Pass along the user-provided password file, if any, to the
underlying NSS database. This will provide for per-token
passwords.
If a token is in a nickname then break it out and pass it to
certutil separately.
Fixes: https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Some certificate operations need to be executed as a specific
user so that underlying files will have the correct ownership.
certmogner normally runs as root. The nss-user option defines
a user to switch to when saving NSS certifciates so if a
software token (e.g. SoftHSM) then the files created will be
owned by the token owner.
Fixes: https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
ca.certStatusUpdateInterval manages how frequently to update
the certificate status in LDAP (expired, etc).
By default this is not set on the initial master and pkispawn sets
it to 0 on replicas. This can lead to no server running this
task and therefore the status attribute not reflecting the current
state.
On enabling CRL generation remove any value which will cause PKI
to use its default. On disabling set it to 0.
Only one server should run the update status task to prevent
unnecessary replication.
Fixes: https://pagure.io/freeipa/issue/9569
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
A previous change made it not possible to remove the admin
user. This also included disabling the admin user. The user can
be disabled, just not deleted because it is required.
Move the test test_ipa_cacert_manage_prune to the end of the
class because it changes time which can break replication.
Fixes: https://pagure.io/freeipa/issue/9489
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The current filter in principal_has_privilege is only working for normal
IPA users where krbprincipalname is matching the principal. An idoverride
user (for example from AD) is not found with this filter.
A new filter for the principal as an ipaOriginalUid has been added as a
second try if a match with krbprincipalname was not found.
principal_has_privilege is used in the replica connection check. The
additional check enables to deploy replicas using an AD user/administrator
that has been added to the "admins" group.
Fixes: https://pagure.io/freeipa/issue/9542
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The ipa tool has nearly since epoch returned 2 for the case of
entry not found.
The certificate processing raises a separate error,
CertificateOperationsError, when something goes wrong.
This returns 1.
With the introduction of the JSON API most requests will get
a proper HTTP return code representing what went wrong. In this
case we can use 404 to determine if the request resulted in
a NotFound therefore can eventually return a 2 and be
consistent in return values.
Related: https://pagure.io/freeipa/issue/9562
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
- kinit helpers are now in `ipalib.kinit`.
- helpers can now use default ccache locations like many other similar
helpers
- helpers return the result from `run` for debugging
- constants are now in `krb_utils`
- helpers pass `KRB5*` and `GSS*` env vars along, so `KRB5_TRACE` works
- document how to kinit for `ipalib.api`
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
SIDGEN plugin only uses local ID ranges and thus a restart is really
needed only when a local range is added, modified or removed.
Also fix the SSSD warning because removal of any range requires restart
everywhere, not just on a specific server.
Fixes: https://pagure.io/freeipa/issue/9558
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
After the addition of a new idrange, the sidgen plugin is not
immediately aware of the new idrange and a restart of 389ds is
required. Otherwise the creation of new user/group with a uid/gid
inside the new range fails to grant a SID to the user/group.
Fixes: https://pagure.io/freeipa/issue/9558
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When get_realmdomains() method is called, it will filter out subdomains
of the IPA primary domain. This is required because Active Directory
domain controllers are assuming subdomains already covered by the main
domain namespace.
[MS-LSAD] 3.1.4.7.16.1, 'Forest Trust Collision Generation' defines the
method of validating the forest trust information. They are the same as
rules in [MS-ADTS] section 6.1.6. Specifically,
- A top-level name must not be superior to an enabled top-level name
for another trusted domain object, unless the current trusted domain
object has a corresponding exclusion record.
In practice, we filtered those subdomains already but the code wasn't
invalidating a previously retrieved forest trust information.
Fixes: https://pagure.io/freeipa/issue/9551
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
When authentication indicators were introduced in 2016, ipa-pwd-extop
plugin gained ability to reject LDAP BIND when an LDAP client insists
the authentication must use an OTP token. This is used by ipa-otpd to
ensure Kerberos authentication using OTP method is done with at least
two factors (the token and the password).
