Test 'test_hsm_negative_bad_token_dir_permissions'
was failing in RHEL because of the below error.
"ipa: ERROR: stderr: usermod: invalid option -- 'r'"
Hence replaced the usermod with gpasswd command which does the same and
works on both RHEL and Fedora.
Ref: https://pagure.io/freeipa/issue/9626
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
TripleDES will be deprecated in python-cryptography 48.0.0. We
have code that uses it if it is available and otherwise ignores
it.
Because this gets imports in constants.py this warning is promiment
pretty much everywhere. So let's ignore it since we already handle
the issue.
Related: https://pagure.io/freeipa/issue/9641
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
public_key_algorithm_oid is property of underlying Certificate object
that is not supposed to be callable. I missed that it contained
() at the end.
Fixes: https://pagure.io/freeipa/issue/9641
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When ipa trust-add fails to retrieve the remote domain information,
it exits with "an internal error has occurred".
Handle the case with a better error message.
Fixes: https://pagure.io/freeipa/issue/9488
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
During the server installation, the installer checks if the
SElinux policy module for the specific hardware is detected. The
current code mixed up SElinux policy module name and RPM
package name and resulted in a false warning that the module
was missing.
The module name is ipa-nfast or ipa-luna, not ipa-selinux-nfast
or ipa-selinux-luna.
The name is defined in the spec file as %{module}-nfast
and module=ipa.
Fixes: https://pagure.io/freeipa/issue/9636
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The test TestHSMNegative should be skipped if PKI is too old,
but its uninstall method does not check the PKI version.
Add a call to check_version in the class uninstall method.
Fixes: https://pagure.io/freeipa/issue/9648
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
The test is often failing on timeout. Add 15min to the test definitions.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
It previously only printed the issue which made troubleshooting
after the fact difficult. Using logger.error() provides the same
visual functionality but also logs to the server install log.
Fixes: https://pagure.io/freeipa/issue/9637
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Remove the client side cookie if a user possesses an IPA session
cookie and the associated credentials can't be found on the
server.
This handles the case where the ccaches are removed for some reason
(maybe cleanup, maybe a container was restarted) and allows for
a successful SSO if the user's Kerberos ticket is still valid.
Without this change the user is always dropped into a the
username/password dialog. The only workaround is to remove
the cookie on the client side.
Fixes: https://pagure.io/freeipa/issue/9624
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
During a replica CA installation, the initial replication step may fail
if there is too much time skew between the server and replica.
The replica installer already takes care of this for the replication of
the domain suffix but the replica CA installer does not set
nssldapd-ignore-time-skew to on for o=ipaca suffix.
During a replica CA installation, read the initial value of
nssldapd-ignore-time-skew, force it to on, start replication and
revert to the initial value.
Apply the same logic to dsinstance and ipa-replica-manage force-sync.
Fixes: https://pagure.io/freeipa/issue/9635
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Cryptography 43 started to warn that in version 48 it will remove
TripleDES support. Change the code to detect missing TripleDES algorithm
and do not fail.
Related: https://pagure.io/freeipa/issue/9641
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Pylint started to complain that 'unicode' variable is accessed before
definition. This is clearly a bug in how 'six' and pylint are working
together.
Replace use of 'unicode()' by 'str()'.
Fixes: https://pagure.io/freeipa/issue/9644
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Run all commands as pkiuser when validating that the HSM token
is available, that the token library path is correct and that
the password can read keys. This will avoid issues where the
initial validation is ok but the pkiuser is not granted read
access to some part of the token. This is very possible
when using softhsm2.
Fixes: https://pagure.io/freeipa/issue/9626
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
There were a few hardcoded places where it was set to
/tmp/token_passwd instead of using the class variable.
Don't rely on previous running tests installing the token
password file so they can be run individually.
Fixes: https://pagure.io/freeipa/issue/9603
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Nodejs22 has been released on f39 and f40 and freeipa fails
to build with this version. Nodejs22 will be the default version
in f41+ and adds a symlink from /usr/bin/node-22 to /usr/bin/node
but on older fedora versions, the symlink is not created.
As our build is using /usr/bin/node command, it fails with
command not found.
Stick to Nodejs 20 on these older versions.
Fixes: https://pagure.io/freeipa/issue/9643
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The test test_ipa_ipa_migration.py::TestIPAMigrateScenario1
::test_ipa_migrate_stage_mode is now passing, the issue has been fixed.
Related: https://pagure.io/freeipa/issue/9621
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Sudhir Menon <sumenon@redhat.com>
The test test_ipa_ipa_migration.py::TestIPAMigrateScenario1::
test_ipa_migrate_version_option is now passing, issue has been fixed.
The -V option has been removed.
Related: https://pagure.io/freeipa/issue/9620
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Sudhir Menon <sumenon@redhat.com>
For users who has no OTP tokens defined (yet), a missing token should
not be seen as a failure. This is needed to allow a basic password
change.
The logic around enforcement of OTP over LDAP bind is the following:
----------------------------------------------------------------------
- when LDAP OTP control is requested by the LDAP client, OTP is
explicitly required
- when EnforceLDAPOTP is set in the IPA configuration, OTP is implicitly
required, regardless of the state of LDAP client
In either case, only users with 'user-auth-type: otp' are allowed to
authenticate.
If these users have no OTP token associated yet, they will be allowed to
authenticate with their password. This is to allow initial password
change and adding an OTP token.
----------------------------------------------------------------------
Implement test that simulates lifecycle for new user who get to change
their password before adding an OTP token.
Related: https://pagure.io/freeipa/issue/5169
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
We were previousily taking the provided ca cert and creating a temporary
file from it. This was incorrect and caused the secure connection to
fail. Instead just use the file path provided.
Fixes: https://pagure.io/freeipa/issue/9619
Signed-off-by: Mark Reynolds <mreynolds@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
hsm_validator() was more or less bolted in place late in the
development cycle in in order to catch some of the more common
problems: bad token name, bad password, etc.
There was a fair bit of duplication and had the side-effect of not
reading in the token password from the --token-password-file option
in some cases.
This patch also re-adds a lost feature where an exception is raised if
both the --token-password and --token-password-file options are passed
in.
This also needs to be enforced on initial server, replica and when
called by ipa-kra-install. Given that each has a unique subject of
options some duplication remains.
Fixes: https://pagure.io/freeipa/issue/9603
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
It was missing a trailing fi.
This bad syntax was preventing cleanup of the
{free}ipa-selinux-luna SELinux module:
Running scriptlet: freeipa-selinux-luna-4.12.0.dev202402211727+git0ee 34/44
/var/tmp/rpm-tmp.qoCDFi: line 16: syntax error: unexpected end of file
warning: %postun(freeipa-selinux-luna-4.12.0.dev202402211727+git0eeecdcec-0.fc37.noarch) scriptlet failed, exit status
Fixes: https://pagure.io/freeipa/issue/9629
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
find_sid_for_ldap_entry could fail in several ways if a Posix ID can not
be converted to an unused SID. This could happen for example for ducplicate
IDs or user/group out of range.
This change enables ipa_sidgen_task to continue in the error case to try
to convert the entries without errors. The error messages have been
extended to additionally show the DN string for the bad entries.
Fixes: https://pagure.io/freeipa/issue/9618
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The service is socket-activated and will be restarted whenever
needed. It must be stopped before the database is removed
otherwise it fails to recreate the file.
Fixes: https://pagure.io/freeipa/issue/9616
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-ods-enforcer is a socket-activated service. In order to fully stop
the service, IPA needs to call
systemctl stop ipa-ods-enforcer.service ipa-ods-enforcer.socket
otherwise the socket remains active (listening) and can restart the
service.
A consequence of the issue is the backup / uninstall / restore
scenario that is failing to sign the zones. The uninstaller removes
the socket /run/opendnssec/engine.sock but leaves the ipa-ods-enforcer.socket
active. A subsequent restore or install will not re-create the socket.
Fixes: https://pagure.io/freeipa/issue/9613
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Ideally all files created during an IPA server installation are
removed by the uninstaller. Some files are purposefully left,
like token passwords, private keys, logs and more. Add an
allow list for those files.
Include a test to catch any additional files that may be created
and left behind.
Fixes: https://pagure.io/freeipa/issue/8080
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
With PKI 11.5.0, the test
test_cert.py::TestCAShowErrorHandling::test_ca_show_error_handling
is failing with an exception and a different error message.
Mark as xfail until PKI provides a fix
Related: https://pagure.io/freeipa/issue/9606
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Update the pipelines for ipa-4-12 branch:
- run tests on fedora 40
- use the vagrant image freeipa/ci-ipa-4-12-f40
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
The renewal of PKINIT cert on hidden replica is failing because
of a test ensuring that the KDC service is either enabled or
configured. The test needs to be extended and allow hidden, too.
Fixes: https://pagure.io/freeipa/issue/9611
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Test scenario:
- ensure there is no /etc/ssh/ssh_config.orig file
- force ipa-client package reinstallation
- ensure no backup file is created in /etc/ssh/ssh_config.orig
Related: https://pagure.io/freeipa/issue/9610
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
The upgrade removes the line
HostKeyAlgorithms ssh-rsa,ssh-dss
if present in /etc/ssh/ssh_config and creates a backup in
/etc/ssh/ssh_config.orig, even if no change was applied.
Create the backup file only if the file was changed.
Fixes: https://pagure.io/freeipa/issue/9610
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
ipa-otptoken-import provides an option (-k KEYFILE) to import
an encrypted PSKC file but this option does not work with python3
in RHEL8 and above, because the key should be passed in binary
format to the cryptography functions instead of string format.
Open the keyfile in binary mode to pass the expected format.
Fixes: https://pagure.io/freeipa/issue/9609
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The domain and ca objects were unreadable which caused
the conneciton lines between nodes in the UI to not be
visible.
Also add a manual ACI to allow reading the min/max
domain level.
Fixes: https://pagure.io/freeipa/issue/9594
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
The name used to be "export_%Y_%m_%d_%H_%M_%S" so if the tasks
were added within the same second the second backend would fail.
Add the backend name to the task name to ensure uniqueness.
export_{backend}_%Y_%m_%d_%H_%M_%S
Fixes: https://pagure.io/freeipa/issue/9584
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mark Reynolds <mreynolds@redhat.com>
The initial design for ticket flags was implementing this logic:
* If a ticket policy is defined for the principal entry, use flags from
this policy if they are set. Otherwise, use default ticket flags.
* If no ticket policy is defined for the principal entry, but there is a
global one, use flags from the global ticket policy if they are set.
Otherwise, use default ticket flags.
* If no policy (principal nor global) is defined, use default ticket
flags.
However, this logic was broken by a1165ffb which introduced creation of
a principal-level ticket policy in case the ticket flag set is modified.
This was typically the case for the -allow_tix flag, which was set
virtually by the KDB driver when a user was locked until they initialize
their password on first kinit pre-authentication.
This was causing multiple issues, which are mitigated by the new
approach:
Now flags from each level are combined together. There flags like
+requires_preauth which are set systematically by the KDB diver, as
well as -allow_tix which is set based on the value of "nsAccountLock".
This commit also adds the implicit -allow_svr ticket flag for user
principals to protect users against Kerberoast-type attacks. None of
these flags are stored in the LDAP database, they are hard-coded in the
KDB driver.
In addition to these "virtual" ticket flags, flags from both global and
principal ticket policies are applied (if these policies exist).
Principal ticket policies are not supported for hosts and services, but
this is only an HTTP API limitation. The "krbTicketPolicyAux" object
class is supported for all account types. This is required for ticket
flags like +ok_to_auth_as_delegate. Such flags can be set using "ipa
host-mod" and "ipa serivce-mod", or using kadmin's "modprinc".
It is possible to ignore flags from the global ticket policy or default
flags like -allow_svr for a user principal by setting the
"final_user_tkt_flags" string attribute to "true" in kadmin. In this
case, any ticket flag can be configured in the principal ticket policy,
except requires_preauth and allow_tix.
When in IPA setup mode (using the "ipa-setup-override-restrictions" KDB
argument), all the system described above is disabled and ticket flags
are written in the principal ticket policy as they are provided. This is
required to initialize the Kerberos LDAP container during IPA server
installation.
This fixes CVE-2024-3183
Signed-off-by: Julien Rische <jrische@redhat.com>
The initial implementation of MS-SFU by MIT Kerberos was missing a
condition for granting the "forwardable" flag on S4U2Self tickets.
Fixing this mistake required adding special case for the
check_allowed_to_delegate() function: if the target service argument is
NULL, then it means the KDC is probing for general constrained
delegation rules, not actually checking a specific S4U2Proxy request.
In commit e86807b5, the behavior of ipadb_match_acl() was modified to
match the changes from upstream MIT Kerberos a441fbe3. However, a
mistake resulted in this mechanism to apply in cases where target
service argument is set AND unset. This results in S4U2Proxy requests to
be accepted regardless of the fact there is a matching service
delegation rule or not.
This vulnerability does not affect services having RBCD (resource-based
constrained delegation) rules.
This fixes CVE-2024-2698
Signed-off-by: Julien Rische <jrische@redhat.com>
The behavior of ipa-replica-manage list-ruv was modified with
the commit 544652a and now displays host short names instead
of FQDN:port.
Fix the regular expression in order to return the FQDN:port again.
Fixes: https://pagure.io/freeipa/issue/9598
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
By default, interactive console prints full traceback in case of an
error. This looks weird in the console when LDAP errors pop up.
Instead, process PublicError exceptions as if they are final ones and
only print their message.
As a result, calls like api.Command.user_show('unknown') would
result in a concise message:
>>> api.Command.user_show('unknown')
IPA public error exception: NotFound: unknown: user not found
>>>
rather than a two-screen long traceback.
Fixes: https://pagure.io/freeipa/issue/9590
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
jwcrypto has turned JWK object into a dict-like structure in 2020 and
marked data wrappers as deprecated. The only exception for direct
foo['bar'] access is a key ID -- some keys might have no 'kid' property,
thus it is best to use jwk.get('kid') instead for those.
Fixes: https://pagure.io/freeipa/issue/9597
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
For each executed command in server context, send the information about
the command to the systemd journal. The resulting string is similar to
what is recored in httpd's error_log for API requests coming through the
RPC layer.
In server mode operations are performed directly on the server over
LDAPI unix domain socket, so httpd end-point is not used and therefore
operations aren't recorded in the error_log.
With this change any IPA API operation is sent as an audit event to the
journal, alog with additional information collected by the journald
itself.
To aid with identification of these messages, an application name is
replaced with IPA.API and the actual name from api.env.script is made a
part of the logged message. The actual application script name is
available as part of the journal metadata anyway.
If no Kerberos authentication was used but rather LDAPI autobind was in
use, the name of the authenticated principal will be replaced with
[autobind].
Messages sent with syslog NOTICE priority.
More information is available in the design document 'audit-ipa-api.md'
Fixes: https://pagure.io/freeipa/issue/9589
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Context changes cause linters to complain for older code formatting
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
To prevent cyclic imports, move JSON handling code to a separate file.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
batch(methods=Dict(), keeponly=list) will allow to execute batch of
commands and remove from the output everything but the attributes which
names were passed in the keeponly list.
This can be useful if you are only interested in getting names and
assigned random passwords, for example.
Fix batch API test in test_integration/test_idm_api.py and use it to
validate keeponly option.
Fixes: https://pagure.io/freeipa/issue/9583
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
Follow pylint recommendations (turned errors in recent pylint updates)
and use PEP-380 syntax for subgenerators. This is supported by all
Python 3 versions since ~2011.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
In LDAP auto-bind situation we will not have a Kerberos principal
available, so we should be using a different mechanism to find the
object. Since we already have a valid bound LDAP DN, use it as a base DN
here and simply require presence of the POSIX account.
This will not match 'cn=Directory Manager' but none of the code we have
uses LDAP auto-bind as root when calling 'ipa user-find --whoami'.
Fixes: https://pagure.io/freeipa/issue/9583
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
In server-like context we use LDAPI connection with auto-binding to LDAP
object based on the UID of the process connecting to LDAPI UNIX domain
socket. This means context.principal is not set and we cannot use it.
When processing certificate issuance requests a care has to be done to
match operations done as LDAP auto-bind to actual principals for
validation. This is a tough one as we have no principal to match for
cn=Directory Manager. Use fake principal to fail validation here and
rely on LDAP ACIs instead.
Fixes: https://pagure.io/freeipa/issue/9583
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
We only get to this code path when running in the server context. At
that point _bindings_installed will be defined. Pylint cannot track this
and always fails with this check.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
In server-like context we use LDAPI connection with auto-binding to LDAP
object based on the UID of the process connecting to LDAPI UNIX domain
socket. This means context.principal is not set and we cannot use it.
Make sure to reject requests unless we are operating as a Directory
Manager in such cases.
Fixes: https://pagure.io/freeipa/issue/9583
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
In server-like context we use LDAPI connection with auto-binding to LDAP
object based on the UID of the process connecting to LDAPI UNIX domain
socket. This means context.principal is not set and we cannot use it.
Make sure to reject requests unless we are operating as a Directory
Manager in such cases.
Fixes: https://pagure.io/freeipa/issue/9583
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
In server-like context we use LDAPI connection with auto-binding to LDAP
object based on the UID of the process connecting to LDAPI UNIX domain
socket. This means context.principal is not set and we cannot use it.
Make sure to reject requests unless we are operating as a Directory
Manager in such cases.
Fixes: https://pagure.io/freeipa/issue/9583
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
When batch runs under server context, we have no context.principal set
because we talk directly to LDAPI endpoint and authenticate using
auto-binding, not GSSAPI. Account to that in the logger.
Fixes: https://pagure.io/freeipa/issue/9583
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
In server-like context we use LDAPI connection with auto-binding to LDAP
object based on the UID of the process connecting to LDAPI UNIX domain
socket. This means context.principal is not set and we cannot use it.
In principal_has_privilege() we can take None principal object as a sign
that currently bound LDAP DN has to be checked for the privilege. This
allows to match any type of account to the privilege, with exception of
the cn=Directory Manager which is never added to privileges explicitly.
cn=Directory Manager will be allowed any privilege because it already
can write to any LDAP entry.
Fixes: https://pagure.io/freeipa/issue/9583
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
SID anchors are only resolvable on servers with DCERPC bindings
installed. On non agent replica these bindings are not installed and
therefore group and role management if there are AD user idoverride
members.
If there is an ipaUserOverride for the anchor, the ipaoriginaluid is
returned.
Fixes: https://pagure.io/freeipa/issue/9544
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Sometimes RUV's are missing the LDAP Url and max/min csns. This prevents
cleanallruv task from running. However, cleanallruv doesn't need to
know the LDAP URL or min/max csns. Added a new paramter to get_run()
called "strict", and when set to False it will still process and
include incomplete RUVs.
