[3]: https://pagure.io/freeipa/issue/7213
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
User would like to see CA installation command in KRA installation
warning message.
This makes warning message similar to other installer messages where it
does suggests a command to run.
https://pagure.io/freeipa/issue/6952
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Felipe Barreto <fbarreto@redhat.com>
Previously IPA would set the LimitNOFILE value to 8192 to increase
the number of concurrent clients. 389-ds-base does this by default
as of 1.3.7.0.
Remove the IPA-specific tuning and rely on the out-of-the-box
389-ds-base tuning.
Bump the required version of 389-ds-base to 1.3.7.0.
Any other tuning added by 389-ds-base will result in a
dirsrv.systemd.rpmsave file which admins will need to merge
in manually, like typical .rpmsave config changes.
https://pagure.io/freeipa/issue/6994
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
If LDAP or HTTP Server Cert are not issued by ipa ca, they are not tracked.
In this case, it is not necessary to add them to the tracking requests list.
https://pagure.io/freeipa/issue/7151
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-server-upgrade needs to configure certmonger with the right options
in order to track PKI, HTTP and LDAP certs (for instance the RA agent cert
location has changed from older releases).
The upgrade code looks for existing tracking requests with the expected
options by using criteria (location of the NSSDB, nickname, CA helper...)
If a tracking request is not found, it means that it is either using wrong
options or not configured. In this case, the upgrade stop tracking
all the certs, reconfigures the helpers, starts tracking the certs so that
the config is up-to-date.
The issue is that the criteria is using the keyword 'ca' instead of
'ca-name' and this leads to upgrade believing that the config needs to be
updated in all the cases.
https://pagure.io/freeipa/issue/7151
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The message about an error during replica setup was causing the
users to think the installation gone wrong even though this was
an expected behavior when ipa-replica-install was ran without
--no-pkinit flag and CA somehow is not reachable which defines
that there is something wrong in a topology but does not lead
to failure of the replica's installation. So now installation
will not print error messages to stdout but rather will give a
recomendation to user and write the old error message to log
as a warning so it still will be easy to find if needed.
https://pagure.io/freeipa/issue/7179
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
For an externally-signed CA, if an earlier run of ipa-cacert-manage
was interrupted, the CA name in the IPA CA tracking request may have
been left as "dogtag-ipa-ca-renew-agent-reuse" (it gets reverted to
"dogtag-ipa-ca-renew-agent" at the end of the CSR generation
procedure). `ipa-cacert-manage renew` currently only looks for a
tracking request with the "dogtag-ipa-ca-renew-agent" CA, so in this
scenario the program fails with message "CA certificate is not
tracked by certmonger".
To handle this scenario, if the IPA CA tracking request is not
found, try once again but with the "dogtag-ipa-ca-renew-agent-renew"
CA name.
Part of: https://pagure.io/freeipa/issue/6858
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Allow the MS/AD-CS target certificate template to be specified by
name or OID, via the new option --external-ca-profile.
Part of: https://pagure.io/freeipa/issue/6858
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Firefox extension which served for configuring Kerberos auth in Firefox
until version which banned self-signed extensions was removed in commit
6c53765ac1.
Given that configure.jar, even older Firefox config tool, was removed
sometime before that, there is no use for signtool tool. It is good
because it is removed from Fedora 27 anyway. So removing last unused
function which calls it.
The removal of FF extension was not exactly clean so removing also
browserconfig.html which only purpose was to use the extension. Therefore
also related JS files are removed. This removal requires unauthorized.html
to be updated so that it doesn't point to non-existing page. And given that
it now points only to single config page, we can change link in UI login page
to this page (ssbrowser.html). While at it, improving buttons in ssbrowser.html.