This enfrocement is only possible when an LDAP client sends the LDAP
control. There are cases when LDAP clients cannot be configured to send
a custom LDAP control during BIND operation. For these clients an LDAP
BIND against an account that only has password and no valid token would
succeed even if admins intend it to fail.
Ability to do LDAP BIND without a token was added to allow users to add
their own OTP tokens securely. If administrators require full
enforcement over LDAP BIND, it is cannot be achieved with LDAP without
sending the LDAP control to do so.
Add IPA configuration string, EnforceLDAPOTP, to allow administrators to
prevent LDAP BIND with a password only if user is required to have OTP
tokens. With this configuration enabled, it will be not possible for
users to add OTP token if one is missing, thus ensuring no user can
authenticate without OTP and admins will have to add initial OTP tokens
to users explicitly.
Fixes: https://pagure.io/freeipa/issue/5169
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
ipa-restore is relying on the presence of specific directories,
e.g. /var/lib/dirsrv/slapd-/db/ipaca, to detect
which backends are in use (userRoot or ipaca).
With the switch to LMDB, these directories do not exist and the
restore fails finding the ipaca backend.
Use lib389.cli_ctl.dblib.run_dbscan utility instead to
check which backends are present.
This method was been introduced in 389ds 2.1.0 and works with
Berkeley DB and LMDB.
Add a --data option to the ipa-backup and ipa-restore tasks to do
only an LDIF backup and restore. Also add the ability to restore by
backend.
Add new tests to do a data-only backup and restore.
Fixes: https://pagure.io/freeipa/issue/9526
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Do minimal validation of the Kerberos principal name when passing it to
kinit command line tool. Also pass it as the final argument to prevent
option injection.
Accepted Kerberos principals are:
- user names, using the following regexp
(username with optional @realm, no spaces or slashes in the name):
"(?!^[0-9]+$)^[a-zA-Z0-9_.][a-zA-Z0-9_.-]*[a-zA-Z0-9_.$-]?@?[a-zA-Z0-9.-]*$"
- service names (with slash in the name but no spaces). Validation of
the hostname is done. There is no validation of the service name.
The regular expression above also covers cases where a principal name
starts with '-'. This prevents option injection as well.
This fixes CVE-2024-1481
Fixes: https://pagure.io/freeipa/issue/9541
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
ipa-backup is relying on the presence of the directory
/var/lib/dirsrv/slapd-<INSTANCE>/db/ipaca/
to detect if the CA is installed on the server and backup
the ipaca backend.
With the switch to LMDB, this directory does not exist and the
backup is missing ipaca information.
Use lib389.cli_ctl.dblib.run_dbscan utility instead to
check if ipaca backend is present (this method has been
introduced in 389ds 2.1.0 and works with Berkeley DB and LMDB).
Fixes: https://pagure.io/freeipa/issue/9516
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Thierry Bordaz <tbordaz@redhat.com>
Vault uses PKCS1v15 as default padding wrapping algo, which is not an approved
FIPS algorithm. This commit ensures that KRA is installed with RSA-OAEP if FIPS
is enabled. It also handles upgrade path.
Fixes: https://pagure.io/freeipa/issue/9191
Signed-off-by: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
If a vault operation fails, the error message just says "InternalError". This commit
improves error handling of key archival and retrieval calls by catching the PKIException
error and raising it as an IPA error.
Related: https://pagure.io/freeipa/issue/9191
Signed-off-by: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Cryptography 42.0.0 introduced two new abstract properties
`not_valid_before_utc` and `not_valid_after_utc`, which are non-naive UTC
variants of the `not_valid_before` and `not_valid_after` properties.
The old properties are deprecated. The changeset also modifies code and
tests to use the new `_utc` variants.
Fixes: https://pagure.io/freeipa/issue/9518
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
This should not have been gated on options.setup_ca because we need
the RA agent on all servers if there is a CA in the topology otherwise
the non-CA servers won't be able to communicate with the CA.