Fixes: https://pagure.io/freeipa/issue/9591
Signed-off-by: Mark Reynolds <mreynolds@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
If there is no token name it is safe to assume that an HSM
installation is not requested. The validator assumes that if
there is a token name then the library and password are also
provided.
Fixes: https://pagure.io/freeipa/issue/9593
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
sss_ssh_knownhostsproxy will be deprecated in favor of sss_ssh_knownhosts. This commit
implements a mechanism to apply the change when upgrading from older versions.
Fixes: https://pagure.io/freeipa/issue/9536
Signed-off-by: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
sss_ssh_knownhostsproxy will be deprecated in favor of sss_ssh_knownhosts.
With this update, if the file /usr/bin/sss_ssh_knownhosts is present,
KnownHostsCommand will be used instead of ProxyCommand. Also, GlobalKnownHostsFile
is disabled as it is no longer needed.
Fixes: https://pagure.io/freeipa/issue/9536
Signed-off-by: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Additional SELinux rules are necessary for the HSM to be
managed by IPA and certmonger. Given the infinite possible
naming combinations of library paths and modules this is
a best effort. A message is logged if a missing module
is detected.
Related: https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Don't blow up if the expected module is not installed but warn
about it. Hopefully users will actually read the output and/or the
installation log.
This is done by looking for strings in the path. Not great but
it's at least something.
Related: https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
hsm_validator was validating that the token was available but
not that the provided password worked. Add that capability.
Also call it early in the CA and KRA installation cycle so that
it errors out early. This is particularly important for the KRA
because there is no uninstaller.
Bump the minimum PKI release to 11.5.0 as that contains important
fixes for the HSM.
Remove an unused arguments to hsm_version and hsm_validator.
Related: https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
* Switch to CA user when saving NSS certificates
* Add new certs to internal token, try harder to remove on renewal
* Don't restrict tokens to CKM_RSA_X_509
Related: https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
If a certificate on a token does not have NSS trust set then
it won't be visible in the softoken. This can be disconcerting
for those used to seeing all the certificates.
Loop through the possibilities and set no trust (or Peer) for
all the certificates on the token.
Also ensure that the CA certificate has the correct nickname.
Related: https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Not all HSMs support PKCS#1 v1.5. The nShield nFast is one we know
of so force the KRA to use OAEP in this case..
This can be seen in HSMs where the device doesn't support the
PKCS#1 v1.5 mechanism. It will error out with either "invalid
algorithm" or CKR_FUNCTION_FAILED.
There is currently no good way to test for this capability in
advance of configuration. Testing for mechanisms alone is
insufficient. The only real way to test would be to attempt a
wrap/unwrap but it is very complex.
If the list of affected HSMs increases we can use a table
instead based on "best guess" of some sort of property but
looking for a unique string inside the library path is a
pretty straigthforward way.
Note that this doesn't preclude someone from wanting to require
OAEP directly by modifying the KRA CS.cfg and it won't impact
FIPs mode which requires OAEP.
Related: https://pagure.io/freeipa/issue/9191
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
On a non-HSM, non-renewal-server replica we look in LDAP for
an updated certificate. If the certificates don't match then we
have a new one and write it out. If they match the assumption is
that it hasn't been renewed yet so go into CA_WORKING.
The problem is that for networked HSMs the cert will already be
visible in the database so certmonger will always be in CA_WORKING.
In this case we can assume that if the certs are the same then
that's just fine.
Related: https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Arguments were added to the configuration file to allow specifying
the token option values. These needed to be included into the
defaults as well.
This should be merged into the tests prior to pushing.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Use SoftHSM2 to install an IPA CA to store the keys in an HSM.
Whenenver new keys are generated either in the initial install
or if a KRA is installed then the token needs to be synced
between all servers prior to installing a new CA or KRA.
Fixes: https://pagure.io/freeipa/issue/9273
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This is simple, a port needs to be available to certmonger
to communicate during renewals of CA subsystem certificats.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
A number of files that need to be managed by certmonger
have unconfined_u:object_r:pki_common_t:s0.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This certificate should not be renewed this way.
ipa-cacert-manage renew should be used.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
It would fail eventually with the output in the CA logs but it
wasn't always very obvious and you had to wait a while to find
out about a typo.
Scraping modutil output is a bit ugly but it is guaranteed
to be installed and this should work both with p11-kit and
without.
Related: https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This can be eventually squashed into the main "test" patch but
keeping it separate to make it easier to see what has happened.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Use SoftHSM2 to install an IPA CA to store the keys in an HSM.
Whenenver new keys are generated either in the initial install
or if a KRA is installed then the token needs to be synced
between all servers prior to installing a new CA or KRA.
Fixes: https://pagure.io/freeipa/issue/9273
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Simple function that takes a list of file names and copies
them from one host to another.
It isn't the most efficient but for a small number of files it
should be sufficient.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The PKI audit certificates require that trusted peer (P) be
set on the certificate. This is done already for the CA audit
certificate. Also set this on the KRA audit certificate on
renewal.
https://pagure.io/freeipa/issue/9353
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This script deletes all CA certificates so a new chain
can be loaded. It identified CA certs by those that did
not have private keys. This change adds the ca_flags test
in as well. It is probably sufficient on its own but it
is left for compatibility.
An HSM-based NSS database when not accessing it with the
token will not contain the private keys so removing all
certificates without a private key will remove certificates
that it shouldn't. The NSS softoken stores the certifcate
trust so the certificates will be visible but they lack
private keys because those reside in the HSM. Therefore
deleting any certificate without a private key removed
nearly everything.
Preserve the nickname 'caSigningCert cert-pki-ca'. The
certstore uses the nickame format '{REALM} IPA CA' and
will replace the PKI-named key if we don't act to
preserve it.
Fixes: https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The certificates live on the token so need to be retrieved
from there with the token name. The certificates are visible
in NSS softoken but operations need to be done on the HSM
version. The right password is necessary so retrieve it from
the PKI password store.
Fixes: https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Needed so the helper renew_ca_cert can read password.conf in order
to get the token password. These files are already readable with
FS permissions.
Fixes: https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The bulk of the installer effort to enable HSM support without
having to provide an override file.
This pulls the HSM configuration from a remote server when installing
a replica so that the token name and library don't need to be
passed with every installation.
Fixes: https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This will be used so that when a replica is created it can
configure the HSM without relying on the user to pass in
the same token, library name, etc.
Fixes: https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Pass along the user-provided password file, if any, to the
underlying NSS database. This will provide for per-token
passwords.
If a token is in a nickname then break it out and pass it to
certutil separately.
Fixes: https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Some certificate operations need to be executed as a specific
user so that underlying files will have the correct ownership.
certmogner normally runs as root. The nss-user option defines
a user to switch to when saving NSS certifciates so if a
software token (e.g. SoftHSM) then the files created will be
owned by the token owner.
Fixes: https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The freeipa-client package currently requires nfs-utils.
The requirement can be relaxed and modified into nfs-utils or
nfsv4-client-utils.
Fixes: https://pagure.io/freeipa/issue/9586
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Python netifaces has been unmaintained and its main repository has been
archived since June, 2021.
Python ifaddr is an alternative to netifaces, is currently maintained,
and provides an API which requires little change for FreeIPA current
usage.
This patch modifies FreeIPA to rely on ifaddr instead of neitfaces, due
to its current maintainance status.
Fixes: https://pagure.io/freeipa/issue/9555
Signed-off-by: Rafael Guterres Jeffman <rjeffman@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ca.certStatusUpdateInterval manages how frequently to update
the certificate status in LDAP (expired, etc).
By default this is not set on the initial master and pkispawn sets
it to 0 on replicas. This can lead to no server running this
task and therefore the status attribute not reflecting the current
state.
On enabling CRL generation remove any value which will cause PKI
to use its default. On disabling set it to 0.
Only one server should run the update status task to prevent
unnecessary replication.
Fixes: https://pagure.io/freeipa/issue/9569
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
A previous change made it not possible to remove the admin
user. This also included disabling the admin user. The user can
be disabled, just not deleted because it is required.
Move the test test_ipa_cacert_manage_prune to the end of the
class because it changes time which can break replication.
Fixes: https://pagure.io/freeipa/issue/9489
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The current filter in principal_has_privilege is only working for normal
IPA users where krbprincipalname is matching the principal. An idoverride
user (for example from AD) is not found with this filter.
A new filter for the principal as an ipaOriginalUid has been added as a
second try if a match with krbprincipalname was not found.
principal_has_privilege is used in the replica connection check. The
additional check enables to deploy replicas using an AD user/administrator
that has been added to the "admins" group.
Fixes: https://pagure.io/freeipa/issue/9542
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The error message format changed between releases of OpenSSL.
The updated version has dropped spaces around equal signs
between RDN elements in the subject.
e.g. In 3.1.1 it reports O = EXAMPLE.TEST, CN = IPA RA
and in 3.2.1 reports O=EXAMPLE.TEST, CN=IPA RA
So ignore all spacing in the error message so it works on all
versions.
I saw this in openssl-3.1.1-4.fc39.x86_64 vs
openssl-3.2.1-3.fc41.x86_64
Fixes: https://pagure.io/freeipa/issue/9567
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Python 3 enforces checks on \ sequences in strings. Instead of copying
over the new mix of normal and raw strings from the server side, turn
those strings in the remote plugins to raw mode.
Fixes: https://pagure.io/freeipa/issue/9565
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The ipa tool has nearly since epoch returned 2 for the case of
entry not found.
The certificate processing raises a separate error,
CertificateOperationsError, when something goes wrong.
This returns 1.
With the introduction of the JSON API most requests will get
a proper HTTP return code representing what went wrong. In this
case we can use 404 to determine if the request resulted in
a NotFound therefore can eventually return a 2 and be
consistent in return values.
Related: https://pagure.io/freeipa/issue/9562
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The commands ca-show and cert-show provide the ability to direct
the certificate output to a file. If the requested object was
not present then this resulted in a zero-length file.
This is because the check to determine if the file was writable,
by opening it, was done prior to the operation to retrieve
the entry.
So move the check after the data retrieval.
Also convert cert-show to be more consistent with ca-show.
I considered cleaning up the empty file afterward but IMHO we
shouldn't touch the file until we're ready to write. This
costs an API roundtrip but its a small price to pay for
potentially protecting existing data.
Fixes: https://pagure.io/freeipa/issue/9562
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
- kinit helpers are now in `ipalib.kinit`.
- helpers can now use default ccache locations like many other similar
helpers
- helpers return the result from `run` for debugging
- constants are now in `krb_utils`
- helpers pass `KRB5*` and `GSS*` env vars along, so `KRB5_TRACE` works
- document how to kinit for `ipalib.api`
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
SIDGEN plugin only uses local ID ranges and thus a restart is really
needed only when a local range is added, modified or removed.
Also fix the SSSD warning because removal of any range requires restart
everywhere, not just on a specific server.
Fixes: https://pagure.io/freeipa/issue/9558
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Currently the test is using IPA_NSSDB_PWDFILE_TXT which is /etc/ipa/nssdb/pwdfile.txt
which causes error in STIG mode.
[root@master slapd-TESTRELM-TEST]# certutil -M -n 'TESTRELM.TEST IPA CA' -t ',,' -d . -f /etc/ipa/nssdb/pwdfile.txt
Incorrect password/PIN entered.
Hence modified the test to include paths.ETC_DIRSRV_SLAPD_INSTANCE_TEMPLATE/pwd.txt.
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
After the addition of a new idrange, the sidgen plugin is not
immediately aware of the new idrange and a restart of 389ds is
required. Otherwise the creation of new user/group with a uid/gid
inside the new range fails to grant a SID to the user/group.
Fixes: https://pagure.io/freeipa/issue/9558
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When get_realmdomains() method is called, it will filter out subdomains
of the IPA primary domain. This is required because Active Directory
domain controllers are assuming subdomains already covered by the main
domain namespace.
[MS-LSAD] 3.1.4.7.16.1, 'Forest Trust Collision Generation' defines the
method of validating the forest trust information. They are the same as
rules in [MS-ADTS] section 6.1.6. Specifically,
- A top-level name must not be superior to an enabled top-level name
for another trusted domain object, unless the current trusted domain
object has a corresponding exclusion record.
In practice, we filtered those subdomains already but the code wasn't
invalidating a previously retrieved forest trust information.
Fixes: https://pagure.io/freeipa/issue/9551
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The function slapi_pblock_set_flag_operation_notes(); is defined in
ldap/servers/slapd/pblock.c in 389-ds but is only available through
slapi-private.h header, not through slapi-plugin.h public API.
It was introduced in ~1.4.1.7 (~2019) via https://pagure.io/389-ds-base/issue/50349.
Since we only use it with an MFA note, all versions of the 389-ds that
will support MFA note will have this function.
Fixes: https://pagure.io/freeipa/issue/9554
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
When authentication indicators were introduced in 2016, ipa-pwd-extop
plugin gained ability to reject LDAP BIND when an LDAP client insists
the authentication must use an OTP token. This is used by ipa-otpd to
ensure Kerberos authentication using OTP method is done with at least
two factors (the token and the password).
This enfrocement is only possible when an LDAP client sends the LDAP
control. There are cases when LDAP clients cannot be configured to send
a custom LDAP control during BIND operation. For these clients an LDAP
BIND against an account that only has password and no valid token would
succeed even if admins intend it to fail.
Ability to do LDAP BIND without a token was added to allow users to add
their own OTP tokens securely. If administrators require full
enforcement over LDAP BIND, it is cannot be achieved with LDAP without
sending the LDAP control to do so.
Add IPA configuration string, EnforceLDAPOTP, to allow administrators to
prevent LDAP BIND with a password only if user is required to have OTP
tokens. With this configuration enabled, it will be not possible for
users to add OTP token if one is missing, thus ensuring no user can
authenticate without OTP and admins will have to add initial OTP tokens
to users explicitly.
Fixes: https://pagure.io/freeipa/issue/5169
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
There is a fallback when creating the wrapping key but one was missing
when trying to use the cached transport_cert.
This allows, along with forcing keyWrap.useOAEP=true, vault creation
on an nCipher HSM.
This can be seen in HSMs where the device doesn't support the
PKCS#1 v1.5 mechanism. It will error out with either "invalid
algorithm" or CKR_FUNCTION_FAILED.
Related: https://pagure.io/freeipa/issue/9191
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
A few tests are changing the date back and forth using for
instance date -s +3Years+1day and date -s -3Years-1day.
This method does not bring the system back to the current date
if executed around Feb 28 or 29 on a leap year, and may result
in de-synchronized server and client.
Add a note in the test to warn about potential future failures.
Related: https://pagure.io/freeipa/issue/9548
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ipa-restore is relying on the presence of specific directories,
e.g. /var/lib/dirsrv/slapd-/db/ipaca, to detect
which backends are in use (userRoot or ipaca).
With the switch to LMDB, these directories do not exist and the
restore fails finding the ipaca backend.
Use lib389.cli_ctl.dblib.run_dbscan utility instead to
check which backends are present.
This method was been introduced in 389ds 2.1.0 and works with
Berkeley DB and LMDB.
Add a --data option to the ipa-backup and ipa-restore tasks to do
only an LDIF backup and restore. Also add the ability to restore by
backend.
Add new tests to do a data-only backup and restore.
Fixes: https://pagure.io/freeipa/issue/9526
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The actual value is less important than whether it matches the
regular expression. A number of legal but difficult to know in
context realms could be passed in here (trust for example).
This fixes CVE-2024-1481
Fixes: https://pagure.io/freeipa/issue/9541
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Do minimal validation of the Kerberos principal name when passing it to
kinit command line tool. Also pass it as the final argument to prevent
option injection.
Accepted Kerberos principals are:
- user names, using the following regexp
(username with optional @realm, no spaces or slashes in the name):
"(?!^[0-9]+$)^[a-zA-Z0-9_.][a-zA-Z0-9_.-]*[a-zA-Z0-9_.$-]?@?[a-zA-Z0-9.-]*$"
- service names (with slash in the name but no spaces). Validation of
the hostname is done. There is no validation of the service name.
The regular expression above also covers cases where a principal name
starts with '-'. This prevents option injection as well.
This fixes CVE-2024-1481
Fixes: https://pagure.io/freeipa/issue/9541
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Modify ipadb_reinit_mspac() to allocate and initialize ipactx->mspac
only if all its attributes can be set. If not, ipactx->mspac is set to
NULL. This makes easier to determine if the KDC is able to generate PACs
or not.
Also ipadb_reinit_mspac() is now able to return a status message
explaining why initialization of the PAC generator failed. This message
is printed in KDC logs.
Fixes: https://pagure.io/freeipa/issue/9535
Signed-off-by: Julien Rische <jrische@redhat.com>
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
With the fix for https://pagure.io/freeipa/issue/9171, the
method entry.single_value['nsds5replicaupdateinprogress'] now
returns a Boolean instead of a string "TRUE"/"FALSE".
The method tasks.wait_for_replication needs to be fixed so that
it properly detects when replication is not done.
Fixes: https://pagure.io/freeipa/issue/9530
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Because of SSSD issue 7169, secondary groups are not
retrieved when autoprivate group is set and an idoverride
replaces the user's primary group.
Mark the known issues as xfail.
Related: https://github.com/SSSD/sssd/issues/7169
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Samba 4.20 will change name extension of the private libraries from
'samba4' to 'private-samba'. Detect private extension through configure
step and make sure to use the right library name in Makefile.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
CADogtagCertsConfigCheck is no more available on RHEL9, hence the
respective tests are skipped.
Check 'CADogtagCertsConfigCheck' not found in Source 'pki.server.healthcheck.meta.csconfig'
Ref: https://issues.redhat.com/browse/RHEL-21367
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
On rawhide, the package wget has been replaced with wget2
(more info in https://bugzilla.redhat.com/show_bug.cgi?id=2254790).
The test test_idp is checking that the sudo command is working
for a keycloak user, by creating a sudo rule for the yum command
and calling sudo yum list wget.
As the wget package does not exist any more on Rawhide, the command
returns an error:
Error: No matching Packages to list
and the test fails.
Replace the call "sudo yum list wget" with a call to "sudo yum list yum"
as the yum package is always present.
Fixes: https://pagure.io/freeipa/issue/9522
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ipa-backup is relying on the presence of the directory
/var/lib/dirsrv/slapd-<INSTANCE>/db/ipaca/
to detect if the CA is installed on the server and backup
the ipaca backend.
With the switch to LMDB, this directory does not exist and the
backup is missing ipaca information.
Use lib389.cli_ctl.dblib.run_dbscan utility instead to
check if ipaca backend is present (this method has been
introduced in 389ds 2.1.0 and works with Berkeley DB and LMDB).