Btw, commit 6c53765ac1 removed also generation of
krb.js. It had one perk - with that info ssbrowser.html could display real
Kerberos domain instead of only 'example.com'. I don't have time to revert this
change so removing traces of krb.js as well.
https://pagure.io/freeipa/issue/7135
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
In cases when IPA is installed in two steps (external CA), it's
necessary to check (in the second step) if Dir. Server is
running before continue with the installation. If it's not,
start Directory Server.
https://pagure.io/freeipa/issue/6611
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
ipa-server-upgrade fails with Server-Cert not found, when trying to
track httpd/ldap server certificates. There are 2 issues in the upgrade:
- the certificates should be tracked only if they were issued by IPA CA
(it is possible to have CA configured but 3rd part certs)
- the certificate nickname can be different from Server-Cert
The fix provides methods to find the server crt nickname for http and ldap,
and a method to check if the server certs are issued by IPA and need to be
tracked by certmonger.
https://pagure.io/freeipa/issue/7141
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Refactor convertHashName() method to accept hash names prefixed with
HMAC- or any other prefix. Extending the method should be easier in
future.
Add tests proposed by Rob Crittenden to make sure we don't regress
with expected behavior of convertHashName().
Fixes https://pagure.io/freeipa/issue/7146
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When configuring a winsync replication agreement, the tool performs a search
on AD for defaultNamingContext. The entry contains the value as a bytes, it
needs to be decoded otherwise subsequent calls to
DN(WIN_USER_CONTAINER, self.ad_suffix) will fail.
https://pagure.io/freeipa/issue/7131
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ldif.LDIFRecordList handles all attribute names as utf-8 strings
and all attribute values as bytes. If we take the attribute value
and try to search for it in the entry (= dictionary), if it contains
the attribute name as a key (which is a string), their hashes match.
However, even if hashes match, Python needs to make sure those two
are the same in case of a hash collision, so it tries to compare them.
This causes BytesWarning exception when running in strict mode
because `bytes` and `str` instances cannot be compared. KeyError
would be thrown in a non-strict mode.
Also, when later passing the attr to replace_value(), we need for it
to be `str` otherwise the modifications handler fails because it
tries to sort the attributes it's modifying but that's a bit less
poetic issue than the first one.
https://pagure.io/freeipa/issue/7129
Reviewed-By: Michal Reznik <mreznik@redhat.com>
When promoting a client to a replica we have to change sssd.conf,
deleting _srv_ part from 'ipa_server' property and setting
'ipa_server_mode' to true.
Previously, the wrong domain could be updated since the ipa_domain
variable was not being used properly.
https://pagure.io/freeipa/issue/7127
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
For some unknown reason, when I wrote the ipa-otptoken-import script
I used bad input data which had the PBKDF2 parameters in the wrong
XML namespace. I have corrected this input data to match RFC 6030.
https://pagure.io/freeipa/issue/7035
Signed-off-by: Nathaniel McCallum <npmccallum@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
After commit cac3475, ipa-backup is broken due to circular
dependencies. This fixes it, removing circular dependency
of ipalib. The ipalib.constants.IPAAPI_USER is now passed
as parameter to the function that use it.
https://pagure.io/freeipa/issue/7108
Reviewed-By: Tomas Krizek <tkrizek@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Since ipaapi user is now created during RPM install and not in runtime,
we may switch back to shipping tmpfiles.d configuration directly in RPMs
and not create it in runtime, which is a preferred way to handle drop-in
configuration anyway.
This also means that the drop-in config will be shipped in /usr/lib
instead of /etc according to Fedora packaging guidelines.
This partially reverts commit 38c66896de.
https://pagure.io/freeipa/issue/7053
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Fix certificate renewal scripts that use IPACertificate object:
- renew_ca_cert adds the C flag to the trust flags and needs to
be adapted to IPACertificate object
- ipa-cacert-manage: fix python3 encoding issue
https://pagure.io/freeipa/issue/7106
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
ipa-server-upgrade fails when running the ipaload_cacrt plugin. The plugin
finds all CA certificates in /etc/httpd/alias and uploads them in LDAP
below cn=certificates,cn=ipa,cn=etc,$BASEDN.