Fixes: https://pagure.io/freeipa/issue/9510
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
ca_enable and kra_enabled are intended to be used to identify that
a CA or KRA is available in the topology. It was also being used
to determine whether a CA or KRA service is desired on a replica
install, rather than options.setup_[ca|kra]
Fixes: https://pagure.io/freeipa/issue/9510
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Some tools may pass None as NetBIOS name if not put explicitly by a
user. This meant to use default NetBIOS name generator based on the
domain (realm) name. However, this wasn't done properly, so None is
passed later to python-ldap and it rejects such LDAP entry.
Fixes: https://pagure.io/freeipa/issue/9514
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Since commit 5c0e7a5fb4, a new extended
operation to get a keytab is supposed to be used. This keytab
setting/retrieval extended operation checks access rights of the bound
DN to write to a virtual attribute 'ipaProtectedOperation;write_keys'.
If the write isn't allowed, the operation is rejected and ipa-getkeytab
tool falls back to an older code that generates the keytab on the client
and forcibly sets to the LDAP entry. For the latter, a check is done to
make sure the bound DN is allowed to write to 'krbPrincipalKey' attribute.
This fallback should never happen for newer deployments. When enrollemnt
operation is delegated to non-administrative user with the help of 'Host
Enrollment' role, a host can be pre-created or created at enrollment
time, if this non-administrative user has 'Host Administrators' role. In
the latter case a system permission 'System: Manage Host Keytab' grants
write access to 'krbPrincipalKey' attribute but lacks any access to the
virtual attributes expected by the new extended operation.
There is a second virtual attribute, 'ipaProtectedOperation;read_keys',
that allows to retrieve existing keys for a host. However, during
initial enrollment we do not allow to retrieve and reuse existing
Kerberos key: while 'ipa-getkeytab -r' would give ability to retrieve
the existing key, 'ipa-join' has no way to trigger that operation.
Hence, permission 'System: Manage Host Keytab' will not grant the right
to read the Kerberos key via extended operation used by 'ipa-getkeytab
-r'. Such operation can be done later by utilizing 'ipa
service/host-allow-retrieve-keytab' commands.
Fix 'System: Manage Host Keytab' permission and extend a permission test
to see that we do not fallback to the old extended operation.
Fixes: https://pagure.io/freeipa/issue/9496
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
We want to avoid splitting a replica server installation between
two hosts where possible so if a CA or KRA is requested then
we only try to install against a remote server that also provides
those capabilities. This avoids race conditions.
If a CA or KRA is not requested and the user has provided a
server to install against then use that instead of overriding it.
Extend the logic of picking the remote Custodia mode
(KRA, CA, *MASTER*) to include considering whether the
CA and KRA services are requested. If the service(s) are
not requested the the associated hostname may not be
reliable.
Fixes: https://pagure.io/freeipa/issue/9491
Related: https://pagure.io/freeipa/issue/9289
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Up to PKI 11.5.0 even when a pki-server call failed it had a
return value of 0. This was fixed in 11.5.0 which breaks
ipa-acme-manage pruning. If a configuration value is not set
then the call fails and the tool gives up with an error like:
ERROR: No such parameter: jobsScheduler.job.pruning.certRetentionUnit
In previous versions this resulted in an empty string so the tool
displayed the default value.
So now upon failure look in the stderr output for "No such parameter"
and return an empty string so the behavior is consistent between
both old and new PKI server versions.
Fixes: https://pagure.io/freeipa/issue/9503
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The referer was only checked in WSGIExecutioner classes:
- jsonserver
- KerberosWSGIExecutioner
- xmlserver
- jsonserver_kerb
This left /i18n_messages, /session/login_kerberos,
/session/login_x509, /session/login_password,
/session/change_password and /session/sync_token unprotected
against CSRF attacks.
CVE-2023-5455
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Fix the following errors:
I0021(useless-suppression)
R1710(inconsistent-return-statements)
E1101(no-member)
Ignore the following errors:
E0601(used-before-assignment)
The variable is imported when the code is run in_server.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
hbactest does a number of internal searches, one of which
can exceed the configured sizelimit: hbacrule-find
Collect any messages returned from thsi call and display them
to the user on the cli.