Fixes: https://pagure.io/freeipa/issue/9516
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Thierry Bordaz <tbordaz@redhat.com>
krbCanonicalName is mandatory for services but IPA services created
before commit e6ff83e (FreeIPA 4.4.0, ~2016) had no normalization done
to set krbCanonicalName; services created after that version were
upgraded to do have krbCanonicalName.
Accept krbPrincipalName alone since they have no alias either */
Fixes: https://pagure.io/freeipa/issue/9465
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Thierry Bordaz <tbordaz@redhat.com>
Staged users have
uidNumber: -1
gidNumber: -1
ipaUniqueID: autogenerate
We cannot generate ipaSecurityIdentifier based on those UID/GID numbers.
However, '-1' value will trigger an error
find_sid_for_ldap_entry - [file ipa_sidgen_common.c, line 483]: ID value too large.
And that, in turn, will cause stopping SID generation for all users.
Detect 'ipaUniqueID: autogenerate' situation and ignore these entries.
Fixes: https://pagure.io/freeipa/issue/9517
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Thierry Bordaz <tbordaz@redhat.com>
Vault uses PKCS1v15 as default padding wrapping algo, which is not an approved
FIPS algorithm. This commit ensures that KRA is installed with RSA-OAEP if FIPS
is enabled. It also handles upgrade path.
Fixes: https://pagure.io/freeipa/issue/9191
Signed-off-by: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
If a vault operation fails, the error message just says "InternalError". This commit
improves error handling of key archival and retrieval calls by catching the PKIException
error and raising it as an IPA error.
Related: https://pagure.io/freeipa/issue/9191
Signed-off-by: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
None of the FIPS certified modules in RHEL support PKCS#1 v1.5 as FIPS
approved mechanism. This commit adds support for RSA-OAEP padding as a
fallback.
Fixes: https://pagure.io/freeipa/issue/9191
Signed-off-by: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
`ipapython.session_storage.get_data` iterates over
credentials in a credential cache till `krb5_cc_next_cred` returns
an error. This function doesn't expect any error on calling
other kerberos foreign functions during iteration. But that can
actually happen and KRB5Error exceptions stop an iteration while
they should be propagated.
With this change iteration will exactly stop on `krb5_cc_next_cred`
error as it was supposed to be.
Fixes: https://pagure.io/freeipa/issue/9519
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Cryptography 42.0.0 introduced two new abstract properties
`not_valid_before_utc` and `not_valid_after_utc`, which are non-naive UTC
variants of the `not_valid_before` and `not_valid_after` properties.
The old properties are deprecated. The changeset also modifies code and
tests to use the new `_utc` variants.
Fixes: https://pagure.io/freeipa/issue/9518
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
This should not have been gated on options.setup_ca because we need
the RA agent on all servers if there is a CA in the topology otherwise
the non-CA servers won't be able to communicate with the CA.
Fixes: https://pagure.io/freeipa/issue/9510
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Unfortunately, using pydata_sphinx_theme extension generates warnings in
sphix processing. These warnings cause documentation build to be
considered a failure:
WARNING: the pydata_sphinx_theme extension is not safe for parallel writing
WARNING: doing serial write
....
build finished with problems, 2 warnings.
make: *** [Makefile:24: html] Error 1
Since the build is already doing a serial write, enforce it from start.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
test_ipa_ca_records and test_adtrust_system_records can fail with
NXDOMAIN, because it doesn't wait enough for the update on replica.
It can be resolved by waiting for the update with wait_for_replication.
Fixes: https://pagure.io/freeipa/issue/9504
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
ca_enable and kra_enabled are intended to be used to identify that
a CA or KRA is available in the topology. It was also being used
to determine whether a CA or KRA service is desired on a replica
install, rather than options.setup_[ca|kra]
Fixes: https://pagure.io/freeipa/issue/9510
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Some tools may pass None as NetBIOS name if not put explicitly by a
user. This meant to use default NetBIOS name generator based on the
domain (realm) name. However, this wasn't done properly, so None is
passed later to python-ldap and it rejects such LDAP entry.
Fixes: https://pagure.io/freeipa/issue/9514
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Fedora 39 is now officically available. Update the test definitions:
- lastest now uses f39
- previous now uses f38
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
Since commit 5c0e7a5fb4, a new extended
operation to get a keytab is supposed to be used. This keytab
setting/retrieval extended operation checks access rights of the bound
DN to write to a virtual attribute 'ipaProtectedOperation;write_keys'.
If the write isn't allowed, the operation is rejected and ipa-getkeytab
tool falls back to an older code that generates the keytab on the client
and forcibly sets to the LDAP entry. For the latter, a check is done to
make sure the bound DN is allowed to write to 'krbPrincipalKey' attribute.
This fallback should never happen for newer deployments. When enrollemnt
operation is delegated to non-administrative user with the help of 'Host
Enrollment' role, a host can be pre-created or created at enrollment
time, if this non-administrative user has 'Host Administrators' role. In
the latter case a system permission 'System: Manage Host Keytab' grants
write access to 'krbPrincipalKey' attribute but lacks any access to the
virtual attributes expected by the new extended operation.
There is a second virtual attribute, 'ipaProtectedOperation;read_keys',
that allows to retrieve existing keys for a host. However, during
initial enrollment we do not allow to retrieve and reuse existing
Kerberos key: while 'ipa-getkeytab -r' would give ability to retrieve
the existing key, 'ipa-join' has no way to trigger that operation.
Hence, permission 'System: Manage Host Keytab' will not grant the right
to read the Kerberos key via extended operation used by 'ipa-getkeytab
-r'. Such operation can be done later by utilizing 'ipa
service/host-allow-retrieve-keytab' commands.
Fix 'System: Manage Host Keytab' permission and extend a permission test
to see that we do not fallback to the old extended operation.
Fixes: https://pagure.io/freeipa/issue/9496
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Adds 'givenname', 'sn' and 'nsaccountlock' columns to the user group members
and makes columns in the users view and user group members unified.
i.e. Makes easy to see disabled users in the group.
Fixes: https://pagure.io/freeipa/issue/9390
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Carla Martinez <carlmart@redhat.com>
This function is designed to retrieve a value from an
ini-like file. In particular PKI CS.cfg.
In an attempt to be more efficient a substring search,
using startswith(), is used before calling a regular
expression match.
The problem is that if the requested directive is a
substring of a different one then it will pass the
startswith() and fail the regular expression match
with a ValueError, assuming it is malformed.
There is no need for this. The caller must be able to
handle None as a response anyway. So continue if
no match is found.
This was seen when PKI dropped storing certificate blobs
in CS.cfg. The CA certificate is stored in ca.signing.cert.
If it isn't present then ca.signing.certnickname will match
the substring but not the directive. This should not be
treated as an error.
Fixes: https://pagure.io/freeipa/issue/9506
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
We want to avoid splitting a replica server installation between
two hosts where possible so if a CA or KRA is requested then
we only try to install against a remote server that also provides
those capabilities. This avoids race conditions.
If a CA or KRA is not requested and the user has provided a
server to install against then use that instead of overriding it.
Extend the logic of picking the remote Custodia mode
(KRA, CA, *MASTER*) to include considering whether the
CA and KRA services are requested. If the service(s) are
not requested the the associated hostname may not be
reliable.
Fixes: https://pagure.io/freeipa/issue/9491
Related: https://pagure.io/freeipa/issue/9289
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The automount installation was failing. Confirm that it is fixed.
The uninstall was not restoring all files/configuration. Verify
that the index and state files are gone which means that all state
and files were restored.
Fixes: https://pagure.io/freeipa/issue/9487
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Issue 8384 introduced a new installation state for the statestore
to identify when client/server installation is completely finished
rather than relying on has_files().
The problem is that ipa-client-automount may be called during
ipa-client-install and since installation is not complete at that
point the automount install was failing with "IPA client not
configured".
Add a new state, 'automount', to designate that automount installation
is in process. If check_client_configuration() fails it checks to
see if [installation] automount is True. If so it continues with the
installation.
This also addresses an issue where the filestore and statestore are
shared between the client and automount installers but the client
wasn't refreshing state after automount completed. This resulted in
an incomplete state and index file of backed-up files which caused
files to not be restored on uninstall and the state file to be
orphaned.
Fixes: https://pagure.io/freeipa/issue/9487
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
test_ipahealthcheck_ds_encryption tests are failing
in RHEL9 SUT because in this test tls protocol version
is set to TLS1.0 using the below command, but its
reset to TLS1.2 causing the test to fail.
'dsconf', 'slapd-TESTREALM-TEST', 'security', 'set', '--tls-protocol-min=TLS1.0'
Hence the test is skipped to be run on RHEL9.0 SUT.
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Up to PKI 11.5.0 even when a pki-server call failed it had a
return value of 0. This was fixed in 11.5.0 which breaks
ipa-acme-manage pruning. If a configuration value is not set
then the call fails and the tool gives up with an error like:
ERROR: No such parameter: jobsScheduler.job.pruning.certRetentionUnit
In previous versions this resulted in an empty string so the tool
displayed the default value.
So now upon failure look in the stderr output for "No such parameter"
and return an empty string so the behavior is consistent between
both old and new PKI server versions.
Fixes: https://pagure.io/freeipa/issue/9503
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Validate that the change_password and login_password endpoints
verify the HTTP Referer header. There is some overlap in the
tests: belt and suspenders.
All endpoints except session/login_x509 are covered, sometimes
having to rely on expected bad results (see the i18n endpoint).
session/login_x509 is not tested yet as it requires significant
additional setup in order to associate a user certificate with
a user entry, etc.
This can be manually verified by modifying /etc/httpd/conf.d/ipa.conf
and adding:
Satisfy Any
Require all granted
Then comment out Auth and SSLVerify, etc. and restart httpd.
With a valid Referer will fail with a 401 and log that there is no
KRB5CCNAME. This comes after the referer check.
With an invalid Referer it will fail with a 400 Bad Request as
expected.
CVE-2023-5455
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
The referer was only checked in WSGIExecutioner classes:
- jsonserver
- KerberosWSGIExecutioner
- xmlserver
- jsonserver_kerb
This left /i18n_messages, /session/login_kerberos,
/session/login_x509, /session/login_password,
/session/change_password and /session/sync_token unprotected
against CSRF attacks.
CVE-2023-5455
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Lay out the supported migration paths. Users are likely to get
creative with migration so we need to narrow the path for which
we can provide support.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Tox is creating a virtual environment before execution.
With python 3.12 the virtual env does not include any
more setuptools, so use setuptools from the globally
installed packages.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Fix the following errors:
I0021(useless-suppression)
R1710(inconsistent-return-statements)
E1101(no-member)
Ignore the following errors:
E0601(used-before-assignment)
The variable is imported when the code is run in_server.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
pylint 3.0 introduces new checks that raise too many errors:
use-implicit-booleaness-not-comparison-to-string,
use-implicit-booleaness-not-comparison-to-zero,
broad-exception-raised,
Disable the new checks in pylintrc
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
pylint 3.0 has deprectated a few functions:
- check_messages: Use utils.only_required_for_messages
- The config attribute of BaseChecker has been deprecated. You can
use checker.linter.config to access the global configuration object
instead of a checker-specific object
- Everything related to the __implements__ construct was removed.
- Checker should only inherit BaseChecker or any of the other checker
types from pylint.checkers.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Update python3 to ensure the fix for BZ 2252567 is pulled.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Previously, for a global policy which does not include
'password', krb5kdc restart was failing. Now it should succeed.
We set admin user authentication type to PASSWORD to simplify
configuration in the test.
What matters here is that global policy does not include PKINIT and that
means a code in the ticket policy check will allow PKINIT implicitly
rather than explicitly.
Related: https://pagure.io/freeipa/issue/9485
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
PKINIT differs from other pre-authentication methods by the fact that it
can be matched indepedently of the user authentication types via certmap
plugin in KDC.
Since PKINIT is a strong authentication method, allow its authentication
indicator and only apply the ticket policy.
Fixes: https://pagure.io/freeipa/issue/9485
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
If default user authentication type is set to a list that does not
include a password or a hardened credential, the resulting configuration
might be incorrect for special service principals, including a krbtgt/..
one.
Add detection of special principals to avoid these situations and always
allow password or hardened for services.
Special handling is needed for the following principals:
- krbtgt/.. -- TGT service principals
- K/M -- master key principal
- kadmin/changepw -- service for changing passwords
- kadmin/kadmin -- kadmin service principal
- kadmin/history -- key used to encrypt history
Additionally, implicitly allow password or hardened credential use for
IPA services and IPA hosts since applications typically use keytabs for
that purpose.
Fixes: https://pagure.io/freeipa/issue/9485
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
The 2 following tests rely on dnf install and use
mirrors.fedoraproject.org which has a broken trust chain.
Disable dnssec validation so that dnf succeeds.
Fixes: https://pagure.io/freeipa/issue/9498
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
hbactest does a number of internal searches, one of which
can exceed the configured sizelimit: hbacrule-find
Collect any messages returned from thsi call and display them
to the user on the cli.
Fixes: https://pagure.io/freeipa/issue/9486
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The pki_theme_enable and pki_theme_server_dir params are not
used by pkispawn so they can be removed.
Signed-off-by: Endi Sukma Dewata <edewata@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
With selenium driver 4.10 and above, the API for Firefox driver
initialization has changed and does not use any more the
log_path argument.
The log path is now provided through a FirefoxService option
in the webdriver initialization.
Fixes: https://pagure.io/freeipa/issue/9492
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
The test TestKRAinstallAfterCertRenew is moving the
date in the future in order to reach the grace period where
certmonger detects some certificates need to be renewed.
Restart the services after the date change.
Fixes: https://pagure.io/freeipa/issue/9405
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
The integration test is using selenium web driver to simulate a
user authentication with an external IdP. The user performs kinit
and is provided with a URL where he needs to authenticate.
The test was written for selenium API 4.9 and must be adapted to
the changes introduced in 4.10:
- the headless method has been deprecated
- executable_path argument has been deprecated
Fixes: https://pagure.io/freeipa/issue/9493
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
The integration test test_external_ca.py is not compatible with
python-cryptography 41.0.0+.
The test is installing ipa server with an externally-signed CA cert
using a Microsoft Certificate Service profile:
ipa-server-install --external-ca --external-ca-type ms-cs
--external-ca-profile "1.2.3.4:10:200"
The command generates a CSR in /root/ipa.csr. The test reads the CSR,
extracts the extensions and compares with the requested extension
for the Microsoft Template.
With python-cryptography 41.0.0+, the extension can be decoded as
cryptography.x509.MSCertificateTemplate while with older version
the extension is decoded as cryptography.x509.UnrecognizedExtension.
Handle both cases properly.
Fixes: https://pagure.io/freeipa/issue/9490
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Changes in ipa-tuura project are breaking the test
(removal of a script required for test preparation).
Disable the test until a solution is found in ipa-tuura.
Related: https://pagure.io/freeipa/issue/9476
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Antonio Torres <antorres@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
ipa-healthcheck commit e69589d5 changed the output when a service
keytab is missing to not report the GSSAPI error but to report
that the keytab doesn't exist at all. This distinguishes from real
Kerberos issues like kvno.
Fixes: https://pagure.io/freeipa/issue/9482
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Log buffering is disabled in the integration tests so we can have all
the logs at the end. This is causing a warning to show in the 389-ds
checks and causing tests to fail that expect all SUCCESS.
Add an exclude for this specific key so tests will pass again.
We may eventually want a more sophisiticated mechanism to handle
excludes, or updating the config in general, but this is fine for now.
Fixes: https://pagure.io/freeipa/issue/9400
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
ipa-healthcheck commit 31be12b introduced a change in the output
message when pki-tomcatd is not running.
With versions <= 0.12, the service name is displayed as
pki_tomcatd (with an underscore), but with 0.13+ it is
pki-tomcatd (with a dash).
Fixes: https://pagure.io/freeipa/issue/9460
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The command ipa group-add-member --external aduser@addomain.test
fails with an internal error when used with samba 4.19.
The command internally calls samba.security.dom_sid(sid) which
used to raise a TypeError but now raises a ValueError
(commit 9abdd67 on https://github.com/samba-team/samba).
IPA source code needs to handle properly both exception types.
Fixes: https://pagure.io/freeipa/issue/9466
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
1. test_certmonger_reads_token_HSM test in test_installaton.py
is failing in FIPS/STIG mode with the below error.
SEC_ERROR_PKCS12_UNABLE_TO_IMPORT_KEY: Unable to import.
Error attempting to import private key in STIG mode
2. Adding the posfix config change, because there was a crash
seen in smtpd in FIPS mode.
ie. postconf -e smtpd_tls_fingerprint_digest=sha256
KCS: https://access.redhat.com/solutions/6958957
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The subsystem.select is not a reliable indicator to determine
whether the CA is a renewal master since there is no process in
PKI to update the param when the role of the instance changes
(from master to clone and vice versa) so the param has been
removed in PKI 11.5.
Instead, it's better to use CAInstance.is_crlgen_enabled() since
CRL generation is only enabled in a renewal master.
Signed-off-by: Endi Sukma Dewata <edewata@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The hierarchy.select param has been removed in PKI 11.5 so
it doesn't need to be updated in renew_ca_cert.in.
Signed-off-by: Endi Sukma Dewata <edewata@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Currently LWCA is only supported in IPA since the key
replication depends on Custodia, so LWCA is not actually
supported in regular PKI installation. However, currently
the AuthorityMonitor is enabled by default and it executes
a persistent search to monitor LWCA replication so it is
wasting resources in non-IPA environment.
To reduce unnecessary resource consumption the LWCA monitor
will be disabled by default in PKI, so IPA will need to
enable it explicitly for new and existing installations.
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
If something in the client sysrestore.state wasn't removed by
the installer a warning message was printed with an incorrect
location. Fix this by using constants instead.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The class IPACertificate builds objects from x509 Certificate
objects and creates the not_valid_before and not_valid_after values
by converting to a timestamp + applying timezone delta to UTC + reading
from the timestamp. This results in applying twice the delta.
Use a simpler method that replaces the timezone info with UTC in the
datetime object.
Fixes: https://pagure.io/freeipa/issue/9462
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This is a side-effect of adding the libpwquality options. It
imposes its own hardcoded minimum password length so some care
was needed to ensure that it isn't set too low.
So if there are no libpwquality options used then it's fine to
have no minlength in the policy.
Fixes: https://pagure.io/freeipa/issue/9297
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The test is comparing the PID of services before and after
calling ipactl start, expecting to have the same value.
It should not compare the pid for ipa-dnskeysyncd as this service
is automatically restarted upon failure.
Fixes: https://pagure.io/freeipa/issue/9415
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-healthcheck --indent option expects an integer. The error
message changed with ipa-healthcheck 0.13.
Recent versions also check that the value is in the range 0-32.