The issue happens because there is already an entry in LDAP for IPA CA, but
with a different DN. The nickname in /etc/httpd/alias can differ from
$DOMAIN IPA CA.
To avoid the issue:
1/ during upgrade, run a new plugin that removes duplicates and restarts ldap
(to make sure that uniqueness attr plugin is working after the new plugin)
2/ modify upload_cacert plugin so that it is using $DOMAIN IPA CA instead of
cn=$nickname,cn=ipa,cn=etc,$BASEDN when uploading IPA CA.
https://pagure.io/freeipa/issue/7125
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Recent certificate refactoring left the system in a state where
the certificates are somewhere converted to DER format, somewhere
directly sent to ipaldap as IPACertificate objects. The latter
is the desirable way, make sure it's the one commonly used.
https://pagure.io/freeipa/issue/4985
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Since IPACertificate object is passed to CAInstance's
update_people_entry() and update_authority_entry(),
these are not be able to load this object as a certificate again and
thus would fail. This commit fixes that.
https://pagure.io/freeipa/issue/4985
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The CSR generated by `ipa-cacert-manage renew --external-ca` did
not include the CA basic constraint:
X509v3 Basic Constraints: critical
CA:TRUE
Add a flag to certmonger::resubmit_request to specify that a
CA is being requested.
Note that this also sets pathlen to -1 which means an unlimited
pathlen. Leave it up to the issuing CA to set this.
https://pagure.io/freeipa/issue/7088
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This commit fixes requesting certificates via certmonger in Python 3.
This includes dogtag-ipa-ca-renew-agent-submit script and scripts
used during the scripts restarting.
https://pagure.io/freeipa/issue/4985
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
In Fedora 27 curl is proposing to switch to using OpenSSL as
the crypto backend instead of NSS. This requires a new set of
arguments to certmonger to bootstrap fetching the IPA RA cert.
https://pagure.io/freeipa/issue/7076
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
The latest version of caIPAserviceCert profile includes a feature
that is not available before Dogtag 10.4, and this version of the
profile is intended for new installs only (otherwise, problems will
arise in topologies containing CA replicas at an earlier version).
But IPA versions before v4.2 did not use LDAP-based profiles, so the
new version of the profile gets imported when upgrading from
pre-v4.2 to v4.5 or later.
We do not yet have a proper version- and topology-aware profile
update mechanism, so to resolve this issue, ship the older version
of the profile alongside the newer version, and make sure we use the
older version when importing the profile in an upgrade context.
https://pagure.io/freeipa/issue/7097
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Up until now, Bytes parameter was used for certificate parameters
throughout the framework. However, the Bytes parameter does nothing
special for certificates, like validation, so this had to be done
for each of the parameters which were supposed to represent a
certificate.
This commit introduces a special Certificate parameter which takes
care of certificate validation so this does not have to be done
separately. It also makes sure that the certificates represented by
this parameter are always converted to DER format so that we can work
with them in a unified manner throughout the framework.
This commit also makes it possible to pass bytes directly during
instantiation of the Certificate parameter and they are still
represented correctly after their conversion in the _convert_scalar()
method.
https://pagure.io/freeipa/issue/4985
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
load_unknown_x509_certificate() serves for the cases where we
can't be sure what the format of its input certificate is. This
is the case for installers, it should not be used anywhere else.
https://pagure.io/freeipa/issue/4985
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Splitting the load_certificate() function into two separate helps
us word the requirements for the input explicitly. It also makes
our backend similar to the one of python-cryptography so eventually
we can swap python-cryptography for IPA x509 module.
https://pagure.io/freeipa/issue/4985
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Stanislav Laznicka
Christian Heimes
Alexander Bokovoy
John Morris
Alexander Koksharov
Rob Crittenden
Florence Blanc-Renaud
Aleksei Slaikovskii
Fraser Tweedale
Petr Vobornik
Felipe Barreto
Nathaniel McCallum
Martin Babinsky
Lewis Eason
David Kupka