Fixes: https://pagure.io/freeipa/issue/9486
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The command ipa group-add-member --external aduser@addomain.test
fails with an internal error when used with samba 4.19.
The command internally calls samba.security.dom_sid(sid) which
used to raise a TypeError but now raises a ValueError
(commit 9abdd67 on https://github.com/samba-team/samba).
IPA source code needs to handle properly both exception types.
Fixes: https://pagure.io/freeipa/issue/9466
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The subsystem.select is not a reliable indicator to determine
whether the CA is a renewal master since there is no process in
PKI to update the param when the role of the instance changes
(from master to clone and vice versa) so the param has been
removed in PKI 11.5.
Instead, it's better to use CAInstance.is_crlgen_enabled() since
CRL generation is only enabled in a renewal master.
Signed-off-by: Endi Sukma Dewata <edewata@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Currently LWCA is only supported in IPA since the key
replication depends on Custodia, so LWCA is not actually
supported in regular PKI installation. However, currently
the AuthorityMonitor is enabled by default and it executes
a persistent search to monitor LWCA replication so it is
wasting resources in non-IPA environment.
To reduce unnecessary resource consumption the LWCA monitor
will be disabled by default in PKI, so IPA will need to
enable it explicitly for new and existing installations.
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
This is a side-effect of adding the libpwquality options. It
imposes its own hardcoded minimum password length so some care
was needed to ensure that it isn't set too low.
So if there are no libpwquality options used then it's fine to
have no minlength in the policy.
Fixes: https://pagure.io/freeipa/issue/9297
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The replica install was unilaterally removing KRB5CCNAME from
os.environ in some cases. Instead check first to see if it is
present and only remove in that case.
Fixes: https://pagure.io/freeipa/issue/9446
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
389DS supports BDB and LMDB backends. FreeIPA installation fails with
LMDB backend since it tries to apply tuning for BDB backend.
Instead, tuning for BDB should be applied only when 389DS uses BDB
backend.
Fixes: https://pagure.io/freeipa/issue/9435
Signed-off-by: Viktor Ashirov <vashirov@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Write a new krb5.conf in case any values changed finding the
right server to configure against (e.g. for CA, KRA) and
ensure the API connection is to the remote server that
will be installed against.
When finding a CA or KRA during initial replica installation
set the remote master as well. The order is:
- existing server value in /etc/ipa/default.conf
- the chosen CA host if the server doesn't provide one
- the chosen KRA host if the server doesn't provide one
This is more or less heirarchical. If a server is provided
then that is considered first. If it provides all the
optional services needed (CA and/or KRA) then it will
be used. Otherwise it will fall back to a server that provides
all the required services.
In short, providing --server either at client install or
with ipa-replica-install is no guarantee that it will
define all topology. This may be unexpected behavior.
For the case of adding a CA or KRA things are effectively
unchanged. This type of install does not appear to be
impacted by affinity issues.
Fixes: https://pagure.io/freeipa/issue/9289
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Clean up and remove obsolete code from ipa-replica-install. For several
versions replica installer first ensures that a host is an IPA client,
then promotes the client to a replica. The client installer code sets up
CA stores like IPA_CA_CRT already.
Related: https://pagure.io/freeipa/issue/9272
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
The ipaidpuser objectclass is required for the attribute ipaidpsub.
When a user is created or modified with --idp-user-id, the operation
must ensure that the objectclass is added if missing.
Add a test for user creation and user modification with --idp-user-id.
Fixes: https://pagure.io/freeipa/issue/9433
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The XML API is already deprecated and will be removed in some
future release.
All but the updateCRL API has an equivalent in REST. The upstream
dogtag project documents most of the API at
https://github.com/dogtagpki/pki/wiki/REST-API . I say most
because not every API includes sample input/output. The
pki ca-cert command is a good substitute for seeing how the API
is used by their own tooling.
This changes no pre-existing conventions. All serial numbers are
converted to decimal prior to transmission and are treated as
strings to avoid previous limitations with sizing (which would
have been exacerbated by random serial numbers).
Fixes: https://pagure.io/freeipa/issue/9345
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>