The test must be compatible with old and new versions.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The test often fails when running in parallel to other tests as very
little memory is left. 389-ds memory autotuning causes database backend
to refuse working in such cases. 389-ds team suggested more memory has
to be made available.
Increate RAM for this test to 2.5GB instead of 2.2GB.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
`ipalib.API` instances like `ipalib.api` now provide a context manager
that connects and disconnects the API object. Users no longer have to
deal with different types of backends or finalize the API correctly.
```python
import ipalib
with ipalib.api as api:
api.Commands.ping()
```
See: https://pagure.io/freeipa/issue/9443
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Many of the workshop pages links are directing to URLs that end with
".rst" instead of ".html", as a result, these links are broken.
This commit introduces explicit targets and references to ensure that
the pages are correctly linked.
Signed-off-by: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
When system date is moved into future, it have unprecedented
behavior i.e CA becomes irresponsive or unexpected certificcate
state. Hence restart the ipa service after moving the date to
gracefully serve the request.
Fixes: https://pagure.io/freeipa/issue/9379
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Main SELinux policy will allow transition of passkey_child (SSSD) to
ipa_otpd_t context to perform FIDO2 operations with USB devices.
This means ipa-otpd will need to be able to read data from sysfs and
connect to USB devices.
Add required permissions to IPA subpolicy as well. See rhbz#2238224 for
discussion.
Related: https://pagure.io/freeipa/issue/9434
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Zdenek Pytela <zpytela@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The replica install was unilaterally removing KRB5CCNAME from
os.environ in some cases. Instead check first to see if it is
present and only remove in that case.
Fixes: https://pagure.io/freeipa/issue/9446
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
For passkeys (FIDO2) support, SSSD uses libfido2 library which needs
access to USB devices. Add SELinux booleans handling to ipa-client-install
so that correct SELinux booleans can be enabled and disabled during
install and uninstall. Ignore and record a warning when SELinux policy
does not support the boolean.
Fixes: https://pagure.io/freeipa/issue/9434
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
389DS supports BDB and LMDB backends. FreeIPA installation fails with
LMDB backend since it tries to apply tuning for BDB backend.
Instead, tuning for BDB should be applied only when 389DS uses BDB
backend.
Fixes: https://pagure.io/freeipa/issue/9435
Signed-off-by: Viktor Ashirov <vashirov@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Write a new krb5.conf in case any values changed finding the
right server to configure against (e.g. for CA, KRA) and
ensure the API connection is to the remote server that
will be installed against.
When finding a CA or KRA during initial replica installation
set the remote master as well. The order is:
- existing server value in /etc/ipa/default.conf
- the chosen CA host if the server doesn't provide one
- the chosen KRA host if the server doesn't provide one
This is more or less heirarchical. If a server is provided
then that is considered first. If it provides all the
optional services needed (CA and/or KRA) then it will
be used. Otherwise it will fall back to a server that provides
all the required services.
In short, providing --server either at client install or
with ipa-replica-install is no guarantee that it will
define all topology. This may be unexpected behavior.
For the case of adding a CA or KRA things are effectively
unchanged. This type of install does not appear to be
impacted by affinity issues.
Fixes: https://pagure.io/freeipa/issue/9289
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Clean up and remove obsolete code from ipa-replica-install. For several
versions replica installer first ensures that a host is an IPA client,
then promotes the client to a replica. The client installer code sets up
CA stores like IPA_CA_CRT already.
Related: https://pagure.io/freeipa/issue/9272
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
The ipaidpuser objectclass is required for the attribute ipaidpsub.
When a user is created or modified with --idp-user-id, the operation
must ensure that the objectclass is added if missing.
Add a test for user creation and user modification with --idp-user-id.
Fixes: https://pagure.io/freeipa/issue/9433
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The dogtag REST API has a change of behavior regarding
revocation reason 8, REMOVE_FROM_CRL. The XML interface
accepts it blindly and marks the certifiate as revoked.
This is complicated within RFC 5280 but the jist is that
it only affects a certificate on hold and only for delta
CRLs.
So this modifies the behavior of revocation 8 so that
the certificate is put on hold (6) first.
Fixes: https://pagure.io/freeipa/issue/9345
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The XML API is already deprecated and will be removed in some
future release.
All but the updateCRL API has an equivalent in REST. The upstream
dogtag project documents most of the API at
https://github.com/dogtagpki/pki/wiki/REST-API . I say most
because not every API includes sample input/output. The
pki ca-cert command is a good substitute for seeing how the API
is used by their own tooling.
This changes no pre-existing conventions. All serial numbers are
converted to decimal prior to transmission and are treated as
strings to avoid previous limitations with sizing (which would
have been exacerbated by random serial numbers).
Fixes: https://pagure.io/freeipa/issue/9345
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
There is one hour time difference between expiry of ACME cert if
the certificate is issued while daylight saving is start and
expires after DST ends. For 2023 daylight saving time start at
Sunday 12 March and ends at Sunday 5 November. Every certificate
which is expiring after November 5th will have 1 hour difference in
expiry.
Fix is to use 90days+2hours to expire the cert.
Fixes: https://pagure.io/freeipa/issue/9428
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
LDAPSearch class constructs a filter from a set of attributes and their
values passed in by the command. During this construction process a
limited set of attributes gets converted to a special form, the rest is
simply taken as a string and escaped according to LDAP rules.
This means DateTime class would simply be converted to string using
str(DateTime) and that uses default formatting method. For LDAP we need
to apply a specific formatting method instead.
Following LDAP attributes now handled as datetime.datetime:
( 1.3.6.1.4.1.5322.21.2.5 NAME 'krbLastAdminUnlock' EQUALITY generalizedTimeMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE)
( 2.16.840.1.113719.1.301.4.6.1 NAME 'krbPrincipalExpiration' EQUALITY generalizedTimeMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE)
( 2.16.840.1.113719.1.301.4.37.1 NAME 'krbPasswordExpiration' EQUALITY generalizedTimeMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE)
( 2.16.840.1.113719.1.301.4.45.1 NAME 'krbLastPwdChange' EQUALITY generalizedTimeMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE)
( 2.16.840.1.113719.1.301.4.48.1 NAME 'krbLastSuccessfulAuth' EQUALITY generalizedTimeMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE)
( 2.16.840.1.113719.1.301.4.49.1 NAME 'krbLastFailedAuth' EQUALITY generalizedTimeMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE)
( 2.16.840.1.113730.3.8.16.1.3 NAME 'ipatokenNotBefore' DESC 'Token validity date' EQUALITY generalizedTimeMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE X-ORIGIN 'IPA OTP')
( 2.16.840.1.113730.3.8.16.1.4 NAME 'ipatokenNotAfter' DESC 'Token expiration date' EQUALITY generalizedTimeMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE X-ORIGIN 'IPA OTP')
Fixes: https://pagure.io/freeipa/issue/9395
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Antonio Torres <antorres@redhat.com>
An attempt to do this was already coded but the wrong
argument was used. It was passing in the location name and
not the map name so the map wouldn't be completely removed.
Include a test to verify that the map is gone after removing
it by calling automountlocation-tofiles which will fail if the
map wasn't properly removed.
Fixes: https://pagure.io/freeipa/issue/9397
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The description of "Subordinate ID Selfservice User" role had
'subordiante' instead of 'subordinate'.
This patch corrects the default value and adds a replace to fix
existing deployments.
Related: https://pagure.io/freeipa/issue/9418
Signed-off-by: Rafael Guterres Jeffman <rjeffman@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
ipa-server-guard reads a lock file in order to
check if the lock is still taken by comparing
the stored value, for instance:
expire = 20230810155452589311
with the current datetime.
The expire value needs to be timezone-aware in
order to be compared with "now" which is also tz aware.
Related: https://pagure.io/freeipa/issue/9425
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ipa-cert-fix compares the current datetime with the
value obtained from a cert.not_valid_after.
With the fix for #9425, not_valid_after is timezone
aware and cannot be compared to a naive datetime.
Make the datetime "now" timezone aware.
Related: https://pagure.io/freeipa/issue/9425
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ipa-epn is using timezone-aware timestamps for "now"
but converts krbpasswordexpiration attribute into
a naive datetime object that is missing the tzinfo.
It is not possible to substract timezone aware and
naive values. Convert krbpasswordexpiration attribute
into an UTC value before doing the substration.
Related: https://pagure.io/freeipa/issue/9425
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
If there is already a sssd.conf file before the installer is
executed, the nss and pam services may not be enabled by the
installer. This happens for instance if the machine is hardened
for STIG and sssd.conf does not define services=... in the
[sssd] section.
The consequence is that trust cannot be established with an AD
domain.
The installer must enable nss and pam services even if there is
a pre-existing sssd.conf file.
Fixes: https://pagure.io/freeipa/issue/9427
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The fixture issue_and_expire_acme_cert returns a function
that fills the hosts array. If the function is not called in
the test (for instance because a test is skipped, as in
TestACMEPrune::test_prune_cert_search_size_limit), hosts = []
and hosts[0] raises an IndexError.
Fix the fixture to check first that hosts is not empty.
Related: https://pagure.io/freeipa/issue/9348
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
In the future pkispawn will validate all path params so the
default values for pki_ca_signing_csr_path and
pki_ca_signing_cert_path need to be removed since they point
to non-existent files. When the params are actually used for
installing an external CA, CAInstance.__spawn_instance()
will initialize them with the correct paths.
Signed-off-by: Endi Sukma Dewata <edewata@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The test TestTopologyOptions::test_add_remove_segment is
randomly failing downstream. Test scenario:
- create a line topology master <-> repl1 <-> repl2
- create user on master
- wait for repl success on master
- check that the user is seen on repl2
The test waits for replication to complete on the master but
it should also wait for the replication to complete on repl1
before checking the user presence on repl2.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
In the future pkispawn will validate all path params so the
default value for pki_cert_chain_path needs to be removed
since it points to a non-existent file. When the param is
actually used (e.g. for installing with an external CA)
CAInstance.__spawn_instance() will configure the param to
point to the actual cert chain.
Signed-off-by: Endi Sukma Dewata <edewata@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
In the future the default value for pki_share_dbuser_dn might
change. To ensure that CA and KRA in IPA will use the same
database user, the pki_share_dbuser_dn needs to be defined
for CA to match the same param for KRA.
Signed-off-by: Endi Sukma Dewata <edewata@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The subsystem.count param has actually been removed since
PKI 10.10 so it doesn't need to be set in renew_ca_cert.in.
Signed-off-by: Endi Sukma Dewata <edewata@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When modifying ipa-epn code, a warning was issued:
--------------
Python 3.11.4 (main, Jun 7 2023, 00:00:00) [GCC 13.1.1 20230511 (Red Hat 13.1.1-2)]
************* Module ipaclient.install.ipa_epn
ipaclient/install/ipa_epn.py:89: [W0719(broad-exception-raised), drop_privileges] Raising too general exception: Exception)
--------------
Use 'RequiresRoot' exception class and clarify the message:
ipalib.errors.RequiresRoot: Cannot drop privileges!
Related: https://pagure.io/freeipa/issue/9425
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The following warning is displayed on a system running with Python 3.12:
-------------------
/usr/lib/python3.12/site-packages/ipalib/rpc.py:925: DeprecationWarning:
datetime.utcnow() is deprecated and scheduled for removal in a future
version. Use timezone-aware objects to represent datetimes in UTC:
datetime.now(datetime.UTC).
timestamp=datetime.datetime.utcnow())
-------------------
Fixes: https://pagure.io/freeipa/issue/9425
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
system date moved in order to expire the certs. Sometime it
is observed that subsequent operation fails with 500 error for CA,
hence restart the services after moving date and wait for sometime
to get things settle.
Also the tests was calling fixture which is not required for it, hence
removed it as well.
Fixes: https://pagure.io/freeipa/issue/9348
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The deletion of the admin is now forbidden (even if it is
not the last member of the admins group) and the error
message has changed from "admin cannot be deleted or
disabled because it is the last member of group admins"
to " user admin cannot be deleted/modified: privileged user".
Update the expected message in the webui test.
Related: https://pagure.io/freeipa/issue/8878
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
admin is required for trust operations
Note that testing for removing the last member is now
irrelevant because admin must always exist so the test
for it was removed, but the code check remains. It is done
after the protected member check.
Fixes: https://pagure.io/freeipa/issue/8878
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Use of 'ipa idp-add --provider' was supposed to allow override scope and
other IdP options. The defaults are provided by the IdP template and
were actually not overridden. Fix this.
Fixes: https://pagure.io/freeipa/issue/9421
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Adding proper error handling to the is_master_host() function to allow
it to make the difference between the absence of a master host object
and a connection failure. This will keep the krb5kdc daemon from
continuing to run with a NULL LDAP context.
Fixes: https://pagure.io/freeipa/issue/9422
Signed-off-by: Julien Rische <jrische@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Three memory leaks are addressed:
1. String values retrieved from the pblock need to be manually
freed.
2. The list of objectclasses retreived from the pblock need to be
freed.
3. Internal search results need to be freed.
Fixes: https://pagure.io/freeipa/issue/9403
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The test test_epn.py::TestEPN::test_EPN_config_file ensures that
/etc/ipa/epn.conf is installed and compares its checksum with an
expected value.
Commit fcad9c9 has changed the content of the file and the cksum
must be updated to reflect the new content.
Fixes: https://pagure.io/freeipa/issue/9419
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Adding mail_from_realname setting to configuration so that the real name of the sender of the password expiration notification can be customized. This addition does not affect existing configurations.
Fixes: https://pagure.io/freeipa/issue/9336
Signed-off-by: Simon Nussbaum <simon.nussbaum@adfinis.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The user and stageuser commands return the following error
when the user is created/updated with a non existing idp:
$ ipa user-add testuser --first test --last user --idp dummy
ipa: ERROR: no such entry
The error is not descriptive enough and has been modified to
display instead:
$ ipa user-add testuser --first test --last user --idp dummy
ipa: ERROR: External IdP configuration dummy not found
Fixes: https://pagure.io/freeipa/issue/9416
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
when system hardning done i.e in case of STIG, sometimes http challanges
can't be validated by CA if port 80 is not open. This fix enable it to facilitate
the communication.
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
When 389-ds process an OTP authentication, the ipa-pwd-extop
plugin reads a buffer to extract the authentication type.
The type is stored in an int but the data is a ber_tag_t.
On big endian machines the type cast does not cause any issue
but on s390x the buffer that should return 128 is seen as 0.
As a consequence, the plugin considers that the method is not
LDAP_AUTH_SIMPLE and exits early, without processing the OTP.
The fix is simple and consists in using the right type
(ber_tag_t is an unsigned long).
Fixes: https://pagure.io/freeipa/issue/9402
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The tasks.download_packages method is using
dnf install --downloaddir PATH --downloadonly
but the option --downloaddir does not exist any more with
dnf5 that is shipped in rawhide.
An alternative is to use
dnf download
which downloads to the current directory. This alternative
works for both dnf and dnf5.
Fixes: https://pagure.io/freeipa/issue/9399
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The test TestBackupAndRestoreWithReplica is simulating a
master crash in order to check the behavior after ipa-restore.
Since commit 67a33e5, the uninstaller restarts the services in
order to unregister the server from PKI security domain. An
indirect consequence is that master/replica communication is re-
established and operations removing entries (done by the uninstaller)
are replicated to the replica.
This means that the scenario does not really simulate a server crash.
To make sure that no replication happens during this "crash", stop
the replica first, then uninstall the master, and finally restart
the replica before calling the ipa-restore command on the master.
Fixes: https://pagure.io/freeipa/issue/9404
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
A host uses Location (nshostlocation) as an optional hint where
a host may phsyically be located (e.g. Lab 2). This will result in
an attribute in the host entry like:
nshostlocation: Lab 2
A server uses location (ipalocation) to identify which DNS location
the server is part of (e.g. prague). This will result in an attribute
in the server entry like:
ipalocation: idnsname=prague,cn=locations,cn=etc,dc=example,dc=test
They are completely different animals.
https://pagure.io/freeipa/issue/9317
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
In order to know if ca/kra is installed locally, the code
is calling pki-server subsystem-show _subsystem_
and ensures that "Enabled: True" is in the output.
If a subsystem fails to start, the command returns
"Enabled: False" but it doesn't mean that the subsystem
is not installed, it just means that it is not active
right now.
Same output if the subsystem has been disabled with
pki-server subsystem-disable _subsystem_.
The correct way to check if a subsystem is installed is to
ensure that subsystem-show does not exit on error and
contains "Enabled: ", whatever the value.
Related: https://pagure.io/freeipa/issue/9330
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The uninstaller is stopping all the services before
calling pkidestroy to uninstall the CA.
With PKI 11.4+ this sequence fails as pkidestroy tries
to connect to PKI server in order to unregister from the
security domain. The error interrupts the full completion
of pkidestroy, is logged but doesn't make ipa uninstallation
fail.
The issue is that trying to re-install later on would fail because
pkidestroy did not completely uninstall the CA.
To avoid this, call pkidestroy before shutting down the services.
Also add an uninstall_check method that restarts IPA if it is
not running, and use pkidestroy --force to make sure that PKI
is uninstalled even if restart failed.
Fixes: https://pagure.io/freeipa/issue/9330
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The upgrade checks the replication agreements to ensure that
some attributes are excluded from replication. The agreements
are stored in entries like
cn=serverToreplica,cn=replica,cn=_suffix_,cn=mapping tree,cn=config
but those entries are managed by the replication topology plugin
and should not be updated directly. The consequence is that the update
of the attributes fails and ipa-server-update prints an error message:
Error caught updating nsDS5ReplicatedAttributeList: Server is unwilling
to perform: Entry and attributes are managed by topology plugin.No direct
modifications allowed.
Error caught updating nsDS5ReplicatedAttributeListTotal: Server is
unwilling to perform: Entry and attributes are managed by topology
plugin.No direct modifications allowed.
The upgrade continues but the replication is not excluding
passwordgraceusertime.
Instead of editing the agreements, perform the modifications on
the topology segments.
Fixes: https://pagure.io/freeipa/issue/9385
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add an upgrade test with the following scenario:
- remove PKI drop-in file (to simulate an upgrade from an old
version)
- remove caECServerCertWithSCT profile from LDAP
- launch the ipa-server-upgrade command
- check that the upgrade added the file
Related: https://pagure.io/freeipa/issue/9381
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
During the installation of IPA server, the installer adds a drop-in
file in /etc/systemd/system/pki-tomcatd@pki-tomcat.service.d/ipa.conf
that ensures the CA is reachable before the start command returns.
If the file is missing (for instance because the server was installed
with an old version before this drop-in was created), the upgrade
should add the file.
Fixes: https://pagure.io/freeipa/issue/9381
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
There are 2 possible methods to rename users and groups:
- either use ipa user|group-mod oldname --rename newname
- or use settattr:
ipa user-mod oldname --setattr uid=newname
ipa group-mod oldname --setattr cn=newname
The first method validates the new name but the second method
doesn't. Add a validation to make both methods consistent
Fixes: https://pagure.io/freeipa/issue/9396
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
cert-find is a rather complex beast because it not only
looks for certificates in the optional CA but within the
IPA LDAP database as well. It has a process to deduplicate
the certificates since any PKI issued certificates will
also be associated with an IPA record.
In order to obtain the data to deduplicate the certificates
the cert from LDAP must be parser for issuer and serial number.
ipaldap has automation to determine the datatype of an
attribute and will use the ipalib.x509 IPACertificate class to
decode a certificate automatically if you access
entry['usercertificate'].
The downside is that this is comparatively slow. Here is the
parse time in microseconds:
cryptography 0.0081
OpenSSL.crypto 0.2271
ipalib.x509 2.6814
Since only issuer and subject are required there is no need to
make the expensive IPACertificate call.
The IPACertificate parsing time is fine if you're parsing one
certificate but if the LDAP search returns a lot of certificates,
say in the thousands, then those microseconds add up quickly.
In testing it took ~17 seconds to parse 5k certificates (excluding
transmission overhead, etc).
cert-find when there are a lot of certificates has been
historically slow. It isn't related to the CA which returns
large sets (well, 5k anyway) in a second or two. It was the
LDAP comparision adding tens of seconds to the runtime.
When searching with the default sizelimit of 100 the time is
~10s without this patch. With it the time is 1.5s.
CLI times from before and after searching for all certs:
original:
-------------------------------
Number of entries returned 5038
-------------------------------
real 0m15.507s
user 0m0.828s
sys 0m0.241s
using cryptography:
real 0m4.037s
user 0m0.816s
sys 0m0.193s
Fixes: https://pagure.io/freeipa/issue/9331
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This reverts commit 1f30cc6527.
The problem isn't with python-cryptography, it is with the
IPACertificate class which does way more work on a certificate
than is necessary in cert-find.
Related: https://pagure.io/freeipa/issue/9331
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This reverts commit 191880bc9f.
The problem isn't with python-cryptography, it is with the
IPACertificate class which does way more work on a certificate
than is necessary in cert-find.
Related: https://pagure.io/freeipa/issue/9331
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
SSSD already provides a config snippet which includes
SSSD_PUBCONF_KRB5_INCLUDE_D_DIR, and having both breaks Java.
Test checks that krb5.conf does not include
SSSD_PUBCONF_KRB5_INCLUDE_D_DIR.
Related: https://pagure.io/freeipa/issue/9267
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Without this the installation is successful but the DNS
records will not work. With --setup-dns there will be no
A record for the host (only an NS record) and the PTR record
will point to the domain name.
Fixes: https://pagure.io/freeipa/issue/9003
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The webui test test_service.py::test_service::test_arbitrary_certificates
randomly fails.
The test is creating a new service then navigates to the Service page
and clicks on the Add Certificate button.
The notification area may still be present and hide the button, with
the message "Service successfully added".
Close all notifications before navigating to the Service page.
Fixes: https://pagure.io/freeipa/issue/9389
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
test_smb is now successful because the windows server version
has been updated to windows-server-2022 with
- KB5012170
- KB5025230
- KB5022507
- servicing stack 10.0.20348.1663
in freeipa-pr-ci commit 3ba4151.
Remove the xfail.
Fixes: https://pagure.io/freeipa/issue/9124
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
MIT Kerberos KDC code will do verification of the PAC full checksum
buffers, we don't need to process them. This change only applies to
newer MIT Kerberos version which have this buffer type defined, hence
using #ifdef to protect the use of the define.
This should have no functional difference.
Related: https://pagure.io/freeipa/issue/9371
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Julien Rische <jrische@redhat.com>
Kerberos principal aliases lookup had a long-standing TODO item to
support server referrals for host-based aliases. This commit implements
server referrals for hosts belonging to trusted domains. The use-case is
a part of S4U processing in a two-way trust when an IPA service requests
a ticket to a host in a trusted domain (e.g. service on AD DC). In such
situation, the server principal in TGS request will be a normal principal
in our domain and KDC needs to respond with a server referral. This
referral can be issued by a KDB driver or by the KDC itself, using
'domain_realms' section of krb5.conf. Since KDB knows all suffixes
associated with the trusted domains, implement the logic there.
Fixes: https://pagure.io/freeipa/issue/9164
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Julien Rische <jrische@redhat.com>
Postpone ticket checksum configuration after KDB module was initialized.
This, in practice, should now happen when a master key is retrieved.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Julien Rische <jrische@redhat.com>
Early in startup LDAP server might not respond well yet and
should_support_pac_tkt_sign() will bail out with
KRB5_KDB_SERVER_INTERNAL_ERR. We should postpone this call but for time
being we should prevent a crash.
Crash happens because init_module() returns with an error and KDC then
calls fini_module() which will free the DB context which is already
corrupted for some reason.
Do not call any free() call because the whole context is corrupted as
tests do show.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Julien Rische <jrische@redhat.com>
From https://krbdev.mit.edu/rt/Ticket/Display.html?id=9089
--------
The KDC uses the first local TGT key for the privsvr and full PAC
checksums. If this key is of an aes-sha2 enctype in a cross-realm
TGT, a Microsoft KDC in the target realm may reject the ticket because
it has an unexpectedly large privsvr checksum buffer. This behavior
is unnecessarily picky as the target realm KDC cannot and does not
need to very the privsvr checksum, but [MS-PAC] 2.8.2 does limit the
checksum key to three specific enctypes.
--------
Use MIT Kerberos 1.21+ facility to hint about proper enctype for
cross-realm TGT.
Fixes: https://pagure.io/freeipa/issue/9124
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Julien Rische <jrische@redhat.com>
SSSD 2.9.0 provides support for passkey in rawhide.
Note that f37 and f38 ship 2.9.0 without the passkey feature
but this is not an issue as IPA has a "Recommends: sssd-passkey"
definition, not a "Requires:"
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
By setting passkey_child_debug_level in default.conf the debug level for
the passkey_child helper utility can be set.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The package sssd-passkey provides the executable
/usr/libexec/sssd/passkey_child
which is not mandatory but recommended.
Add a weak dependency from ipa client package on sssd-passkey.
TBD: when a new version of sssd is released with passkey
support, bump the SSSD version.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
SSSD ships passkey_child binary in /usr/libexec/sssd and
it needs the same security context as /usr/libexec/sssd/oidc_child
(ipa_otpd_exec_t type).
Add the context in the SELinux policy provided by IPA.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2169438
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Include changes related to passkey auth indicators.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
SSSD's command passkey_child was previously using stderr to
print the following messages:
PIN required.
Please touch the device.
but switched to stdout instead in the commit
https://github.com/SSSD/sssd/commit/6b0d175f8fad63c9c41e0b990c4a5632e96cc3f7
Stdout was used only for displaying the generated passkey.
This means that ipa user-add-passkey --register now must read
stdout line by line and print only the messages that the user
needs to see (all lines except the one containing the passkey).
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The passkey is a long string and not user-friendly.
Instead of showing the whole passkey in the webui, only show
the id part and a string for discoverable or server-side passkey.
Related: https://pagure.io/freeipa/issue/9261
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Apart from server-side credentials passkey should also register
discoverable credentials.
ipa user-add-passkey --register now supports an additional option,
--cred-type server-side|discoverable
that is propagated to passkey_child command.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
- added passkey detection based on the presence of ipaPassKey attribute
in the LDAP entry of the principal
- added 'passkey' authentication indicator
- added support for enforcing KDC policy based on the 'passkey'
indicator
Fixes: https://pagure.io/freeipa/issue/9263
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Add a new test ensuring that it is possible to modify
the krbt policy settings related to passkey authentication
(max life and max renew)
Related: https://pagure.io/freeipa/issue/9262
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Add new checkbox value "Passkey" for authentication type
(user page, config page)
Add new checkbox value "Passkey" for authentication indicator
(service page, host page)
Add new fields for Passkey krbptpolicy (max life, max renew)
Related: https://pagure.io/freeipa/issue/9262
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Add tests for the new passkey authentication type
(ipa user-*, ipa config-mod)
Add tests for the new passkey authentication indicator
(ipa service-*, ipa host-*)
Add tests for the new krbtpolicy parameters
(ipa krbtpolicy-mod --passkey-maxlife=INT --passkeymaxrenew=INT)
Related: ipatests/test_xmlrpc/test_user_plugin.py
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This condition was checked in group-add but not in group-mod.
This evaluation is done later in the pre_callback so that all
the other machinations about posix are already done to make
it easier to tell whether this condition is true or not.
Fixes: https://pagure.io/freeipa/issue/8990
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Only three remaining scripts used this form, two of which are
for developers only and not shipped.
The shebang in ipa-ccache-sweeper will be converted to
"#!$(PYTHON) -I" in the build process.
Fixes: https://pagure.io/freeipa/issue/8941
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
Update the rawhide Vagrant box to 0.8.3
(built May 26 2023 using fedora-39)
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The fixture issue_and_expire_acme_cert is changing the date
on master and client. It also resets the admin password as
it gets expired after the date change.
Currently the code is resetting the password by performing
kinit on the client, which leaves the master with an expired
ticket in its cache. Reset the password on the master instead
in order to have a valid ticket for the next operations.
Fixes: https://pagure.io/freeipa/issue/9383
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Commit f78dc0b163 was missing an exception for the constrained
delegation ACL TL data type during the principal entry update operation.
This ACL is not meant to be stored as encoded data in krbExtraData.
Signed-off-by: Julien Rische <jrische@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Since November 2020, Active Directory KDC generates a new type of
signature as part of the PAC. It is called "ticket signature", and is
generated based on the encrypted part of the ticket. The presence of
this signature is not mandatory in order for the PAC to be accepted for
S4U requests.
However, the behavior is different for MIT krb5. Support was added as
part of the 1.20 release, and this signature is required in order to
process S4U requests. Contrary to the PAC extended KDC signature, the
code generating this signature cannot be isolated and backported to
older krb5 versions because this version of the KDB API does not allow
passing the content of the ticket's encrypted part to IPA.
This is an issue in gradual upgrade scenarios where some IPA servers
rely on 1.19 and older versions of MIT krb5, while others use version
1.20 or newer. A service ticket that was provided by 1.19- IPA KDC will
be rejected when used by a service against a 1.20+ IPA KDC for S4U
requests.
On Fedora, CentOS 9 Stream, and RHEL 9, when the krb5 version is 1.20 or
newer, it will include a downstream-only update adding the
"optional_pac_tkt_chksum" KDB string attribute allowing to tolerate the
absence of PAC ticket signatures, if necessary.
This commit adds an extra step during the installation and update
processes where it adds a "pacTktSignSupported" ipaConfigString
attribute in "cn=KDC,cn=[server],cn=masters,cn=ipa,cn=etc,[basedn]" if
the MIT krb5 version IPA what built with was 1.20 or newer.
This commit also set "optional_pac_tkt_chksum" as a virtual KDB entry
attribute. This means the value of the attribute is not actually stored
in the database (to avoid race conditions), but its value is determined
at the KDC starting time by search the "pacTktSignSupported"
ipaConfigString in the server list. If this value is missing for at
least of them is missing, enforcement of the PAC ticket signature is
disabled by setting "optional_pac_tkt_chksum" to true for the local
realm TGS KDB entry.
For foreign realm TGS KDB entries, the "optional_pac_tkt_chksum" virtual
string attribute is set to true systematically, because, at least for
now, trusted AD domains can still have PAC ticket signature support
disabled.
Given the fact the "pacTktSignSupported" ipaConfigString for a single
server is added when this server is updated, and that the value of
"optional_pac_tkt_chksum" is determined at KDC starting time based on
the ipaConfigString attributes of all the KDCs in the domain, this
requires to restart all the KDCs in the domain after all IPA servers
were updated in order for PAC ticket signature enforcement to actually
take effect.
Fixes: https://pagure.io/freeipa/issue/9371
Signed-off-by: Julien Rische <jrische@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
In November 2022, Microsoft introduced a new PAC signature type called
"extended KDC signature" (or "full PAC checksum"). This new PAC
signature will be required by default by Active Directory in July 2023
for S4U requests, and opt-out will no longer be possible after October
2023.
Support for this new signature type was added to MIT krb5, but it relies
on the new KDB API introduced in krb5 1.20. For older MIT krb5 versions,
the code generating extended KDC signatures cannot be backported as it
is without backporting the full new KDB API code too. This would have
too much impact to be done.
As a consequence, krb5 packages for Fedora 37, CentOS 8 Stream, and RHEL
8 will include a downstream-only update adding the
krb5_pac_full_sign_compat() function, which can be used in combination
with the prior to 1.20 KDB API to generate PAC extended KDC signatures.
Fixes: https://pagure.io/freeipa/issue/9373
Signed-off-by: Julien Rische <jrische@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
fontawesome 6.x is not entirely compatible with 4.x version but in
Fedora the change was made to make 4.x bits FreeIPA depends on to be
forward-ported to 6.x build. This also allows to have common dependency
for all versions.
This patch switches to the common dependency using 'fonts(fontawesome)'.
This works on all Fedora and RHEL versions.
Signed-off-by: Jerry James <loganjerry@gmail.com>
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The commands ipa user-add or ipa group-add validate the
format of the user/group name and display the following
message when it does not conform to the expectations:
invalid 'login': may only include letters, numbers, _, -, . and $
The format is more complex, for instance '1234567' is an invalid
user name but the failure is inconsistent with the error message.
Modify the error message to point to ipa help user/group and add
more details in the help message.
Same change for idoverrideuser and idoverridegroup:
The user/group name must follow these rules:
- cannot contain only numbers
- must start with a letter, a number, _ or .
- may contain letters, numbers, _, ., or -
- may end with a letter, a number, _, ., - or $
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2150217
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
In order to expire the ACME cert, system is moved and while
issuing the kinit command, results into failure.
Hence run kinit command repeatedly untill things get settle.
This patch removes the sleep and adds tasks.run_repeatedly()
method instead.
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
If a cert-find fails on the CA side we get a Message tag
containing a string describing the failure plus the java stack
trace. Pull out the first part of the message as defined by the
first colon and include that in the error message returned to
the user.
The new message will appear as:
$ ipa cert-find
ipa: ERROR: Certificate operation cannot be completed: Unable to search for certificates (500)
vs the old generic message:
ipa: ERROR: Certificate operation cannot be completed: Unable to communicate with CMS (500)
This can be reproduced by setting nssizelimit to 100 on the
pkidbuser. The internal PKI search returns err=4 but the CA
tries to convert all values into certificates and it fails. The
value needs to be high enough that the CA can start but low
enough that you don't have to create hundreds of certificates
to demonstrate the issue.
https://pagure.io/freeipa/issue/9369
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Previous test to test_ssh_key_connection is calling ipa-server-upgrade command,
which restarts all the associated services.
Especially on slower machine, SSSD is not yet online when the SSH connection is attempted.
This results to only cached users being available.
Wait for SSSD to become available before the SSH connection is attempted.
Fixes: https://pagure.io/freeipa/issue/9377
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Julien Rische <jrische@redhat.com>
Fedora 38 is now available, move the testing pipelines to
- fedora 38 for the _latest definitions
- fedora 37 for the _previous definitions
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The command ipa idview-show NAME has a post callback
method that replaces the ID override anchor with the corresponding
user name.
For instance the anchor
ipaanchoruuid=:SID:S-1-5-21-3951964782-819614989-3867706637-1114
is replaced with the name of the ad user aduser@ad.test.
The method loops on all the anchors and for each one performs the
resolution, which can be a costly operation if the anchor is for
a trusted user. Instead of doing a search for each anchor, it is
possible to read the 'ipaOriginalUid' value from the ID override
entry.
Fixes: https://pagure.io/freeipa/issue/9372
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
On fedora < 39, nodejs 20 is not the default version. As
a consequence, the installation of nodejs20 adds the command
/usr/bin/node-20 instead of /usr/bin/node.
FreeIPA build is using the node command and fails if the
command is missing.
Force nodejs < 20 on fedora < 39 to make sure the node
command is installed.
Fixes: https://pagure.io/freeipa/issue/9374
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The test test_ipahealthcheck.py::TestIpaHealthcheck frequently
hits its 90min timeout. Extend by 15min to allow completion.
Fixes: https://pagure.io/freeipa/issue/9362
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
When ipa cert-find --all is called, the function prints the
certificate public bytes. The code recently switched to OpenSSL.crypto
and the objects OpenSSL.crypto.X509 do not have the method
public_bytes(). Use to_cryptography() to transform into a
cryptography.x509.Certificate before calling public_bytes().
Related: https://pagure.io/freeipa/issue/9331
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
cert-find is a rather complex beast because it not only
looks for certificates in the optional CA but within the
IPA LDAP database as well. It has a process to deduplicate
the certificates since any PKI issued certificates will
also be associated with an IPA record.
In order to obtain the data to deduplicate the certificates
the cert from LDAP must be parser for issuer and serial number.
ipaldap has automation to determine the datatype of an
attribute and will use the python-cryptography engine to
decode a certificate automatically if you access
entry['usercertificate'].
The downside is that this is comparatively slow. Here is the
parse time in microseconds:
OpenSSL.crypto 175
pyasn1 1010
python-cryptography 3136
The python-cryptography time is fine if you're parsing one
certificate but if the LDAP search returns a lot of certificates,
say in the thousands, then those microseconds add up quickly.
In testing it took ~17 seconds to parse 5k certificates.
It's hard to overstate just how much better the cryptography
Python interface is. In the case of OpenSSL really the only
certificate fields easily available are serial number, subject
and issuer. And the subject/issuer are in the OpenSSL reverse
format which doesn't compare nicely to the cryptography format.
The DN module can correct this.
Fortunately for cert-find we only need serial number and issuer,
so the OpenSSL module fine. It takes ~2 seconds.
pyasn1 is also relatively faster but switch to it would require
subtantially more effort for less payback.
cert-find when there are a lot of certificates has been
historically slow. It isn't related to the CA which returns
large sets (well, 5k anyway) in a second or two. It was the
LDAP comparision adding tens of seconds to the runtime.
CLI times from before and after:
original:
-------------------------------
Number of entries returned 5011
-------------------------------
real 0m21.155s
user 0m0.835s
sys 0m0.159s
using OpenSSL:
real 0m5.747s
user 0m0.864s
sys 0m0.148s
OpenSSL is forcibly lazy-loaded so it doesn't conflict with
python-requests. See ipaserver/wsgi.py for the gory details.
Fixes: https://pagure.io/freeipa/issue/9331
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Antonio Torres <antorres@redhat.com>
The sizelimit option was not being passed into the dogtag
ra_find() command so it always returned all available certificates.
A value of 0 will retain old behavior and return all certificates.
The default value is the LDAP searchsizelimit.
Related: https://pagure.io/freeipa/issue/9331
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Antonio Torres <antorres@redhat.com>
Send stderr of pkgconf to /dev/null rather than printing the following
error text while parsing the spec file:
Package krb5 was not found in the pkg-config search path.
Perhaps you should add the directory containing `krb5.pc'
to the PKG_CONFIG_PATH environment variable
Package 'krb5', required by 'virtual:world', not found
`BuildRequires: pkgconfig(krb5)` ensures this won't happen when running
a real build. It simply avoids 4 lines of needless error output when
running something like `fedpkg prep`.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
DS does not enable plugins unless nsslapd-dynamic-plugins is enabled or
DS is restarted. The DNA plugin creates its configuration entries with
some delay after the plugin is enabled.
DS is now restarted after the DNA plugin is enabled so it can create the
entries while Dogtag and the rest of the system is installing. The
updater `update_dna_shared_config` no longer blocks and waits for two
times 60 seconds for `posix-ids` and `subordinate-ids`.
Fixes: https://pagure.io/freeipa/issue/9358
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Two tests have known issues in test_trust.py with sssd 2.8.2+:
- TestNonPosixAutoPrivateGroup::test_idoverride_with_auto_private_group
(when called with the "hybrid" parameter)
- TestPosixAutoPrivateGroup::test_only_uid_number_auto_private_group_default
(when called with the "true" parameter)
Related: https://pagure.io/freeipa/issue/9295
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
1 : Test to verify that groups have correct userclass when
external is set to true or false with group-add.
2 : After creating a nonposix group verify that all
following group_add calls to add posix groups calls are
not failing with missing attribute.
Related: https://pagure.io/freeipa/issue/9349
Signed-off-by: mbhalodi <mbhalodi@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Antonio Torres <antorres@redhat.com>
This includes:
* Section about command/param info in usage guide
* Section about metadata retrieval in usage guide
* Guide about differences between CLI and API
* Access control guide (management of roles, privileges and
permissions).
* Guide about API contexts
* JSON-RPC usage guide and JSON-to-Python conversion
* Notes about types in API Reference
Signed-off-by: Antonio Torres <antorres@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add a test that uses IPA API to allow delegation of RBCD configuration
to a host and then use it to set up RBCD rule for a service.
Run RBCD check when the rule exists and when the rule is removed.
Since we only provide RBCD support on KDC side with Kerberos 1.20, skip
the test on Fedora versions prior to Fedora 38 and on RHEL versions
prior to RHEL 9.2.
Fixes: https://pagure.io/freeipa/issue/9354
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Resource-based constrained delegation (RBCD) is implemented with a new
callback used by the KDC. This callback is called when a server asks for
S4U2Proxy TGS request and passes a ticket that contains RBCD PAC
options.
The callback is supposed to take a client and a server principals, a PAC and a target
service database entry. Using the target service database entry it then
needs to decide whether a server principal is allowed to delegate the
client credentials to the target service.
The callback can also cross-check whether the client principal can be
limited in delegating own tickets but this is not implemented in the
current version.
Fixes: https://pagure.io/freeipa/issue/9354
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
FreeIPA Kerberos implementation already supports delegation of
credentails, both unconstrained and constrained. Constrained delegation
is an extension developed by Microsoft and documented in MS-SFU
specification. MS-SFU specification also includes resource-based
constrained delegation (RBCD) which FreeIPA did not support.
Microsoft has decided to force use of RBCD for forest trust. This means
that certain use-cases will not be possible anymore.
This design document outlines approaches used by FreeIPA for constrained
delegation implementation, including RBCD.
Fixes: https://pagure.io/freeipa/issue/9354
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Confine search for S4U2Proxy access control lists to the subtree where
they created. This will allow to use a similar method to describe RBCD
access controls.
Related: https://pagure.io/freeipa/issue/5444
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Another change in automember plugin messaging that breaks FreeIPA tests.
Use common substring to match.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
bind-dyndb-ldap on Debian installs ldap.so in a subdirectory of
/usr/lib to prevent unintentional usage of an unversioned .so.
The default settings for FreeIPA on Debian used an incomplete
path, resulting in a failure to find ldap.so when bind attempts to
start with bind-dyndb-ldap configured.
This fixes the default path to use the appropriate location in its
multiarch-qualified path.
Signed-off-by: Jarl Gullberg <jarl.gullberg@gmail.com>
Reviewed-By: Timo Aaltonen <tjaalton@ubuntu.com>
bind-dyndb-ldap uses the krb5_keytab directive to set the path to
the keytab to use. This directive was not being used in the
configuration template, resulting in a failure to start named if
the keytab path differed from the defaults.
This issue was discovered when packaging FreeIPA for Debian,
which is one of the platforms where the path is customized.
Signed-off-by: Jarl Gullberg <jarl.gullberg@gmail.com>
Fixes: https://pagure.io/freeipa/issue/9344
Reviewed-By: Timo Aaltonen <tjaalton@ubuntu.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The notes that Param pages will contain after #6733 are added manually,
and because of it we need to add markers to differentiate between
automated and manual content, equal to what we do for class pages.
Signed-off-by: Antonio Torres <antorres@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
`printf` ignores excessive arguments unused in formatting.
This resulted in only the first file from two file lists was
linted/ stylechecked if both Python template files and Python
modules were changed.
Make use of formatting instead:
> The format is reused as necessary to consume all of the arguments
Fixes: https://pagure.io/freeipa/issue/9318
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
We need to deepcopy the list of default objectlasses from IPA config
before assigning it to an entry, in order to avoid further modifications of the
entry affect the cached IPA config.
Fixes: https://pagure.io/freeipa/issue/9349
Signed-off-by: Antonio Torres <antorres@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Testing if manager whose rights defined by the group membership
is able to add group members, after upgrade of ipa server.
Using ACI modification to demonstrate unability before upgrading
ipa server.
Related: https://pagure.io/freeipa/issue/9286
Also added some generally helpful functions to tasks.py
Signed-off-by: Erik Belko <ebelko@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
The automembership fixup task now needs to be called
with --cleanup argument when the user expects automember
to remove user/hosts from automember groups.
Update the test to call create a cleanup task equivalent to
dsconf plugin automember fixup --cleanup
when it is needed.
Fixes: https://pagure.io/freeipa/issue/9313
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When you run "ipa idp-show <idp reference>" the IdP reference is shown
as "Identity Provider server name". This is confusing as we are pointing
to the earlier created IdP reference rather than a server. Other files
are updated as well to reflect this change.
Additionally some typos are fixed with this patch too.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Installation of ipa-client with PKINIT authentication can block when
there is a problem with PKINIT, e.g. KDC does not accept the cert or the
anchor chain is incomplete. `kinit` falls back to password
authentication and asks the user to enter a password.
`kinit` does not have an option to force non-interactive mode. Sending
`\n` to stdin seems to be the only solution here.
Fixes: https://pagure.io/freeipa/issue/9333
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The test test_integration/test_acme.py times out frequently
and has a current timeout set to 2h, which is roughly
the average time for a successful run.
Increase by 15 minutes, so that even the tests requiring
packages update have enough time (for instance rawhide
run needs to update all the packages to the latest version).
Also create a separate job for the new test TestACMEPrune.
Fixes: https://pagure.io/freeipa/issue/9324
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When cron_minute + 5 > 59, cron job throwing error for it.
i.e 58 + 5 = 63 which is not acceptable value for cron minute.
Second fix is related to mismatch of confing setting and corresponding
assert.
Third fix is related to extending time by 60 minutes to properly
expire the certs.
related: https://pagure.io/freeipa/issue/9294
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Instead of passing TRUE/FALSE to a single --enable option
use two flags instead, which IMHO is clearer.
So --enable=TRUE to --enable and --enable=FALSE to --disable
Fixes: https://pagure.io/freeipa/issue/9323
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
This document showcases common usecases for the user to
interact with the PR-CI checker tool.
Signed-off-by: David Pascual <davherna@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
webui unit tests fail with grunt-contrib-qunit:
```
Testing test/all_tests.html
>> Error: Error: QUnit has already been defined.
>> at exportQUnit (file:///home/test/freeipa/install/ui/js/qunit.js:2475:12)
>> at file:///home/test/freeipa/install/ui/js/qunit.js:2946:3
>> at file:///home/test/freeipa/install/ui/js/qunit.js:5061:2
>> Error: TypeError: Cannot set properties of undefined (setting 'reorder')
>> at <anonymous>:175:24
>> at runFactory (file:///home/test/freeipa/install/ui/js/dojo/dojo.js:1:17157)
>> at execModule (file:///home/test/freeipa/install/ui/js/dojo/dojo.js:1:19541)
>> at file:///home/test/freeipa/install/ui/js/dojo/dojo.js:1:20002
>> at guardCheckComplete (file:///home/test/freeipa/install/ui/js/dojo/dojo.js:1:19707)
>> at checkComplete (file:///home/test/freeipa/install/ui/js/dojo/dojo.js:1:19854)
>> at onLoadCallback (file:///home/test/freeipa/install/ui/js/dojo/dojo.js:1:22296)
>> at HTMLScriptElement.onLoad (file:///home/test/freeipa/install/ui/js/dojo/dojo.js:1:26209)
```
Load `qunit` with `dojo.require` that among other useful things helps
> Preventing loading Dojo packages twice.
dojo.require will simply return if the package is already loaded.
See also https://github.com/gruntjs/grunt-contrib-qunit#loading-qunit-with-amd
Related: https://pagure.io/freeipa/issue/9329
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
https://peter.sh/experiments/chromium-command-line-switches/#allow-file-access-from-files
> By default, file:// URIs cannot read other file:// URIs. This is an
override for developers who need the old behavior for testing.
Fixes webui tests on CI:
```
Testing test/all_tests.html
Synchronous XMLHttpRequest on the main thread is deprecated because of its detrimental effects to the end user's experience. For more help, check https://xhr.spec.whatwg.org/.
Access to XMLHttpRequest at 'file:///__w/freeipa/freeipa/install/ui/test/qunit.js' from origin 'null' has been blocked by CORS policy: Cross origin requests are only supported for protocol schemes: http, data, chrome, chrome-untrusted, https.
Failed to load resource: net::ERR_FAILED
Access to XMLHttpRequest at 'file:///__w/freeipa/freeipa/install/ui/test/data/i18n_messages.json' from origin 'null' has been blocked by CORS policy: Cross origin requests are only supported for protocol schemes: http, data, chrome, chrome-untrusted, https.
Failed to load resource: net::ERR_FAILED
>> Error: Error: Couldn't receive translations
```
Related: https://pagure.io/freeipa/issue/9329
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
test_integration/test_trust.py is divided into two parts.
1: class TestTrust
2: class TestNonPosixAutoPrivateGroup, class TestPosixAutoPrivateGroup
Fixes: https://pagure.io/freeipa/issue/9326
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
1. Test to prune the expired certificate by manual run
2. Test to prune expired certificate by cron job
3. Test to prune expired certificate with retention unit option
4. Test to prune expired certificate with search size limit option
5. Test to check config-show command shows set param
6. Test prune command shows proper status after disabling the pruning
related: https://pagure.io/freeipa/issue/9294
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When PAC check is performed, we might get a signing TGT instead of the
client DB entry. This means it is a principal from a trusted domain but
we don't know which one exactly because we only have a krbtgt for the
forest root. This happens in MIT Kerberos 1.20 or later where KDB's
issue_pac() callback never gets the original client principal directly.
Look into known child domains as well and make pass the check if both
NetBIOS name and SID correspond to one of the trusted domains under this
forest root. Move check for the SID before NetBIOS name check because we
can use SID of the domain in PAC to find out the right child domain in
our trusted domains' topology list.
Fixes: https://pagure.io/freeipa/issue/9316
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
If a server with a CA has been marked as hidden and
contains the last A or AAAA address then that address
would remain in the ipa-ca entry.
This is because update-dns-system-records did not delete
values, it just re-computed them. So if no A or AAAA
records were found then the existing value was left.
Fixes: https://pagure.io/freeipa/issue/9195
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Replace comparisons of "if value" with "if value is not None"
in order to handle 0.
Add a short reference to the man page to indicat that a cert
or request retention time of 0 means remove at the next
execution.
Also indicate that the search time limit is in seconds.
Fixes: https://pagure.io/freeipa/issue/9325
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Renewal causes two certs to have the same nickname. Dogtag is
patched to allow for N certs with the same nickname, and this test
is to verify that CADogtagCertsConfigCheck still passes.
Related: https://github.com/dogtagpki/pki/pull/4285
Signed-off-by: Chris Kelley <ckelley@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Include guides with examples for groups, HBAC and sudo rules management.
These cover most of available commands related to these topics.
Signed-off-by: Antonio Torres <antorres@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
As discussed in PR #6664, `ipa show-mappings` can be used as a handy way to list
command arguments and options directly through the CLI.
Signed-off-by: Antonio Torres <antorres@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This test is located outside of the TestACMEPrune because
it enables RSNv3 while the server installed by TestACME doesn't.
It still needs a wrapper to enforce a version of PKI that
supports pruning because that is checked first in the tool.
Re-ordering that wouldn't be a good user experience.
https://pagure.io/freeipa/issue/9322
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Fix 1: timeout field was being checked twice and did not return fail code on error
Fix 2: Tool did not return error code on single file check unsuccessful run
Signed-off-by: David Pascual <davherna@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
A manual method was mentioned with no specificity. Include
the --run command. Also update the troubleshooting section
to show what failure to restart the CA after configuration
looks like.
Import the IPA CA chain for manual execution.
Also fix up some $ -> # to indicate root is needed.
Related: https://pagure.io/freeipa/issue/9294
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Configures PKI to remove expired certificates and non-resolved
requests on a schedule.
This is geared towards ACME which can generate a lot of certificates
over a short period of time but is general purpose. It lives in
ipa-acme-manage because that is the primary reason for including it.
Random Serial Numbers v3 must be enabled for this to work.
Enabling pruning enables the job scheduler within CS and sets the
job user as the IPA RA user which has full rights to certificates
and requests.
Disabling pruning does not disable the job scheduler because the
tool is stateless. Having the scheduler enabled should not be a
problem.
A restart of PKI is required to apply any changes. This tool forks
out to pki-server which does direct writes to CS.cfg. It might
be easier to use our own tooling for this but this makes the
integration tighter so we pick up any improvements in PKI.
The "cron" setting is quite limited, taking only integer values
and *. It does not accept ranges, either - or /.
No error checking is done in PKI when setting a value, only when
attempting to use it, so some rudimentary validation is done.
Fixes: https://pagure.io/freeipa/issue/9294
Signed-off-by: Rob Crittenden rcritten@redhat.com
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The automember-rebuild task may require high CPU usage
if many users/hosts/groups are processed.
Add a note in the ipa automember-rebuild CLI output
and in the WebUI confirmation message.
Fixes: https://pagure.io/freeipa/issue/9320
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Avoid reading platform specific `/etc/resolv.conf` in `TestDNSResolver`
unit tests. Systems (e.g. sandboxes) may not have `/etc/resolv.conf`
or this file may not contain any configured name servers.
`TestDNSResolver` unit tests check only customized `nameservers`
property and should not depend on existence of `/etc/resolv.conf`.
Resolver accepts `configure` option.
https://dnspython.readthedocs.io/en/latest/resolver-class.html :
> configure, a bool. If True (the default), the resolver instance is
configured in the normal fashion for the operating system the resolver
is running on. (I.e. by reading a /etc/resolv.conf file on POSIX
systems and from the registry on Windows systems.)
Fixes: https://pagure.io/freeipa/issue/9319
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
freeipa-healthcheck changed some messages related to ipa-ca
DNS record validation in IPADNSSystemRecordsCheck. Include support
for it and retain backwards compatibility.
Fixes: https://pagure.io/freeipa/issue/9291
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
freeipa-healthcheck 0.12 includes a SUCCESS message if the
ipa-ca records are as expected so a user will know they
were checked. For that version and beyond test that it
is included.
Related: https://pagure.io/freeipa/issue/9291
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
When ipa trust-add is executed with --range-type ad-trust-posix,
the server tries to find the max uidnumber and max gidnumber
from AD domain controller.
The values are extracted from the entry
CN=<domain>,CN=ypservers,CN=ypServ30,CN=RpcServices,CN=System,<AD suffix>
in the msSFU30MaxUidNumber and msSFU30MaxGidNumber attributes.
msSFU30MaxUidNumber is required but not msSFU30MaxGidNumber.
In case msSFU30MaxGidNumber is missing, the code is currently assigning
a "None" value and later on evaluates the max between this value and
msSFU30MaxUidNumber. The max function cannot compare None and a list
of string and triggers an exception.
To avoid the exception, assign [b'0'] to max gid if msSFU30MaxGidNumber
is missing. This way, the comparison succeeds and max returns the
value from msSFU30MaxUidNumber.
Fixes: https://pagure.io/freeipa/issue/9310
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This change fixes rpminspect issues reported when building
for RHEL, like the following one:
Patch number 1001 (1001-Change-branding-to-IPA-and-Identity-Management.patch)
is missing a corresponding %patch1001 macro, usually in %prep.
Waiver Authorization: Anyone
Suggested Remedy:
The named patch is defined in the source RPM header (this means it has a
PatchN: definition in the spec file) but is not applied anywhere in the
spec file. It is missing a corresponding %patch macro and the spec file
lacks the %autosetup or %autopatch macros. You can fix this by adding
the appropriate %patch macro in the spec file (usually in the %prep
section). The number specified with the %patch macro corresponds to the
number used to define the patch at the top of the spec file. So Patch47
is applied with a %patch47 macro.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Extend 'makeapi --validate' to validate API Reference files too. If
differences are found between the generated and stored docs the
validation fails. This command is executed in our Azure pipelines, so
every time a developer opens a PR but forgets to update the API
Reference, the CI will fail.
Fixes: https://pagure.io/freeipa/issue/9287
Signed-off-by: Antonio Torres <antorres@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Replaced URL in Markdown Format with the proper reStructuredText markup
in file doc/workshop/12-external-idp-support.rst
Signed-off-by: Lenz Grimmer <lenz.grimmer@percona.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The installer is currently creating the samba domain object
before it adds the RID base and secondary RID base. As a consequence,
there is a window during which the sidgen plugin is active but
unable to generate SIDs (it requires the samba domain object to
find the domain SID and RID base to know where to start from).
There is no direct impact except the error log of 389ds that reports
ERR - get_ranges - [file ipa_sidgen_common.c, line 276]: Failed to convert LDAP entry to range struct.
This fix configures the RID base and secondary RID base before the
domain object is created, thus removing this window.
Fixes: https://pagure.io/freeipa/issue/9309
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
PKI can issue ACME certs only when the key type is rsa.
With version 2.0.0, certbot defaults to ecdsa key type,
and this causes test failures.
For now, force rsa when requesting an ACME certificate.
This change can be reverted when PKI fixes the issue
on their side (https://github.com/dogtagpki/pki/issues/4273)
Related: https://pagure.io/freeipa/issue/9298
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The client installer code can be called in 3 different ways:
- from ipa-client-install CLI
- from ipa-replica-install CLI if the client is not already installed
- from ipa-server-install
In the last case, the client installer is called with
options.on_master=True
As a result, it's skipping the part that is creating the krb5
configuration:
if not options.on_master:
nolog = tuple()
configure_krb5_conf(...)
The configure_krb5_conf method is the place where the krb5.conf file is
backup'ed with the extention ".ipabkp". For a master installation, this
code is not called and the ipabkp file does not exist => delete raises
an error.
When delete fails because the file does not exist, no need to log an
error message.
Fixes: https://pagure.io/freeipa/issue/9306
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
https://pylint.pycqa.org/en/latest/user_guide/messages/convention/unnecessary-lambda-assignment.html:
> Used when a lambda expression is assigned to variable rather than
defining a standard function with the "def" keyword.
https://peps.python.org/pep-0008/#programming-recommendations:
> Always use a def statement instead of an assignment statement that
binds a lambda expression directly to an identifier:
def f(x): return 2*x
f = lambda x: 2*x
The first form means that the name of the resulting function object is
specifically ‘f’ instead of the generic ‘<lambda>’. This is more useful
for tracebacks and string representations in general. The use of the
assignment statement eliminates the sole benefit a lambda expression can
offer over an explicit def statement (i.e. that it can be embedded
inside a larger expression)
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
> Emitted when a local variable is accessed before its assignment took
place. Assignments in try blocks are assumed not to have occurred when
evaluating associated except/finally blocks. Assignments in except
blocks are assumed not to have occurred when evaluating statements
outside the block, except when the associated try block contains a
return statement.
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Fixes:
```
[E0611(no-name-in-module), ] No name 'parse' in module 'lxml.etree'
[E0611(no-name-in-module), ] No name 'murmurhash3' in module 'pysss_murmur'
```
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
PEP 632 deprecates the distutils module. Replace
- distutils.spawn.find_executable with shutil.which
- distutils.log with logging
Related: https://pagure.io/freeipa/issue/9278
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
The newer version of pylint has fixed false positives and
does not need anymore these suppressions:
- global-variable-not-assigned
- invalid-sequence-index
- no-name-in-module
- not-callable
- unsupported-assignment-operation
Related: https://pagure.io/freeipa/issue/9278
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
The config file /var/kerberos/krb5kdc/kdc.conf is customized
during IPA server installation with a list of supported
encryption types.
In FIPS mode, camellia encryption is not supported and should
be filtered out. Because of a typo in the filtering method,
the camellia encryptions are appended while they should not.
Fix the typo (camelia vs camellia) in order to filter properly.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The PKCS12 MAC requires PKCS12KDF which is not an approved FIPS
algorithm and cannot be supported by the FIPS provider.
Do not require mac verification in FIPS mode: append the option
--nomacver to the command openssl pkcs12 used to extract a pem file
or a key from a p12 file.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The test ipatests/test_integration/test_fips.py is faking
FIPS mode and calls "openssl md5" to ensure the algo is
not available in the fake FIPS mode.
The error message has been updated with openssl-3.0.5-5.
In the past the command used to return:
$ openssl md5 /dev/null
Error setting digest
140640350118336:error:060800C8:digital envelope routines:EVP_DigestInit_ex:disabled for FIPS:crypto/evp/digest.c:147:
And now it returns:
$ openssl md5 /dev/null
Error setting digest
00C224822E7F0000:error:0308010C:digital envelope routines:inner_evp_generic_fetch:unsupported:crypto/evp/evp_fetch.c:349:Global default library context, Algorithm (MD5 : 97), Properties ()
00C224822E7F0000:error:03000086:digital envelope routines:evp_md_init_internal:initialization error:crypto/evp/digest.c:252:
To be compatible with all versions, only check the common part:
Error setting digest
Mark the test as xfail since installation is currently not working.
Related: https://pagure.io/freeipa/issue/9002
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Now that ipa-client-installs supports pkinit, the package
depends on krb5-pkinit-openssl.
Update the spec file, move the dependency from ipa-server
to ipa-client subpackage.
Fixes: https://pagure.io/freeipa/issue/9290
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Add basic user management guide that includes various examples on
performing common tasks related to the user module, such as adding an
user, modifying it, adding certificates for it, etc.
Signed-off-by: Antonio Torres <antorres@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The test wants to check the error related to an
exception obtained inside a "with pytest.raises" instruction.
The object is an ExceptionInfo and offers a match method
to check the content of the string representation.
Use this match() method instead of str(excinfo) which now
returns
'<ExceptionInfo NoSuchElementException() tblen=10>'
Fixes: https://pagure.io/freeipa/issue/9282
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
The original implementation of the member manager added support for both
user and group managers but left out upgrade scenario. This means when
upgrading existing installation a manager whose rights defined by the
group membership would not be able to add group members until the ACI is
fixed.
Remove old ACI and add a full one during upgrade step.
Fixes: https://pagure.io/freeipa/issue/9286
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Update doc/api/vault_archive_internal.md and
doc/api/vault_retrieve_internal.md
after the change from commit 93548f2
(default wrapping algo is now des-ede3-cbc instead of aes-128-cbc).
Related: https://pagure.io/freeipa/issue/9259
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The IPA location system relies on DNS record priorities in order to give
higher precedence to servers from the same location. For Kerberos, this
is done by redirecting generic SRV records (e.g.
_kerberos._udp.[domain].) to location-aware records (e.g.
_kerberos._udp.[location]._locations.[domain].) using CNAMEs.
This commit applies the same logic for URI records. URI location-aware
record were created, but there were no redirection from generic URI
records. It was causing them to be ignored in practice.
Kerberos URI and TXT records have the same name: "_kerberos". However,
CNAME records cannot coexist with any other record type. To avoid this
conflict, the generic TXT realm record was replaced by location-aware
records, even if the content of these records is the same for all
locations.
Fixes: https://pagure.io/freeipa/issue/9257
Signed-off-by: Julien Rische <jrische@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The tests calling sssctl domain-status were marked xfail
because of SSSD issue #6331. Now that the issue is fixed
and freeipa bumped sssd required version, remove the xfail
annotation.
Related: https://pagure.io/freeipa/issue/9234
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Bump sssd version to 2.8.0 on fedora37+ and RHEL
to ensure the fix for SSSD #6631 is present.
No need to bump the version on fedora 36 as the issue
is not seen on versions < 37.
Fixes: https://pagure.io/freeipa/issue/9234
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
AES-128-CBC was recently enabled as default wrapping algorithm for transport of secrets.
This change was done in favor of FIPS as crypto-policies disabled 3DES in RHEL9, but
setting AES as default ended-up breaking backwards compatibility with older RHEL systems.
This commit is tuning some defaults so that interoperability with older RHEL systems
works again. The new logic reflects:
- when an old client is calling a new server, it doesn't send any value for wrapping_algo
and the old value is used (3DES), so that the client can decrypt using 3DES.
- when a new client is calling a new server, it sends wrapping_algo = AES128_CBC
- when a new client is calling an old server, it doesn't send any value and the default is
to use 3DES.
Finally, as this logic is able to handle overlapping wrapping algorithm between server and
client, the Option "--wrapping-algo" is hidden from "ipa vault-archive --help" and "ipa
vault-retrieve --help" commands.
Fixes: https://pagure.io/freeipa/issue/9259
Signed-off-by: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
On fedora 37+ the dnssec tests were broken. The tests
launched for each pull request were disabled or marked
as xfail.
With the bump of bind version, they should now succeed
and can be re-enabled.
Related: https://pagure.io/freeipa/issue/9216
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
On fedora37+, require at least bind 9.18.7-1 to avoid
dnssec regression (see BZ#2117342) related to bind and
OpenSSL 3.0 engine support.
Fixes: https://pagure.io/freeipa/issue/9216
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This was reported by Coverity as a potential issue. Passing
by name is the example that curl uses so switch to that to
quiet the warning.
Also change to a static function and pre-declare it to quiet a
compile-time warning.
https://pagure.io/freeipa/issue/9274
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Each token in an NSS database is likely to have its own
password/PIN. This allows the password to be set per token
available in the PKI password file.
This is necessary for HSM devices where the password is necessary
to access information about the private key (e.g. presence)
This may mean that to see all certificates in a given NSS database
one will need multiple instances of the NSSDatabase class, one for
each desired token (include None for the native token).
https://pagure.io/freeipa/issue/9273
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Add a guide explaining how to use the IPA API through Python. This
includes initializing the API, launching commands and retrieving
results, including batch operations.
Signed-off-by: Antonio Torres <antorres@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Extend the 'make api' target so that we also build an API Reference in
Markdown format. One template for each command gets generated. These
templates include all of the command details (arguments, options and
outputs), and then a section for manually-added notes such as semantics
or version differences. Every time the docs are regenerated, these notes
will be added if they exist.
Signed-off-by: Antonio Torres <antorres@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The ``ipa-client-install`` command now supports PKINIT for client
enrollment. Existing X.509 client certificates can be used to
authenticate a host.
Also restart KRB5 KDC during ``ipa-certupdate`` so KDC picks up new CA
certificates for PKINIT.
*Requirements*
- The KDC must trust the CA chain of the client certificate.
- The client must be able to verify the KDC's PKINIT cert.
- The host entry must exist. This limitation may be removed in the
future.
- A certmap rule must match the host certificate and map it to a single
host entry.
*Example*
```
ipa-client-install \
--pkinit-identity=FILE:/path/to/cert.pem,/path/to/key.pem \
--pkinit-anchor=/path/to/kdc-ca-bundle.pem
```
Fixes: https://pagure.io/freeipa/issue/9271
Fixes: https://pagure.io/freeipa/issue/9269
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
For testing purposes and uniformity, the 'Certificates'
table generated after a new certificate is added should
also have the 'name' attribute to be able to access its
value.
Fixes: https://pagure.io/freeipa/issue/8946
Signed-off-by: Carla Martinez <carlmart@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
For testing purposes and uniformity, the
'Certificates' label (located under
'Active users' settings ) should also have
'name' attribute, like seen in other parts of the WebUI.
Fixes: https://pagure.io/freeipa/issue/8946
Signed-off-by: Carla Martinez <carlmart@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
With MIT krb5 1.20, a call to krb5_db_check_allowed_to_delegate()
and krb5_db_check_allowed_to_delegate_from() expects to return either
KRB5KDC_ERR_BADOPTION for a policy denial or KRB5_PLUGIN_OP_NOTSUPP in
case plugin does not handle the policy case. This is part of the MIT
krb5 commit a441fbe329ebbd7775eb5d4ccc4a05eef370f08b which added a
minimal MS-PAC generator.
Prior to MIT krb5 1.20, the same call was expected to return either
KRB5KDC_ERR_POLICY or KRB5_PLUGIN_OP_NOTSUPP errors.
Related: https://pagure.io/freeipa/issue/9083
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The default ID generators used by PKI might change in the
future, so to preserve the current behavior the installation
code has been updated to explicitly use the legacy ID
generators by default.
Signed-off-by: Endi S. Dewata <edewata@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
There is a crash occurring that causes Keycloak to be unable to
communicate with ipa-tuura on the bridge server (replica0). This is
much more prevalent in Fedora 37 so we need to xfail that test case
until the crash is resolved.
Related: https://pagure.io/freeipa/issue/9264
Signed-off-by: Scott Poore <spoore@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
PAC requester check was incorrect for in-realm S4U operations. It casted
too wide check which denied some legitimate requests. Fix that by only
applying rejection to non-S4U unknown SIDs, otherwise S4U2Self request
issued by the in-realm service against a trusted domain's user would not
work.
Related: https://pagure.io/freeipa/issue/9083
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Julien Rische <jrische@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
With krb5 1.20, S4U processing code uses a special case of passing an
empty S4U proxy to allowed_to_delegate() callback to identify if the
server cannot get forwardable S4U2Self tickets according to [MS-PAC]
3.2.5.1.2.
This means we need to ensure NULL proxy is a valid one and return an
appropriate response to that.
Fixes: https://pagure.io/freeipa/issue/9083
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Julien Rische <jrische@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
For generating PAC we need to know SID of the object and a number of
required attributes. However, trusted domain objects do not have these
attributes. Luckily, IPA LDAP schema puts them under actual trust
objects which have all the additional (POSIX) attributes.
Refactor PAC generator to accept secondary LDAP entry and use that one
to pull up required attributes. We only use this for trusted domain
objects.
Fixes: https://pagure.io/freeipa/issue/9083
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Julien Rische <jrische@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
selinux-policy introduced a regression in fedora 36, rhel 8
and rhel 9. After a call to ipa trust-add, the credential cache
contains cifs/master.ipa.test@IPA.TEST instead of admin principal.
The fix is available in
- fedora 36: selinux-policy-36.16-1
- rhel 8: 3.14.3-107
Bump the selinux-policy version to install the fix.
Fixes: https://pagure.io/freeipa/issue/9198
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Adding test case to test_sso.py to cover login to IPA client as Keycloak
user without relying on external IdP.
create_bridge.py:
- getkeytab in setup_scim_server to allow bridge to use IPA API.
- fix unintstall to remove plugin by version instead of main
test_sso.py:
- add keycloak_add_user function
- add test_ipa_login_with_sso_user
tasks.py:
- add set_user_password to only set password for ipa users
Fixes: https://pagure.io/freeipa/issue/9250
Signed-off-by: Scott Poore <spoore@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The webui test test_subid_range_deletion_not_allowed is
adding a new subid for the admin user but a previous
test already took care of that step.
Remove the call adding the subid.
2nd issue: a given record has to be selected in
order to check that there is no "delete" button.
Fixes: https://pagure.io/freeipa/issue/9214
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Test scenario:
configure sssd with ldap_group_name = info for the trusted domain,
so that the group name is read from the "info" attribute
of the AD group entry.
With this setting, it is possible to have a group and a user
that appear on IdM side with the same name.
Ensure that the conflict does not break IdM and that the id,
getent group and getent passwd commands work on an IdM client.
Related : https://pagure.io/freeipa/issue/9127
Signed-off-by: Anuja More <amore@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Previously the message was:
"\n\nIn Directory Server, we offer one hash suitable for this "
"(PBKDF2_SHA256) and one hash\nfor \"legacy\" support (SSHA512)."
"\n\nYour configuration does not use these for password storage "
"or the root password storage\nscheme.\n"
but now the message is:
\n\nIn Directory Server, we offer one hash suitable for this "
"(PBKDF2-SHA512) and one hash\nfor \"legacy\" support (SSHA512)."
"\n\nYour configuration does not use these for password storage "
"or the root password storage\nscheme.\n"
PBKDF2_SHA256 has been replaced with PBKDF2-SHA512
Pagure: https://pagure.io/freeipa/issue/9238
Signed-off-by: Sumedh Sidhaye <ssidhaye@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
OpenLDAP has made it explicit to use default CA store as provided by
OpenSSL in 2016:
branches 2.5 and later:
commit 4962dd6083ae0fe722eb23a618ad39e47611429b
Author: Howard Guo <hguo@suse.com>
Date: Thu Nov 10 15:39:03 2016 +0100
branch 2.4:
commit e3affc71e05b33bfac43833c7b95fd7b7c3188f8
Author: Howard Guo <hguo@suse.com>
Date: Thu Nov 10 15:39:03 2016 +0100
This means starting with OpenLDAP 2.4.45 we can drop the explicit CA
configuration in ldap.conf.
There are several use cases where an explicit IPA CA should be specified
in the configuration. These mostly concern situations where a higher
security level must be maintained. For these configurations an
administrator would need to add an explicit CA configuration to
ldap.conf if we wouldn't add it during the ipa-client-install setup.
RN: FreeIPA client installer does not add explicit TLS CA configuration
RN: to OpenLDAP's ldap.conf anymore. Since OpenLDAP 2.4.45, explicit CA
RN: configuration is not required as OpenLDAP uses the default CA store
RN: provided by OpenSSL and IPA CA is installed in the default store
RN: by the installer already.
Fixes: https://pagure.io/freeipa/issue/9258
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Currently if a certificate mapping and matching rule has a typo or is of
an unsupported type the whole rule processing is aborted and the IPA
certmap plugin works without any rules effectively disabling PKINIT for
users. Since each rule would only allow more certificates for PKINIT it
would be more user/admin friendly to just ignore the failed rules with a
log message and continue with what is left or use the default rule if
nothing is left.
This change is done to add more flexibility to define new mapping and
matching templates which are e.g. needed to cover changes planned by
Microsoft as explained in
https://support.microsoft.com/en-us/topic/kb5014754-certificate-based-authentication-changes-on-windows-domain-controllers-ad2c23b0-15d8-4340-a468-4d4f3b188f16
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
While python-ldap is strict dependency of IPA in downstreams, it
is optional for IPA packages published on PyPI.
Openldap 2.6 no longer ships ldap_r-2, that makes
ipapython.dn_ctypes not working against such environments.
Thanks @abbra!
Fixes: https://pagure.io/freeipa/issue/9255
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Fedora 37 beta is now available, move the testing pipelines to
- fedora 37 for the _latest definitions
- fedora 36 for the _previous definition
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
The EXAMPLES section is missing .TP macros before some of
the provided examples, and they are displayed in the same paragraph.
Add .TP (tagged, indented paragraph) before each example.
Fixes: https://pagure.io/freeipa/issue/9252
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The creation of krb5.conf was moved to the end of the script
as part of maintaining server affinity during ipa-client-install.
If the installation is faster than replication then requests
against some IPA servers may fail because the client entry is
not yet present.
This is more difficult with certmonger as it will only use
/etc/krb5.conf. There is no way of knowing, even at the end
of the client installation, that replication has finished.
Certificate issuance may fail during ipa-client-install but
certmonger will re-try the request.
Fixes: https://pagure.io/freeipa/issue/9246
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
The tests must be updated to not expect the
deprecation warning messages for the 'idnssoaserial'
parameter. Those should (successfully) fail when
'dnszone_add' and 'dnszone_mod' commands are
executed with the SOA serial parameter provided.
Also, due to this SOA serial deprecation, an
expected-to-fail test should be defined when a
DNS zone is added (dnszone_add) and the SOA serial
is passed as a parameter.
Fixes: https://pagure.io/freeipa/issue/9249
Signed-off-by: Carla Martinez <carlmart@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
A warning message (regarding the SOA serial deprecation) is shown
on the webui and CLI every time a new DNS zone is added (even if the
'--serial' option is not being explicitly set) or the SOA serial is modified.
This should be managed by setting the 'idnssoaserial' as deprecated and
not required parameter.
Fixes: https://pagure.io/freeipa/issue/9249
Signed-off-by: Carla Martinez <carlmart@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
Scenario: call ipa otptoken-sync with
- an invalid password
- an invalid first token (containing non-digits)
- an invalid sequence of tokens
The test expects a return code = 1.
Related: https://pagure.io/freeipa/issue/9248
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The command ipa otptoken-sync does not properly handle
errors happening during the synchronization step.
- Even if an error is detected (such as invalid password
provided), the command exits with return code = 0. An
error message is displayed but the exit code should be 1.
- When an invalid token is provided, the token is not
synchronized but the error is not reported back to the
ipa otptoken-sync command.
The first issue can be fixed by raising an exception when
the HTTP response contains an header with an error.
The second issue is fixed by returning LDAP_INVALID_CREDENTIALS
to ldap bind with the sync control if synchronization fails.
Fixes: https://pagure.io/freeipa/issue/9248
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
A temporary krb5.conf is created early during client enrollment
and was previously used only during the initial ipa-join call.
The final krb5.conf was written soon afterward.
If there are multiple servers it is possible that the client
may then choose a different KDC to connect. If the client
is faster than replication then the client may not exist
on all servers and therefore enrollment will fail.
This was seen in performance testing of how many simultaneous
client enrollments are possible.
Use a decorator to wrap the _install() method to ensure the
temporary files created during installation are cleaned up.
https://pagure.io/freeipa/issue/9228
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
ipa-cacert-manage prune is removing the expired certs one
at a time and this may result in verifying that one of
the expired certs is still valid.
As a consequence, ipa-cacert-manage prune always fails
when more than 1 cert are expired.
To avoid the issue, remove all the expired certs in a single
pass, and validate only the ones that would remain after full
pruning.
Fixes: https://pagure.io/freeipa/issue/9244
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
In the 'Sudo rules' page, the 'Sudo order' column should be visible in the
list so the users can easily see which rules override other rules based on
their order.
Fixes: https://pagure.io/freeipa/issue/9237
Signed-off-by: Carla Martinez <carlmart@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
It was defined as an unsigned value (2**32) because it
originally was. During the review an additional setting of
disabled (-1) was added so the value needed to be signed.
The upper bound needs to be 2**31 which is provided by
the xmlrpc client MAXINT import.
Fixes: https://pagure.io/freeipa/issue/9243
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
The test_selinuxusermap.py::test_selinuxusermap::test_misc is failing
because the 'delete_record' function (located in the same file) is passing
incorrect parameters: it should take the 'pkeys' instead of the full
data.
The changes will take the right 'pkeys' parameters in the 'test_misc()'
function.
Fixes: https://pagure.io/freeipa/issue/9161
Signed-off-by: Carla Martinez <carlmart@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Added OnActiveSec=12h to start the timer cycle because OnUnitActiveSec setting alone never triggers the timer after boot as there has not been transition between active and inactive state.
Removed [Install] section from sweeper.service as it is not needed
Fixes: https://pagure.io/freeipa/issue/9231
Signed-off-by: Jesse Sandberg <jesse.sandberg@netcode.fi>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
oauth2_on_child_readable() does not use the main verto context and used
to drop the argument name to signify that. This is a feature of C2X
standard by default and is not enabled in gcc before 11 by default (it
is enabled in RHEL 8's gcc 8.5).
Add a simple 'if the context is missing, get out' code to use 'ctx'.
This allows to avoid enabling C2X features.
Initialize local pointers to prevent use before initialization on exit
paths in abnormal situations as well.
Fixes: https://pagure.io/freeipa/issue/9230
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
When Kerberos principal alias is used to login to a Web UI, we end up
with a request that is authenticated by a ticket issued in the alias
name but metadata processed for the canonical user name. This confuses
RPC layer of Web UI code and causes infinite loop to reload the page.
Fix it by doing two things:
- force use of canonicalization of an enterprise principal on server
side, not just specifying that the principal is an enterprise one;
- recognize that a principal in the whoami()-returned object can have
aliases and the principal returned by the server in the JSON response
may be one of those aliases.
Fixes: https://pagure.io/freeipa/issue/9226
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Armando Neto <abiagion@redhat.com>
The module installs and configures a Keycloak server and
not just the Quarkus Java framework. So, renaming to better
reflect what the module is used for.
Fixes: https://pagure.io/freeipa/issue/9225
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
New group password policies will get -1 (unlimited) on creation
by default.
Existing group password policies will remain untouched and
those created prior will be treated as no BIND allowed.
Fixes: https://pagure.io/freeipa/issue/9212
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
IPA DNS zone and forwardzone commands allow to use nameservers with ports
as "SERVER_IP port PORT_NUMBER". bind is supporting this syntax, but the
Resolver in dnspython that is used to verify the list of forwarders
(nameservers) is only allowing to have IP addresses in this list. With
dnspython version 2.20 there is a new validator in dns.resolver.BaseResolver
that ensures this.
Refs:
- https://bind9.readthedocs.io/en/v9_18_4/reference.html#zone-statement-grammar
- https://github.com/rthalley/dnspython/blob/master/dns/resolver.py#L1094
ipapython/dnsutil.DNSResolver derives from dns.resolver.Resolver. The setter
for nameservers has been overloaded in the DNSResolver class to split out
the port numbers into the nameserver_ports dict { SERVER_IP: PORT_NUMBER }.
After the setter for nameservers succeeded, nameserver_ports is set.
nameserver_ports is used in the resolve() method of dns.resolver.Resolver.
Additional tests have been added to verify that nameservers and also
nameserver_ports are properly set and also valid.
Fixes: https://pagure.io/freeipa/issue/9158
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Because the sidgen plugin is a postop plugin, it is not
always triggered before the result of an ADD is returned
and the objectclasses of the user may / may not contain
ipantuserattrs.
Fix the expected object classes.
Related: https://pagure.io/freeipa/issue/9062
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
There are currently three sets of CA schema changes applied
in ipa-server-upgrade:
* addition of ACME schema
* addition of certificate profile schema
* addition of lightweight CA schema
None of these require a restart of the CA to be supported.
There is an issue in schema parsing such that it doesn't handle
X-ORIGIN properly. A difference is detected and a change applied
but no change is recorded in LDAP so every time upgrade is
run it thinks a CA restart is needed. The CA is not quick to
restart so avoiding one is best, particularly when the update is
run as part of an rpm transaction where a user with an itchy finger
may think things have hung and break out of it.
https://github.com/389ds/389-ds-base/issues/5366 was
filed to track this.
Related: https://pagure.io/freeipa/issue/9204
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The test TestInstallDNSSECFirst is failing because of one of its
dependencies (the most likely suspect is the update of openssl-pkcs11).
Disable the test from azure gating until the issue is solved.
Related: https://pagure.io/freeipa/issue/9216
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
The test test_integration/test_subids.py::TestSubordinateId
needs a master and a client but the yaml definition for rawhide
and sssd is currently using master_1repl. Replace with
master_1repl_1client to fulfill the requirement.
Fixes: https://pagure.io/freeipa/issue/9217
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
There was no support for setting the grace login limit on the WebUI. The
only way to so was only via CLI:
`ipa pwpolicy-mod --gracelimit=2 global_policy`
Thus, the grace login limit must be updated from the policy section and
this will reflect also on the user settings (under the 'Password Policy'
section)
Fixes: https://pagure.io/freeipa/issue/9211
Signed-off-by: Carla Martinez <carlmart@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
New Tests include
TestRSNPKIConfig
TestRSNVault
The new tests are just extending existing classes to be run
with random serial numbers enabled
The tests also include a new method to check params set in CS.cfg for both CA and
KRA, and another test to check Random Serial Number version while
running `ipa ca-find`
Added nightly definitions
Related Ticket: https://pagure.io/freeipa/issue/2016
Signed-off-by: Sumedh Sidhaye <ssidhaye@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This testcase checks that when ipa-client-install command
is run with --subid option, /etc/nsswitch.conf file is updated
with the below entry
subid: nss
Related: https://pagure.io/freeipa/issue/9159
Since the newly added testsuite required client
system, hence modified the below yaml files to change the topology
from *master_1repl to *master_1repl_1client in the below files
gating.yaml
nightly_latest.yaml
nightly_latest_selinux.yaml
nightly_latest_testing.yaml
nightly_previous.yaml
nightly_rawhide.yaml
Signed-off-by: Sudhir Menon <sumenon@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Originally the code treated 0 as disabled. This was
changed during the review process to -1 but one remnant
was missed effetively allowing gracelimit 0 to also mean
disabled.
Add explicit tests for testing with gracelimit = 0 and
gracelimit = -1.
Also remove some extranous "str(self.master.domain.basedn)"
lines from some of the tests.
Fixes: https://pagure.io/freeipa/issue/9206
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
With some recent changes the Azure Agent has decreased performance.
For example, `InstallDNSSECFirst_1_to_5` (5 subjobs) job took ~33min
and now it takes ~40min. In the same time there are jobs having only
1 or 2 subjobs and they should be used more.
Fixes: https://pagure.io/freeipa/issue/9207
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This script allows developers to check if prci definition jobs have the correct format,
which is defined in prci_jobs_spec.yaml
Useful when adding new jobs to the definitions.
Signed-off-by: David Pascual <davherna@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
An ACI with rights of read, write, search and/or compare without
attributes to apply the rights to is effectively a no-op. Allow
the ACI to be created but include a warning. Ignore the add
and delete rights. While they make no sense in the context of
the other rights we should still warn that they are a no-op
with no attributes.
Use the existing make_aci() object method to create the
message and update the add/mod callers to capture and add the
message to the result if one is provided.
When updating an existing ACI the effective attributes will
not be included so fall back to the attributes in the resulting
permission.
Prior to checking for rights and attributes convert any deprecated
names for older clients into the newer values needed by make_aci
This is exercised by existing xmlrpc permission tests that
create such permissions without attributes.
https://pagure.io/freeipa/issue/9188
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Pagination size must be required, the current validators are triggered after
form is submitted, thus the only way for check if data is not empty is by making
the field required.
Fixes: https://pagure.io/freeipa/issue/9192
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The nightly test test_external_idp requires a topology
with 2 replicas. Fix the definition in nightly_latest_sssd.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
In the memory check failure message, add a hint to the administrator
that they can use the --skip-mem-check flag to skip the check.
Related: https://pagure.io/freeipa/issue/8404
Signed-off-by: Fraser Tweedale <frase@frase.id.au>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
-b and --best are the same option (see dnf(8)). Remove -b and keep
--best, because --best is more descriptive.
Signed-off-by: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Defined the tests that will be executed for SSSD's COPR nightly.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Currently the cert_dir attribute is only present if IPA installation was
done. If IPA was not installed the attribute does not exist.
In order that the uninstall code finds the attribute a class attribute
is added.
Pagure Issue: https://pagure.io/freeipa/issue/9179
Signed-off-by: Sumedh Sidhaye <ssidhaye@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The user's pwd expiration was retrieved but inadvertently was never
compared to current time. So any LDAP bind, including from the
IPA API, counted against the grace period. There is no need to go
through the graceperiod code for non-expired passwords.
https://pagure.io/freeipa/issue/1539
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
# There are Jinja yaml templates, which differ from reqular ones. These
# files should be placed on skip list (YAML_TEMPLATE_FILES), otherwise
# safe_load fails.
# Also check PRCI definitions yaml files jobs format and content with
# prci_checker script
.PHONY:yamllint
yamllint:
YAML_TEMPLATE_FILES="\
@@ -357,7 +363,10 @@ yamllint:
echo$${YAML};\
$(PYTHON) -c "import yaml; f = open('$${YAML}'); yaml.safe_load(f); f.close()"||{echo Your YAML file: $${YAML} has a wrong syntax or this is a Jinja template. In the latter clause, consider to add your YAML file to the YAML_TEMPLATE_FILES list in Makefile.am.;exit 1;}\
@@ -166,6 +166,9 @@ Specifies the mount point that the development server will register. The default
.B oidc_child_debug_level <debuglevel>
Specifies the debug level of \fBoidc_child\fR, a helper process used by \fBipa-otpd\fR for OIDC/OAuth2 authentication. Level can be between 0 and 10, the higher the more details. If the level is 6 or higher HTTP debug output is added as well.
.TP
.B passkey_child_debug_level <debuglevel>
Specifies the debug level of \fBpasskey_child\fR, a helper process used by \fBipa-otpd\fR for passkey authentication. Level can be between 0 and 10, the higher the more details. If the level is 6 or higher libfido2 debug output is added as well.
.TP
.B prompt_all <boolean>
Specifies that all options should be prompted for in the IPA client, even optional values. Default is False.
@@ -86,6 +86,9 @@ Time to wait, in milliseconds, between each e-mail sent to try to avoid overload
Specifies the From: e-mail address value in the e-mails sent. The default is noreply@ipadefaultemaildomain. This value can be found by running
.I ipa config-show
.TP
.B mail_from_name <name>
Specifies the From: name value in the e-mails sent. The default is IPA-EPN.
.TP
.B notify_ttls <list of days>
This is the list of days before a password expiration when ipa-epn should notify a user that their password will soon require a reset. If this value is not specified then the default list will be used: 28, 14, 7, 3, 1.
@@ -11,7 +11,7 @@ Configures a client machine to use IPA for authentication and identity services.
By default this configures SSSD to connect to an IPA server for authentication and authorization. Optionally one can instead configure PAM and NSS (Name Switching Service) to work with an IPA server over Kerberos and LDAP.
An authorized user is required to join a client machine to IPA. This can take the form of a kerberos principal or a one\-time password associated with the machine.
An authorized account is required to join a client machine to IPA. This can take the form of a kerberos principal, a one\-time password associated with the machine, or PKINIT identity associated with the machine.
This same tool is used to unconfigure IPA and attempts to return the machine to its previous state. Part of this process is to unenroll the host from the IPA server. Unenrollment consists of disabling the principal key on the IPA server so that it may be re\-enrolled. The machine principal in /etc/krb5.keytab (host/<fqdn>@REALM) is used to authenticate to the IPA server to unenroll itself. If this principal does not exist then unenrollment will fail and an administrator will need to disable the host principal (ipa host\-disable <fqdn>).
@@ -229,6 +229,22 @@ first. When this option is not specified, \fBipa\-client\-install\fR will back
up SSSD config and create new one. The back up version will be restored during
uninstall.
.SS"PKINIT OPTIONS"
.TP
\fB\-\-pkinit\-identity=\fIDENTITY\fR
Identity string for PKINIT authentication to use to join the IPA realm,
for example 'FILE:/path/to/cert.pem,/path/to/key.pem'. See krb5.conf(5)
for more information. The option is mutually exclusive with
\fB\-\-password\fR and \fB\-\-keytab\fR.
.TP
\fB\-\-pkinit\-anchor\fR=\fIFILEDIR\fR
Trust anchors (root and intermediate CA certs) for PKINIT. \fIFILEDIR\fR is
either the absolute path to a PEM bundle (for example
'FILE:/etc/pki/tls/cert.pem') or to an OpenSSL hash directory (for example
'DIR:/etc/ssl/certs/'). The option can be used multiple times. PKINIT
requires the full trust chain of the Kerberos KDC server as well as the full
trust chain of the identity certificate.
.SS"UNINSTALL OPTIONS"
.TP
\fB\-\-uninstall\fR
@@ -237,6 +253,12 @@ Remove the IPA client software and restore the configuration to the pre\-IPA sta
\fB\-U\fR, \fB\-\-unattended\fR
Unattended uninstallation. The user will not be prompted.
.SH"DISABLED SERVICES"
.TP
ipa-client-install will automatically disable the Name Service Caching Daemon (nscd) when configuring the SSSD client. These are competing services and cannot co-exist.
.TP
If there are other similar services providing nss capabilities they will need to be manually disabled by the user. An example is unscd, a complete replacement for nscd.
.SH"FILES"
.TP
Files that will be replaced if SSSD is configured (default):
a list of arguments and options passed to the IPA API command, provided in JSON
format. Credentials are filtered out.
.LP
All explicitly requested operations logged. Internal operations, initiated as
part of execution of the explicitly requested IPA API calls, aren't logged. For
HTTP end-point operations will be logged as performed by the '/mod_wsgi'
executable binary. Remaining details can be inspected through the systemd
journal as journald records execution context. See systemd.journal\-fields(7)
for details.
The details of the individual logged messages can be explained with the help of
'\fBjournalctl -x\fR' command, while full set of logged properties can be
retrieved with '\fBjournalctl -o json-pretty\fR'. See journalctl(1) for details
on the systemd journal viewer.
For the sample message above, an explanation could be requested with '\fBjournalctl -x -g ldap2_140328582446688\fR' where LDAP backend connection instance identifier can be used to uniquely fetch that individual message.
.SH"EXAMPLES"
.TP
\fBipa help commands\fR
Display a list of available commands
.TP
\fBipa help topics\fR
Display a high\-level list of help topics
.TP
\fBipa help user\fR
Display documentation and list of commands in the "user" topic.
[//]: # (THE CONTENT BELOW IS GENERATED. DO NOT EDIT.)
.. _File:
# File
[//]: # (ADD YOUR NOTES BELOW. THESE WILL BE PICKED EVERY TIME THE DOCS ARE REGENERATED. //end)
Text file parameter type.
Accepts file names and loads their content into the parameter value.
Loaded 100 of 1099 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
zpericic
Rob Crittenden
Sudhir Menon
Florence Blanc-Renaud
Mohammad Rizwan
Alexander Bokovoy
Mark Reynolds
Julien Rische
Anuja More
Shunsuke matsumoto
Thomas Woerner
TAKAHASHI Masatsuna
Antonio Torres
Erik Belko
Francisco Trivino
Pavel Březina
Rafael Guterres Jeffman
Stanislav Levin
Christian Heimes
Weblate Translation Memory
김인수
Temuri Doghonadze
Rafael Fontenelle
Emilio Herrera
Weblate
Andika Triwidada
Yuri Chornoivan
Piotr Drąg
Jan KuparinenandRicky Tigg
Masahiro Matsuya
Carla Martinez
007hacky007
zoedong
Thorsten Scherf
Endi S. Dewata
Jeremy Frasier
Viktor Ashirov
Alexandra Nikandrova
Simon Nussbaum
Miro Hrončok
Iker Pedrosa
Sumit Bose
Jerry James
Michal Polovka
s1341
mbhalodi
Timo Aaltonen
Todd Zullinger
Jarl Gullberg
David Pascual
Chris Kelley
Lenz Grimmer
Filip Dvorak
Scott Poore
Nikola Knazekova
Sumedh Sidhaye
Viacheslav Sychov
Alexey Tikhonov
Jesse Sandberg
Armando Neto
Fraser Tweedale